Home Easy HE-303 Handleiding

Home Easy Niet gecategoriseerd HE-303

Lees hieronder de 📖 handleiding in het Nederlandse voor Home Easy HE-303 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
RE-INVENTING THE HOME
HOME
easy
HE-303 Remote
control Indoor PIR
V1.0
Installation:
The HE-303 Indoor PIR adds extra security and ease of
use to your Home Easy products
  -Selectable timer setting
  -Selectable Detection Range
  -Veriable Light setting
  -25 Metre Wire Free Range
  -Battery Powered 2*AAA
The HE-303 allows you to control your
HomeEasy Receiver sockets or modules via a wire free
PIR sensor. When the PIR beam is broken the indoor PIR will switch
on your Remote control sockets or modules for between
5 seconds to 10 minutes, Ideal for controlling house hold lighting.
Compatible with all Home Easy products.
The HomeEasy Indoor PIR can be placed in any location, even in bathrooms.
Only use the adhesive strip on suitable surfaces.
Avoid placing the PIR in direct sunshine, above direct heat sources or on
metallic surfaces.
Detection Area
Detection Range:
The Indoor PIR has 3 selectable detection ranges: 1, 3 or 6 Metres.
To alter the detection range, remove the front cover and move the slide switch
to the required setting.
3. Replace the two front covers.
2. The base unit can be attached to the wall using either the adhesive strips or
screws (Included).
1. Using a small screwdriver remove the front cover and base plate.
Deleting Remote Control:
To delete the PIR from the memory of a HomeEasy receiver socket or module
control , simply press the "Learn" button. The LED will start to blink; slide the
"LEARN" switch to "DEL",, the LED will blink twice to confirm that the remote
control has been removed from the receiver sockets memory.
Pairing/Deleting with Remote Control:
Example
Up to Six remote control units can be paired with each
HomeEasy Receiver socket or module, to pair the indoor
PIR with a receiver unit, remove the front cover and,
slide the switch to DEL.
Now press the "Learn" button, the LED will start to flash, then slide the
"LEARN" switch to "SET", the units are now paired together.
Detection Angle:
The PIR detection area is 65 degrees, this can be reduced using the clip-on
covers (included). if required the covers can be cut to size.
if required the covers can be cut to size.
1.0
1 2 3 4 5 6 7 8
6M 6M 6M
3M 3M 3M
1M 1M 1M
6M 6M 6M
3M 3M 3M
1M 1M 1M
1.5
1 2 3 4 5 6 7 8
Detection Distance (Metres)
Height (PIR)
C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 57701
Web: www.chbyron.com
E-mail:
support@chbyron.com
Contact:   Helpline: 0845 2301 231
RF Range: The radio signals operating distance is reduced when the signal
has to pass through walls. The radio signals achieve a range of 25m; this can
be reduced depending on the type of material.
TIMBERMETAL GLASS
PLASTICS
10 - 15%
BRICK
10 - 40%
CONCRETE
40- 80%
10 - 40%
90% 5 - 15%
Range
Reduction Guide:
Help Section :
Day/Night Setting:
The PIR can operate one of three setting depending upon the ambient light
Level, to alter the light setting remove the front cover and use the slide switch
to select the setting.
PIR will operate 24Hrs a day
PIR will operate between 4pm to 6am
PIR will operate between 6pm to 6am
Times are approximations only
Changing Batteries:
1. Unclip the front cover from the front of the PIR
using a small screw driver.
2. Remove the batteries and replace using 2
new 'AAA' batteries, making sure the polarity
is correct.
Always dispose of old batteries in a
environmentally responsible way
3. Replace the frontcover making sure the clips are correctly aligned and
firmly push the case together.
No Activation:   Check the battery level and polarity, replace with new
     batteries if necessary
Receiver Stays:   The PIR may be suffering from false activation, try
ON Continuously  adjusting the position and detection angle.
1Min
Setting Timer :
The HomeEasy indoor PIR will switch on the
receiver socket or module for a predefined
period of time; this can be set between 5seconds
and10 minutes.
To select the time period, remove the front cover
and slide the switch to the required timer
setting.
5Sec 510min
Product Specification:
Remote Control: HE-303
Battery: 2 * AAA
Range: 25Metres (Open Distance)
Frequency: 433.92MHz
Warning: Never Exceed the
Product Specification

Product specificaties

Merk: Home Easy
Categorie: Niet gecategoriseerd
Model: HE-303

Heb je hulp nodig?

Als je hulp nodig hebt met Home Easy HE-303 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Home Easy

Home Easy

Home Easy HE-209 Handleiding

21 April 2023
Home Easy

Home Easy HE-210 Handleiding

21 April 2023
Home Easy

Home Easy HE-300 Handleiding

21 April 2023
Home Easy

Home Easy HE-204 Handleiding

21 April 2023
Home Easy

Home Easy HE-100 Handleiding

21 April 2023
Home Easy

Home Easy HE-301 Handleiding

21 April 2023
Home Easy

Home Easy HE-307 Handleiding

4 April 2023
Home Easy

Home Easy HE-203 Handleiding

24 Maart 2023
Home Easy

Home Easy HE-220 Handleiding

16 Maart 2023
Home Easy

Home Easy HE-302 Handleiding

13 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024