Hotpoint FA2 841 JH BL HA Handleiding

Hotpoint Oven FA2 841 JH BL HA

Lees hieronder de 📖 handleiding in het Nederlandse voor Hotpoint FA2 841 JH BL HA (20 pagina's) in de categorie Oven. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

Quick guide

CONTROL PANEL DESCRIPTION

1. SELECTION KNOB

For switching the oven on by selecting

a function.

Turn to the position to switch the

oven off.

2. LIGHT

With the oven switched on, press to

turn the oven compartment lamp on or

off.

3. SETTING THE TIME

For accessing the cooking time settings,

delayed start and timer. For displaying

the time when the oven is off.

4. DISPLAY

5. ADJUSTMENT BUTTONS

For changing the cooking time settings.

6. THERMOSTAT KNOB

Turn to select the temperature you

require when activating manual

functions.

For automatic functions use .

Please note: All knobs are push-activated

knobs. Push down on the centre of the

knob to release it from its seating.

1 32 4 5 6

SLIDING RUNNERS AND SHELF GUIDES

Before using the oven remove the protective tape [a] and

then remove the protective foil [b] from the sliding runners.

REMOVING THE SLIDING RUNNERS [c]

Pull the lower part of the sliding runner to uncouple the

lower hooks (1) and pull the the sliding runners upwards,

removing them from the upper hooks (2).

REFITTING THE SLIDING RUNNERS [d]

Hook the upper hooks on the shelf guides (1) then press the

lower part of the sliding runners against the shelf guides, until

the lower hooks are clicking (2).

[c] [d]

REMOVING AND REFITTING THE SHELF GUIDES

1. To remove the shelf guides, firmly grip the external part of

the guide, and pull it towards you to extract the support and

the two internal pins from the lodging.

2. To reposition the shelf guides, position them near the

cavity and initially insert the two pins into their lodgings.

Next, position the external part near its lodging, insert the

support, and firmly press towards the wall of the cavity to

make sure the shelf guide is properly secured.

FIRST TIME USE

1. SETTING THE TIME

You will need to set the time when you switch on the

appliance for the first time: press icon and until the

the two digits for the hour start flashing on the display.

Use or to set the hour and press to confirm. The two

digits for the minutes will start flashing. Use or to set

the minutes and press to confirm.

Please note: When the icon is flashing, for example following

lengthy power outages, you will need to reset the time.

2. HEAT THE OVEN

A new oven may release odours that have been left behind

during manufacturing: this is completely normal.

Before starting to cook food, we therefore recommend

heating the oven with it empty in order to remove any

possible odours.

Remove any protective cardboard or transparent film from

the oven and remove any accessories from inside it.

Heat the oven to 250 ° C for about one hour. The oven must

be empty during this time.

Please note: It is advisable to air the room after using the appliance

for the first time.

THANK YOU FOR BUYING A HOTPOINT-

ARISTON PRODUCT

In order to receive a more complete

assistance, please register your product on

www . hotpoint . eu/register

Before using the appliance carefully read the Safety

Instruction.

FUNCTIONS & DAILY USE

CONVENTIONAL

For cooking any kind of dish on one shelf only.

FORCED AIR

For cooking different foods that require the same

cooking temperature on several shelves (maximum three) at

the same time. This function can be used to cook different

foods without odours being transferred from one food to

another.

MAXI COOKING

For cooking large joints of meat (above 2.5 kg).

We recommend turning the meat over during cooking to

ensure that both sides brown evenly. We also recommend

basting the joint every so often to prevent it from drying out

excessively.

PIZZA

For baking different types and sizes of pizza and bread.

It is a good idea to swap the position of the baking plates

halfway through cooking.

GRILL

For grilling steaks, kebabs and sausages, cooking

vegetables au gratin or toasting bread. When grilling meat,

we recommend using a drip tray to collect the cooking juices:

Position the tray on any of the levels below the wire shelf and

add 200 ml of drinking water.

TURBO GRILL

For roasting large joints of meat (legs, roast beef,

chicken). We recommend using a drip tray to collect the

cooking juices: position the pan on any of the levels below

the wire shelf and add 200 ml of drinking water.

RISING

For helping sweet or savoury dough to rise effectively.

To maintain the quality of proving, do not activate the

function if the oven is still hot following a cooking cycle.

ECO FORCED AIR*

For cooking roasts and stuffed roasting joints on a

single shelf. Food is prevented from drying out excessively

by gentle, intermittent air circulation. When this ECO MODE

function is in use, the light will remain switched off during

cooking but can be switched on again by pressing .

BREAD AUTO

This function automatically selects the ideal

temperature and baking time for bread. For best results,

carefully follow the recipe. Activate the function when the

oven is cold.

PASTRY AUTO

This function automatically selects the ideal

temperature and baking time for cakes. Activate the function

when the oven is cold.

DIAMOND CLEAN

The action of the steam released during this special

low-temperature cleaning cycle allows dirt and food residues

to be removed with ease. Pour 200 ml of drinking water on

the bottom of the oven and only activate the function when

the oven is cold.

* Function used as reference for the energy efficiency declaration in

accordance with Regulation (EU) No.65 / 2014

1. SELECT A FUNCTION

To select a function, turn the to the symbolselection knob

for the function you require: the display will light up and an

audible signal will sound.

2. ACTIVATE A FUNCTION

MANUAL

To start the function you have selected, turn the thermostat knob

to set the temperature you require.

Please note: During cooking you can change the function by

turning the or adjust the temperature by turning the selection knob

thermostat knob.

The function will not start if the thermostat knob is on 0 °C. You can

set the cooking time, cooking end time (only if you set a cooking

time) and a timer.

