Honeywell V8043E Handleiding
Pagina's 20 Niet gecategoriseerd
Bekijk de handleiding van Honeywell V8043E gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
PRODUCT DATA
60-2133-12
V4043A,B,E,J; V4044A,B;
V8043A,B,E,F,J; V8044A,B,E
Motorized Valves
APPLICATION
These valves consist of an actuator motor and valve
assembly for controlling the flow of hot or cold water, or
steam.
IMPORTANT
These valves are not for use in systems containing
dissolved oxygen.
FEATURES
•The V4043 and V8043 provide 2-position, straight-
through control of water.
•The V4044 and V8044 provide 2-position diverting
control of water.
•Compact construction for easy installation.
•Manual opener for valve operation on power failure.
Valve returns to automatic position when power is
restored.
•Choice of sweat or flare fitting brass end connections
for standard copper tubing.
•Motor can be replaced by removing one screw,
without disturbing the valve body or draining the
system.
•Complete powerhead may be removed or replaced
without breaking the line connections or draining the
system.
•All models can be installed without disassembling
the valve.
•Fits under the cover of most baseboards.
•Available with integral auxiliary end switch (V4044B;
V8043E,F; V8044E) to permit sequencing of auxiliary
equipment.
•V4043E and V8043J provide straight-through
control of steam.
V4043, V4044, V8043, V8044
Replacement Powerhead
V4043, V8043
V8043 Inverted Flare
V4044, V8044
Contents
APPLICATION ...............................................................................1
FEATURES .....................................................................................1
SPECIFICATIONS ........................................................................2
INSTALLATION ............................................................................9
OPERATION AND CHECKOUT ...............................................19
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES
60-2133—122
SPECIFICATIONS
Models:
V4043: line voltage, straight-through valves.
V4044: line voltage, 2-position diverting valves.
V8043: low voltage, straight-through valves.
V8044: low voltage, 2-position diverting valves.
See Table1.
a
Maximum five V8043 Zone Valves per 40 VA transformer.
Changeover Aquastat® Control: 120V, 3.0 A with 10.0 A
inrush.
End Switch: 120 V, 4.4 A running with 26.4 A inrush (60
Hz). Pilot duty 50 VA at 24 V.
Humidity Rating: 5-95% RH (non-condensing).
Atmosphere: non-corrosive, non-explosive.
Timing:
V4043 and V8043: Open or close in 15 seconds maximum.
V4044 and V8044: Divert flow in 30 seconds maximum.
Dimensions: See Fig.1.
Manual Opener: Manual opener (on all except the
straight-through, normally open valves) allows opening
the valve in case of power failure. Valve returns to
automatic position when power is restored.
Capacity Rating (nominal): (See Table1)
Straight-through models:
1.0 Cv (.86 kv)
3.5 Cv (3.0 kv) Standard
8.0 Cv (6.9 kv)
Diverting models:
4.0 Cv (3.5 kv) Standard
7.0 Cv (6.0 kv)
Additional Feature: End switch enclosure included.
Electrical Ratings
(See Table 1 for Voltage of Specific Models):
Voltage Amperes Voltage Amperes
24
0.320
a
220 0.042
100 0.087 240 0.040
120 0.080 277 0.037
208 0.044 ——
V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES
360-2133—12
Fig. 1. Mounting dimensions in in. (mm) of V4043/44, V8043/44 Motorized Valves.
AUTO
MAN OPEN
A B
AUTO
MAN OPEN
A B
AUTO
MAN OPEN
A
B
AUTO
MAN OPEN
A
AB
AB
B
HEIGHT NEEDED TO REMOVE COVER.
DIMENSIONS FOR 1/2 IN. COPPER TUBING.
DIMENSIONS FOR 3/4 IN COPPER TUBING.
DIMENSIONS FOR 1 IN. COPPER TUBING.
4-7/8 IN. (124) MAX ON V8034F WITH TERMINAL BOARD ENCLOSURE.
V4034B AND V8043B VALVES THAT ARE NORMALLY OPEN IN THE
DE-ENERGIZED POSITION HAVE NO MANUAL LEVER. THE VALVES
ALSO HAVE A REVERSED POWERHEAD WHERE THE LEADWIRES
EXIT THE POWERHEAD ABOVE THE B (OUTLET) PORT RATHER
THAN ABOVE THE A (INLET) PORT.
REFER TO MOUNTING INSTRUCTIONS.
OPENING FOR 1/2 IN. CONDUIT ON MANUAL LEVER SIDE FOR
V4043, V8043; OPENING ON OPPOSITE SIDE FOR V4044, V8044.
1
1
6
7
8
1
6
5
2
3
4
8
1
4 3 2
7
2
3
4
7
8
7
7
1
2
3
4
5
6
7
8
M10175
V4043, V8043 SWEAT COPPER CONNECTION MODELS
V4044, V8044 SWEAT COPPER CONNECTION MODELS
V4044, V8044 FLARE-FITTING MODELS
V4043, V8043 FLARE-FITTING MODELS
V8043 INVERTED FLARE MODELS
2-3/8
(60)
7/8 DIA.
(22)
7/8 DIA.
(22)
1-1/2
(38)
5-1/4
(133)
5-1/4
(133)
15/32
(12)
IN
OUT
INLET
OUT
3-1/2 (89)
1-3/4
(44)
3/8
(10)
3/8
(10)
3/8
(10)
1-3/4
(44)
1-9/16
(40)
1-3/4
(44)
3-1/8
(79)
3-1/2
(89)
1-7/8
(47)
3-11/16
(94)
1-9/16
(40)
3/8
(10)
1-3/4
(44)
3-1/8
(79)
3-1/2
(89)
1-7/8
(47)
3-11/16
(94)
2-3/8
(60)
5-1/4
(133)
1-3/4
(44)
1-3/4
(44)
1-7/8
(48)
1-11/16
(43)
1-1/2
(38)
2-3/8
(60)
1-3/4
(44)
1-3/4
(44)
3-1/8
(79)
2-1/4
(57)
7/8
(22)
3-1/8
(79)
3-1/2 (89)
1-3/4
(44)
1-3/4
(44)
2-11/32
(59)
2-11/32
(59)
2-11/32
(59)
2-11/32
(59)
1-13/16
(46)
3-5/8 (92)
15/32
(12)
2-3/8 (60)
1-1/2
(38)
5-1/4
(133)
OUT
IN
IN
INLET
Product specificaties
| Merk: | Honeywell |
| Categorie: | Niet gecategoriseerd |
| Model: | V8043E |
Heb je hulp nodig?
Als je hulp nodig hebt met Honeywell V8043E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden