HOTEC K25 Handleiding


Bekijk gratis de handleiding van HOTEC K25 (6 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.6 sterren uit 4.5 reviews. Heb je een vraag over HOTEC K25 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/6
Quick Start Guide
For Hotec K Series Wireless Microphones
Thanks for purchasing Hotec K Series Wireless Microphone. Please read through this user
manual carefully before use.
SYSTEM COMPONENTS
K25
Recever x 1
Headset microphone x 2
Power adapter x 1
Mic cable (1/4” to 1/4”) x 1
Lapel lavalier microphone x 2
USB charging cable x 2
K25
K26
Receiver x 1
Handheld microphone x 2
Power adapter x 1
Mic cable (1/4” to 1/4”) x 1
AA baery x 4
Hotec
®
is the registered trademark of Shenzhen Tecson Trade and Technolgy Co., Ltd.
K26
PREPARATION BEFORE USE
1. Install the right and left antenna in the Receiver.
2. Plug the power cable in the DC jack of the Receiver.
3. Connect the Receiver with your sound device like mixer, acve speaker or amplier using the
audio cable.
4. For K26, install 2 AA baeries in each handheld microphone.
5. For K25, choose the lapel lavalier microphone or the headset microphone and plug it in the
mic jack in the Bodypack transmiers. Make sure the Bodypack transmier is charged and
has suicient power.
OPERATION GUIDE
This UHF wireless microphone system has 64 frequencies for selecon. This system supports
mulple sets to be used simultaneously.
1. K26: Single system operaon instrucons
Here are the operaon instrucons if you have ONE set of K26.
a) Turn on the Receiver and the handheld microphone aer the above preparaons are
done, you are ready to go.
b) In case you nd any interference, press the Hi/Lo buon in the battery compartment of
the Handheld microphone to change the frequency unl you nd an appropriate one.
The Receiver will get paired with the Handheld microphone automacally.
c) Turn the volume knob in the Receiver to change the microphone volume. The le
volume knob is for Channel A and the right volume knob is for Channel B.
2. K26: Mul systems operaon instrucons
In case you are having more than one sets working together, here are addional steps
to follow to avoid interference with each other.
a) Select an appropriate frequency from the Handheld microphone for each set, press the
upper/lower buon of the receiver at the same me to lock the frequency. Then, the
Receiver works with the microphone at this locked frequency.
b) If you want to change the frequency again, press the upper/lower buon of the
receiver again to unlock, then repeat step a) above for a dierent frequency.
c) Make sure each set is working at different frequencies.
3. K25: Single system operaon instrucons
Here are the operaon instrucons if you have ONE set of K25.
a) Turn on the Receiver and the Bodypack transmitter aer the above preparaons are
done, you are ready to go.
b) In case you nd any interference, press the Right/Le button of the Bodypack
transmier together to change the frequency unl you nd an appropriate one. The
Receiver will get paired with the Bodypack transmier automacally.
c) Press the Right or Le Button of the Body pack transmitter to change the microphone
volume. Right for volume up and Le for Volume down. You can also turn the volume


Product specificaties

Merk: HOTEC
Categorie: Microfoon
Model: K25

Heb je hulp nodig?

Als je hulp nodig hebt met HOTEC K25 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden