Hanwha SDC-9442DC Handleiding
Hanwha
Bewakingscamera
SDC-9442DC
Bekijk gratis de handleiding van Hanwha SDC-9442DC (33 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 47 mensen en kreeg gemiddeld 4.4 sterren uit 24 reviews. Heb je een vraag over Hanwha SDC-9442DC of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/33
1080P Camera
User Manual SDC-9442DC
CAUTION : Changes or modifications not expressly approved by the part responsible for compliance could void
the user's authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
2_ English
PACKAGE CONTENTS
SDC-9442DC Plastic Achors / Screws User Manual Camera Cable (60ft)
PART NAMES
Name Description
Illumination Sensor Detects incoming light to control the IR LED.
bIR LED These infrared LED's are controlled by the illumination sensor.
cLens Focal length of 4mm enables you to cover relatively longer range of monitoring.
BNC Cable BNC terminal for video signal output.
Power Cable Used to plug the power cable.
b
c
English _3
English
Precautions before installation
Ensure you read out the following instructions before installing the camera:
•It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the
camera including the installation bracket.
•Stuck-in or peeled-off cables can cause damage to the product or a fire.
•For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
INSTALLATION
Disassembling
Insert a straight screwdriver into the slot and turn 45 degree to separate the bottom case and
fixed cover, as shown in the following picture. The width of the screwdriver is 3-6mm.
Turn 45 degree
Slot
Product specificaties
| Merk: | Hanwha |
| Categorie: | Bewakingscamera |
| Model: | SDC-9442DC |
Heb je hulp nodig?
Als je hulp nodig hebt met Hanwha SDC-9442DC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bewakingscamera Hanwha
6 Mei 2025
16 April 2025
2 April 2025
2 April 2025
30 Maart 2025
30 Maart 2025
30 Maart 2025
21 Maart 2025
20 Maart 2025
20 Maart 2025
Handleiding Bewakingscamera
- Thomson
- Guardzilla
- Epcom
- Foscam
- Elmo
- Comtrend
- IMILAB
- Syscom
- Reolink
- Vitek
- Tesla
- Airlive
- SPC
- Axis
- Caddx
Nieuwste handleidingen voor Bewakingscamera
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025