AUTOMATIC

To start the automatic function you have selected (“Bread”

or “Dessert”), keep the thermostat knob at the position for

automatic functions ( ).

To finish cooking, turn the to position 0.selection knob

Please note: You can set the cooking end time and timer.

RISING

To start the “Rising” function, turn the thermostat knob to the

relevant symbol; if the oven is set to a different temperature,

the function will not start.

Please note: You can set the cooking time, cooking end time (only

if you set a cooking time) and a timer.

3. PREHEATING AND RESIDUAL HEAT

Once the function starts, an audible signal and a flashing

icon on the display indicate that the preheating phase has

been activated.

At the end of this phase, an audible signal and the fixed icon

on the display will indicate that the oven has reached

the set temperature: at this point, place the food inside and

proceed with cooking.

Please note: Placing the food in the oven before preheating has

finished may have an adverse effect on the final cooking result.

After cooking and with the function deactivated, the icon

may continue to remain visible on the display even after the

cooling fan has switched off to indicate that there is residual

heat in the compartment.

Please note: The time after which the icon switches off varies

because it depends on a series of factors such as ambient

temperature and function used. In any case, the product should be

considered to be off when the pointer on the selection knob is at

“0”.

4. PROGRAMMING COOKING

You will need to select a function before you can start

programming cooking.

DURATION

Keep pressing until the icon and “00:00” start flashing

on the display.

Use or to set the cooking time you require, then press

to confirm.

Activate the function by turning the thermostat knob to the

temperature you require: an audible signal will sound and the

display will indicate that cooking is complete.

Notes: To cancel the cooking time you have set, keep pressing

until the icon starts flashing on the display, then use to reset

the cooking time to “00:00”.

This cooking time includes a preheating phase.

PROGRAMMING THE END COOKING TIME/DELAYED

START

After a cooking time has been set, starting the function can

be delayed by programming its end time: press until the

icon and the current time start flashing on the display.

Use or to set the time you want cooking to end and

press to confirm.

Activate the function by turning the thermostat knob to the

temperature you require: the function will remain paused

until it starts automatically after the period of time that has

been calculated in order for cooking to finish at the time you

have set.

Please note: To cancel the setting, switch the oven off by turning

the to position “selection knob ”.

END OF COOKING

An audible signal will sound and the display will indicate that

the function has finished.

Turn the selection knob to select a different function or to

position “ ” to switch the oven off.

Please note: If the timer is active, the display will show “END”

alternately with the remaining time.

5. SETTING THE TIMER

This option does not interrupt or program cooking but

allows you to use the display as a timer, either during while a

function is active or when the oven is off.

Keep pressing until the icon and “00:00” start flashing

on the display.

Use or to set the time you require and press to

confirm.

An audible signal will sound once the timer has finished

counting down the selected time.

Notes: To cancel the timer, keep pressing until the icon starts

flashing, then use to reset the time to “00:00”.

6. DIAMOND CLEAN FUNCTION

To activate the “Diamond Clean” cleaning function, pour 200

ml of drinking water into the bottom of the oven, then turn the

selection knob thermostat knob and the to the icon.

Please note: The position of the icon does not correspond to the

temperature reached during the cleaning cycle.

The function will activate automatically: the display shows

the time remaining to the end, alternating with “DC”.

Please note: It is only possible to programme the end time of this

function. The duration is automatically set to 35 minutes.

COOKING TABLE

RECIPE FUNCTION PREHEAT TEMPERATURE

(°C)

DURATION

(MIN)

LEVEL AND

ACCESSORIES

Leavened cakes

Yes 170 30 - 50 2

Yes 160 30 - 50 2

Yes 160 40 - 60 4 1

Biscuits/tartlets

Yes 160 25 - 35 3

Yes 150 35 - 45 4 2

Pizza / Focaccia

Yes 190 - 250 15 - 50 1/2

Yes 190 - 250 20 - 50 4 2

Delay to start functionality is not available for Grill and Turbo

Grill functions.

Product specificaties

Merk:	Hotpoint
Categorie:	Oven
Model:	FA2 841 JH BL HA
Apparaatplaatsing:	Ingebouwd
Soort bediening:	Rotary, Buttons
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	27100 g
Breedte:	595 mm
Diepte:	551 mm
Hoogte:	595 mm
Opwarmfunctie:	Nee
Grill:	Ja
Wi-Fi-besturing:	Nee
Energie-efficiëntieklasse:	A+
Verlichting binnenin:	Ja
Convectie koken:	Ja
Totale binnen capaciteit (ovens):	- l
Aantal ovens:	1
Controle positie:	Front / Top front
Installatie compartiment breedte:	568 mm
Installatie compartiment diepte:	560 mm
Installatie compartiment hoogte:	601 mm
Soort reiniging:	Hydrolytisch
Stroom:	13 A
Installatie compartiment hoogte (min):	600 mm
Energieverbruik (conventioneel):	0.89 kWu
Energieverbruik (geforceerde convectie):	0.69 kWu
Grootte oven:	Middelmaat
Soort oven:	Elektrische oven
Totaal vermogen van de oven:	2900 W
Netto capaciteit oven:	71 l
Zelfreinigend:	Ja
Indrukbare knoppen:	Ja
Installatiecompartiment breedte (min):	560 mm
Pizzafunctie:	Ja
Reinigingstechnologie:	Hydrolytisch
Brood maak mogelijkheid:	Ja
ECO mode:	Ja
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Energie-efficiëntieschaal:	A+++ tot D
Brood & deeg maken programma's:	Gistend