Home Easy HE-205 Handleiding
Home Easy
Niet gecategoriseerd
HE-205
Bekijk gratis de handleiding van Home Easy HE-205 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 42 mensen en kreeg gemiddeld 4.7 sterren uit 21.5 reviews. Heb je een vraag over Home Easy HE-205 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
Learn
RE-INVENTING THE HOME
HOME
easy
HE-205
Remote Bulb Holder
V1.0
The HE-205 Remote Bulb Holder converts your
standard ceiling rose or lamp into a wire free
unit.
- Never exceed the product specification
100W Max (Incandescent)
- Range 30 Metres
- Indoor Use Only
C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail:
support@chbyron.com
Contact: Helpline: 0845 2301 231
Product Specification:
Receiver Module: HE-205
Input:230V ~50Hz
Range: 30 Metres (Open Distance)
Max Load: 100W (Incandescent)
Frequency: 433.92MHz
Indoor Use Only
Warning: Never Exceed the Product Specification
Up to Six remote controls can be paired with each Bulb holder. To program
the bulb holder insert the unit into a compatible ceiling rose or lamp and
switch on the power, now press "Learn" button. The LED will start to flash,
now press the selected "ON" button on the remote control (additional
product), the LED will stop flashing. The units are now paired together, you
can test this by pressing the selected "On/Off" button.
Always refer to the original instruction when using with additional products.
Pairing/Deleting with Remote Control:
Deleting Remote Control:
To delete a remote control that has been paired with a HE-205 Bulb Holder,
simply press "Learn" button. The LED will start to blink; press the "Off" button
on the remote control, the LED will blink twice to confirm that the remote
control has been removed from the Bulb Holders memory.
Remote Socket reset:
To delete all the remote control units from the memory of the Bulb Holder,
hold the "Learn" button for more than 6 seconds, the LED will start to blink
continuously. Press and hold the learn button again, the LED will blink twice to
confirm that all paired remote controls are deleted form the receiver memory.
Dimming Receiver Sockets :
1. Using a paired remote control, Press the "On" button and press "On" again.
The unit will start the dimming cycle.
Never exceed 100W maximum load.
2. To set the receiver socket at the required level, press the "On" Button.
press "Off" to switch the receiver off.
Product specificaties
| Merk: | Home Easy |
| Categorie: | Niet gecategoriseerd |
| Model: | HE-205 |
Heb je hulp nodig?
Als je hulp nodig hebt met Home Easy HE-205 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Home Easy
21 April 2023
21 April 2023
21 April 2023
21 April 2023
21 April 2023
21 April 2023
4 April 2023
24 Maart 2023
16 Maart 2023
13 Maart 2023
Handleiding Niet gecategoriseerd
- Maxxmee
- Elac
- PUR
- AirExchange
- Raspberry Pi
- Silent Knight
- Auto XS
- James
- Flemoon
- Car Keys Express
- Club 3D
- Belena
- Brockhaus HEUER
- Rug Doctor
- Palmako
Nieuwste handleidingen voor Niet gecategoriseerd
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025