Honeywell RCHT8600ZW1003/U Handleiding
Honeywell
Thermostaat
RCHT8600ZW1003/U
Bekijk gratis de handleiding van Honeywell RCHT8600ZW1003/U (60 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 49 mensen en kreeg gemiddeld 4.7 sterren uit 25 reviews. Heb je een vraag over Honeywell RCHT8600ZW1003/U of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/60
RCHT8600 Series Z-Wave
Programmable Thermostat
Quick Installation Guide
Tools you will need Tools you may need
Wire stripper
Needle-nose pliers Drill and drill bit
Included in your box
Small flat head scr
ewdriver
Phillips scr
ewdriver
Pencil
Level
Screws and
anchors
UWP™
Mounting
System
(UWP)
RCHT8600
Thermostat
Quick Install
Guide
2
Quick Installation Guide
Removing your old thermostat
2 Check that your system is off.
Change the temperature on your
old thermostat. If you don’t hear the
system turn on within 5 minutes, the
power is off.
Note: If you have a digital
thermostat that has a blank display,
skip this step
1 Turn power OFF.
To protect yourself and your
equipment, Turn off the power at the
breaker box or switch that controls
your heating/cooling system.
3 Remove the old thermostat’s
faceplate.
On most thermostats, you can take
off the faceplate by grasping and
gently pulling. Some thermostats
may have screws, buttons, or clasps.
Do not remove any wires from your
thermostat at this time!
75
OFF
OFF
ON
Breaker box
Switch
4 Make sure there are no 120/240V
wires.
Do you have thick black wires with
wire nuts?
Is your thermostat 120V or higher?
If you answered yes to either of
these questions, you have a line
voltage system and the thermostat
will not work.
If you are unsure visit:
honeywellhome.com/support
Wire nut
Thick black wire
3
RCHT8600 Series
5 Take a picture of how your wiring
looks right now.
Be sure to include the letters
next to the terminals where the
wires are inserted. This will be a
helpful reference when wiring your
thermostat.
Tip: If the color of your wires has
faded or if 2 terminals have the
same wire color, use the wire labels
provided in the package to label
each wire.
6 Record if you have wires in the following terminals.
Do not include jumpers as a part of your count. The thermostat does not
need jumpers.
Terminal Wire Color
R
Rh
Rc
7 Write down the color of the wires.
Check mark the wires that are connected to terminals. Next to the check mark,
write down the color of the wire. Do not include jumpers as a part of your
count.
Check all that apply (Not all will apply):
Terminal Wire Color
Y
Y2
G
C
Terminal Wire Color
A or L/A
O/B
W2 or AUX
E
W
K
The RCHT8600 thermostat does not support U terminals.
If there are wires in terminals that are not listed, you will need additional
wiring support. Visit honeywellhome.com/support to find out if the thermostat
will work for you.
Product specificaties
| Merk: | Honeywell |
| Categorie: | Thermostaat |
| Model: | RCHT8600ZW1003/U |
Heb je hulp nodig?
Als je hulp nodig hebt met Honeywell RCHT8600ZW1003/U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Thermostaat Honeywell
4 Juli 2025
4 Juli 2025
9 Juni 2025
10 Juni 2024
27 Februari 2024
2 September 2023
9 Juli 2023
7 Juli 2023
7 Juli 2023
6 Juli 2023
Handleiding Thermostaat
- Delta Dore
- PECO
- Energenie
- Grasslin
- AVM
- GE
- Buderus
- Boneco
- Basetech
- Crestron
- Emerson
- H-Tronic
- Netatmo
- Truma
- Daikin
Nieuwste handleidingen voor Thermostaat
31 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025