Haws 1920W Handleiding
Pagina's 13 Niet gecategoriseerd
Bekijk de handleiding van Haws 1920W gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
12/24 Model 1920/1920HPS/1920W Page 1 of 13
1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424
E-mail:
[email protected]www.hawsco.comwebsite:
No. 0510000490 (13)
Model 1920/1920HPS/1920W
Bottle Filler
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that all of its products are guaranteed against defective material or poor workmanship for
a period ofThe foregoing notwithstanding, warrants certain one year from the date of shipment. HAWS
specific products or components thereof for an adjusted period. A list of these excepted products and
components and a description of their respective warranty terms may be found here:
www.hawsco.com/warranty. ’ liability under this warranty shall be discharged by furnishing without HAWS
charge F.O.B. factory any goods, or part thereof, which shall appear to the Company upon HAWS
inspection to be of defective material or not of first-class workmanship, provided that a claim is made in
writing to Company within a reasonable period after receipt of the product. Where claims for defects are
made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. shall HAWS
not be liable for the cost of repairs, alterations or replacements, or the labor required to implement them,
or for any expense connected therewith made by the owner or owner’s agents, except upon written
authority from . HAWSHAWSshall not be liable for any damages caused by defective materials or poor
workmanship, except for replacements, as provided above. Buyer agrees that has made no other HAWS
warranties either express or implied in addition to those above stated, except that of title with respect to
any of the products or equipment sold hereunder and that shall not be liable for general, special, HAWS
incidental, or consequential damages claimed to arise under the contract of sale.
Equipment manufactured by HAWS is warranted to function if installation and maintenance instructions
provided are adhered to. The units also must be used for the purpose for which they were intended. Any
HAWS emergency equipment is intended to supplement first-aid treatment. Due to widely varying
conditions, HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury
or the aggravation of existing or prior injuries.
EXCEPT AS EXPRESSLY STATED HEREIN, HAWS HEREBY DISCLAIMS ALL WARRANTIES,
WHETHER EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED WITHOUT THE
WRITTEN CONSENT OF HAWS. REMEDIES AND REPLACEMENTS STATED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL HAWS BE LIABLE FOR ANY SPECIAL, PUNITIVE,
CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON INCLUDING BUT NOT LIMITED
TO DAMAGES FOR LOSS OF USE OR PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY
DAMAGE, OR OTHER MONETARY LOSS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
12/24 Model 1920/1920HPS/1920W Page 2 of 13
REQUIRED TOOLS: Tubing cutter, 3/32” and 5/32” hex key set, adjustable wrench or
socket.
LOCATION OF UNIT: The Model 1920/1920HPS/1920W bottle filler water dispenser can be
installed in various applications. Possible installations include indoor over an existing drinking
fountain, outdoor over an existing fountain, or a standalone wall-mounted bottle filler. When
installing this unit, local, state or federal codes should be adhered to.
SUPPLY LINE: The minimum recommended line size is 3/8"O.D. copper or plastic tubing
with 30-90 psi (2-6 ATM) pressure. Where sediment or mineral content is a problem, an inlet
filter is recommended.
PLUMBING CONNECTIONS: Inlet is 3/8“O.D. push-in type fitting.
MAINTENANCE: Periodically clean the strainer (located inside push button valve). Refer to
5874 Series Valve Manual for more information.
INSTALLATION PROCEDURE
GENERAL NOTES:
1. For all plastic push-in type fitting connections, only connect NSF-61 copper or
plastic tubing. Stainless steel or glass tubing is not recommended. The
following assembly instructions must be followed to ensure a watertight
connection:
a. Cut tubing square and clean.
b. Mark from end of tube the length of insertion (See table below).
c. Push tube into the fitting until it bottoms out.
d. To remove, depress collet and pull tubing out.
Tube Sizes
O.D.
Tolerance
Insertion Depth
3/8” ±.005” 3/4”
CLEANING INSTRUCTIONS FOR HI-POLISHED STAINLESS PRODUCTS:
Haws’ recommended cleaning procedure for hi-polished stainless products is as follows:
Use a mild detergent or soap and water for removing stains and fingerprints or use a clean cloth
with window cleaner.
BOTTLE FILLER BRACKET:
If installing the bottle filler in new construction, it is recommended to use Model 6700 Mounting
Plate. Follow the installation instructions supplied with the 6700 for mounting dimensions.
Reference Pages 6-10 of this document for 1920/1920HPS/1920W button heights when
mounted over different Haws drinking fountains. (Note: Mounting Hardware is only supplied with
the 6700 Series Mounting Plates and not the Bottle Filler Water Dispensers).
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297
12/24 Model 1920/1920HPS/1920W Page 3 of 13
If installing as a retrofit in old construction, it is recommended to use the Model 6700 Mounting
Plate behind the finished wall. If that is not possible, it is recommended to install wood stud
cross-braces behind the wall and mount the 1920/1920HPS/1920W directly to the wood
support. If that is not possible, Model 6700R Retrofit Plate may be used. Follow the installation
instructions supplied with the 6700R. (Note: Mounting Hardware is only supplied with the 6700
Series Mounting Plates and not the Bottle Filler Water Dispensers).
If installing as a stand-alone bottle filler, use the mounting hole location diagram on Page 5 and
bolt the 1920/1920HPS/1920W securely to the wall. (Note: Mounting Hardware is not supplied
with the Bottle Filler Water Dispensers).
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1. Insufficient water flow. 1a. Check that any inlet screwdriver stop valve (not
supplied
)
is wide open.
Turn counter
clockwise.
b. Verify minimum 30 psi flowing supply pressure.
c.
Clean strainer. See 5874
Series
Valve Manual.
d.
e.
Adjust valve to increase flow. Use front adjust
screw or see 5874 Series Valve Manual.
Make sure nozzle is free of debris.
2. Excessive water flow. 2a. Adjust valve to decrease flow. Use front adjust
screw or see 5874 Series Valve Manual.
3. Water flow is crooked or
splatters.
3a.
b.
c.
Make sure nozzle is free of debris.
Verify that bottle filler is installed level and
straight.
Adjust valve to decrease flow. Use front adjust
screw or see 5874 Series Valve Manual.
For more information about Haws products, see our website:
www.hawsco.com
© 2024 Haws
®
Corporation – All Rights Reserved
HAWS
®
and other trademarks used
in these materials are the exclusive property of Haws Corporation.
Product specificaties
| Merk: | Haws |
| Categorie: | Niet gecategoriseerd |
| Model: | 1920W |
Heb je hulp nodig?
Als je hulp nodig hebt met Haws 1920W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden