Hotpoint NM11 1064 WC A UK N Handleiding

Hotpoint Wasmachines NM11 1064 WC A UK N

Bekijk gratis de handleiding van Hotpoint NM11 1064 WC A UK N (4 pagina’s), behorend tot de categorie Wasmachines. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Hotpoint NM11 1064 WC A UK N of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
GB
Quick Guide
THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.
To receive more comprehensive assistance, register the
appliance on
www.hotpoint.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
* By selecting thecycle and excluding the spin cycle, the washing machine will Spin & Drain
drain only.
** The duration of the wash cycles can be checked on the display.
***For Prewash press the “Temp. button until the symbol lights up (only 90°).
****
After programme end and spinning with maximum selectable spin speed, in default
programme setting.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as the
temperature and pressure of the incoming water, ambient temperature, amount of detergent,
load quantity and type, load balancing and any additional options selected.The values given
for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient
programme in terms of energy and water consumption for washing normally soiled cotton laundry.
Note: spin speed values shown on the display can slightly differs from the values stated in the table.
For all testing institutes:
2) Long cotton cycle: set wash cycle Cotton with a temperature of 40°C.
3) Long synthetics cycle: set wash cycle with a temperature of 40°C.Synthetics
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
Maximum load 10 kg
Power input in o mode 0.5 W / in left-on mode 8 WAdd
Gar-
ments
( )
Detergents and
Additives
Recommended
detergent
Residual
dampness % (****)
Energy
consumption kWh
Total water lt
Laundry
temperature °C
Wash cycle
Temperature Max.
spin speed
(rpm)
Max.
load
(kg)
Dura-
tion
(h : m)
Pre-
wash Wash Fabric
softener Pow-
der Liquid
Setting Range1 23
Eco 40-60 (1) 40 °C40°C
155110,0 3:59440,95 6030
15515,0 3:00440,70 6032
15512,5 2:35440,45 4321
Cotton (2) 40°C - 60°C160010,03:55491,14 10745
Synthetics (3) 40°C - 60°C12005,52:55350,83 8043
Mixed 40°C - 40°C160010,0** – – –
Delicates 40°C - 40°C10005,5** – –
White 40°C - 90°C160010,02:05(***) 540,90 10042
Anti Stain 40° 40°C - 40°C10005,5**  – – –
Rapid 30 min 30°C - 30°C12005,5 0:30  710,21 5027
Spin & Drain *160010,0**– –– – –
Rinse & Spin 160010,0 **– –
Steam Refresh2,0**– –– – –
20°C 20 °C - 20 °C160010,01:50550,20 9522
Wool 40°C - 40°C8002,5 **– –
Anti Allergy 60°C 40°C -
60°C 16005,5 ** – –
Bed & Bath 60°C - 60°C160010,0**  – –
  Dosing required Dosing optional
DETERGENT DISPENSER DRAWER
compartment 1: Pre-wash detergent
(powder)
compartment 2: Detergent for the wash
cycle (powder or liquid)
If liquid detergent is used, it is recommended
that the removable plastic partition A
(supplied) be used for proper dosage.
If powder detergent is used, place the partition
into slot B.
compartment 3: Additives (fabric softeners,
etc.)
The fabric softener should not overow the grid.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
2
3
A
B
1. STEAM HYGIENE / MUTE button
2. FINAL CARE / KEY LOCK button
3. ON/OFF button
4. ACTIVE CARE button and indicator light
5. START/PAUSE button
6. RAPID / GREEN button
7. SPIN button
8. START DELAY button
9.TEMPERATURE button
10.WASH CYCLE SELECTOR KNOB
1 2
4
56789
3
10
DISPLAY

Beoordeel deze handleiding

4.3/5 (2 Beoordelingen)

Product specificaties

Merk: Hotpoint
Categorie: Wasmachines
Model: NM11 1064 WC A UK N

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint NM11 1064 WC A UK N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden