Honeywell Chage-Only Base COB02 Handleiding
Honeywell
Barcode lezer
Chage-Only Base COB02
Bekijk gratis de handleiding van Honeywell Chage-Only Base COB02 (9 pagina’s), behorend tot de categorie Barcode lezer . Deze gids werd als nuttig beoordeeld door 97 mensen en kreeg gemiddeld 4.4 sterren uit 49 reviews. Heb je een vraag over Honeywell Chage-Only Base COB02 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/9
Charge-Only Base
COB02
Installation Guide
Rev B
9/15
Introduction
Honeywell’s Charge-Only Base can fully charge an industrial
wireless area-imaging scanner in 5 hours, maximizing uptime in any
application.
Note: When a scanner is placed into the Charge-Only Base, the
battery will charge. Please note that the Charge-Only Base
will not facilitate communication with the host system or other
scanners.
Installation
Connect the power adapter to the Charge-Only Base, then plug the
power supply into an AC power outlet. Make sure the AC power
outlet voltage is the same as the power supply.
Use only a Listed Limited Power Source (LPS) or Class 2 type
power supply with output rated 5 to 5.2Vdc, 1A. We recommend
use of Honeywell power adapters. Use of any non-Honeywell
power adapters may cause damage not covered by the
warranty.
Mounting a COB02 Base
The COB02 Base can be mounted on either a horizontal or vertical
surface. The cable can be routed through either the top or the bottom
of the base.
The cable can be routed down through the bottom of the base,
securing the cable in the wireway.
The cable can also be routed up through the top of the base, but must
be crossed over and secured in the wireway.
When routing the cable up through the top of the base, be sure to
cross the cable over before placing in the wireway. If not, too much
strain is placed on the cable connector.
Product specificaties
| Merk: | Honeywell |
| Categorie: | Barcode lezer |
| Model: | Chage-Only Base COB02 |
Heb je hulp nodig?
Als je hulp nodig hebt met Honeywell Chage-Only Base COB02 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Barcode lezer Honeywell
25 Februari 2025
16 November 2024
16 November 2024
13 December 2023
13 December 2023
13 December 2023
4 Juni 2023
1 Juni 2023
30 Mei 2023
Handleiding Barcode lezer
- Manhattan
- Baracoda
- IC Intracom
- Wasp
- DeLock
- Digitus
- Steren
- Cognex
- IFM
- Metapace
- CipherLab
- Atlantis Land
- Zebra
- Opticon
- Mach Power
Nieuwste handleidingen voor Barcode lezer
15 Juni 2025
11 Juni 2025
11 Mei 2025
31 Maart 2025
31 Maart 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
20 Februari 2025
20 Februari 2025