Honeywell T4398B1003/U Handleiding

Honeywell Thermostaat T4398B1003/U

Lees hieronder de đź“– handleiding in het Nederlandse voor Honeywell T4398B1003/U (1 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 102 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
272804A
RANGE STOP AND COVER LOCKING
ASSEMBLY FOR HONEYWELL
ELECTRIC HEATING THERMOSTATS
For Models:
T498 (manufactured after November 1993),
T410, T4398, T4098
SECURITY FEATURES
Locking Cover, Figure 1
Remove cover by swinging
up from the bottom.
Insert Tinnerman Speed Nut
supplied into slot at upper and
lower rear of thermostat base.
Drive Allen screws into Speed Nuts
until head is flush with lower edge
of Thermostat base.
Re-install cover and lock by backing
out Allen screws until screw body
protrudes through cover hole.
To unlock cover, drive Allen screws
into thermostat base until screws
body clears cover.
®
Set thermostat to desired set point
Remove cover.
Install plastic dowels supplied into
minimum and/or maximum range
stop holes on inside back of cover.
Re-install cover. Check operation
of range stops.
1.
2.
3.
4.
5.
1.
2.
3.
Figure 1
Range Stops, Figure 2
Figure 2
MOD 08-97 Honeywell Ltd. 1994 Printed in Mexico Form No. 95C-10708-1


Product specificaties

Merk: Honeywell
Categorie: Thermostaat
Model: T4398B1003/U

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell T4398B1003/U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Honeywell

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat