Hikvision HF-Link HF-PG1 Handleiding
Pagina's 2 Rookmelder
Bekijk de handleiding van Hikvision HF-Link HF-PG1 gratis online of download de PDF. 4 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
1. Scan the QR code below to install the APP.
Device Adding & Wi-Fi Connection
Indicator Definition
Wi-Fi Connection
Alarm
Fault
Pairing
Hik-Protect
2. In the APP, click "+" icon to scan the QR code on the device.
3. Follow APP guide to add gateway. Device name and room can be cusomized.
4. Enable Pairing Mode
After gateway is added, it will automatically enter pairing mode, with blue light
flashes slowly. If the blue light is not flashing, manually enable pairing mode as
follows.
*Ensure gateway is powered and phone Wi-Fi is on before setup.
5. Follow APP guide and connect your phone to device hotspot.
6. Follow App guide and connect the device to Wi-Fi.
*Gateway gives voice prompts during setup.
Press for 3s
A Beep
Flash
B
Hangzhou Hikvision Digital Technology Co., Ltd
Wireless Gateway
UD45151B-B
Appearance
Sound Hole
Pack List
*All device's appearances are subject to the one you bought.
Gateway
Indicator & Speaker
Operation Status
Indicator
Blue, red, yellow and green lights
flash once resppectively
1 quick beep
Speaker
Red light is always on
Beep (customized)
Alarm
Yellow light is always on
Beep every 50s
Fault
Blue light flashes slowly
1 quick beep
Connecting to Wi-Fi
Off
Blue light is always on
Connecting to Wi-Fi
Succeeded
Off
Off
Connecting to Wi-Fi
Failed
Mode
Power On
Off
Blue light is always on
Standby
USB Cable
User Manual
90mm
90mm
90mm
90mm90mm
15mm
15mm
15mm
15mm15mm
90mm
90mm
90mm
90mm
90mm
Product Information
User Manual
Networking Testing
After detector is paired with the gateway, you need a testing to ensure its
normal operation. Open the APP, enter "Device Setting" page, and click
"Networking Testing". The test results will be displayed after completion.
Add Detector
After detector is paired with the gateway, you can receive push notifications
at any time, stay updated on detector's status, and remotely operate via your
phone.
Prerequisite: Before adding the detector, ensure that a compatible gateway
has been added and is online.
1. In the APP, click "+" icon.
2. Follow APP guide to manually add detector. You can customized device
name, interconnected gateway and room.
3.Follow APP guide to power on detector, enter pairing mode, and etc. When
green light flashes quickly for 2 sec and stays on, and speaker emits 2 quick
beeps, the detector is paired. Gateway gives voice prompts during setup.
*
When pairing, all devices need to be operated within 3 meters. Up to 30
detectors can be added to a gateway.
The pairing time is 90 sec. If it times out or pairing failes, repeat the operation.
Address: No.555, Qianmo Road, Binjiang District, Hangzhou 310052, China
Tel: 0086 400-800-5998
Gateway Setting
Open the App and enter "Device Setting" page to perform more operations,
such as editing device information, editing time zone, rebooting device and
upgrading.
Edit Device Information
Edit Time Zone
Upgrade Device
Upgrade Sensor and Peripheral
*Performing operations above on detectors is also supported on the APP.
Green light flashes slowly
3 quick beeps
2 quick beeps
Green light flashes quickly for 2s
Red light flashes quickly for 2s
A long beep for 2s
Start Pairing
Pairing Succeeded
Pairing Failed
Green light flashes quickly for 2s
2 quick beeps
Restore Factory Settings
Off
Off
(except for alarms)
Night Mode
Red light is always on until
alarm is cleared
Off
Silence
Product specificaties
| Merk: | Hikvision |
| Categorie: | Rookmelder |
| Model: | HF-Link HF-PG1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Hikvision HF-Link HF-PG1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Rookmelder Hikvision
Hikvision HF-S2 Handleiding Hikvision HF-CS1 Handleiding Hikvision HF-CSS1 Handleiding Hikvision HF-CMP1 Handleiding Hikvision Independent NP-FY200 Handleiding Hikvision HikFire HF-CH1 Handleiding
Alle Hikvision Rookmelder handleidingen