Hansgrohe Metropol Classic 31303007 Handleiding

Hansgrohe Niet gecategoriseerd Metropol Classic 31303007

Bekijk gratis de handleiding van Hansgrohe Metropol Classic 31303007 (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.0 sterren uit 2 reviews. Heb je een vraag over Hansgrohe Metropol Classic 31303007 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/16
ZH 用户手册/组装说明 2
EN Instructions for use / assembly instructions 3
Metropol Classic
31300007 / 31300097
Metropol Classic
31302007 / 31302097
31303007 / 31303097
Metris Classic
31075007
Metris Classic
31078007
Talis Classic
Talis Classic
14116007
Metris 100
请勿使用含有乙酸的硅胶!
安全技巧
装配时为避免挤压和切割受伤,必须戴上手
套。
本产品只允许作为洗浴、卫生和洁身之用。
冷热水管间过大的压力差必须予以平衡。
安装提示
安装前必须检查产品是否受到运输损害。安装
后将不认可运输损害或表面损伤。
管道和阀门必须根据通用标准进行安装、冲洗
和检查。
请遵守当地国家现行的安装规定。
只能按规定使用溢流阀。禁止将半露柱及其他部
件固定到溢流阀上。
如果使用即热式热水器时出现问题,或要求更大
的水流量,可以把位于水波器后面的EcoSmart
®
(流量限制器)拆除。
技术参数
本龙头配有EcoSmart
®
(流量限制器)
工作压强: 最大1MPa
推荐工作压强: 0,1 - 0,5 MPa
测试压强: 1,6 MPa
(1 = bar = PSIMPa 10 147 )
热水温度: 最大70°C
推荐热水温度: 65°C
热力消毒: 最大70°C 4/ 分钟
该产品专为饮用水设计!
中文
清洗(参见第页 )10
操作(参见第页 )12
汉斯格雅建议,清晨或在水流长时间停
滞后,前半升水不作饮用水使用。
备用零件(参见第页 )13
XXX = 颜色代码
000=镀铬
090=镀铬/黑色
990=金色
安装(参见第页 )
大小(参见第页 )
调节(参见第页 )
热水温度调节。如果使用即热式喷头,
则不建议安装热水阀门。
选装附件(不在供货范围内)
水管胶泥(参见第页 )
符号说明
流量示意图(参见第页 )
带有EcoSmart
®
无EcoSmart
®
专用工具# (参见第页 )58085000
2
Do not use silicone containing acetic acid!
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
The plumbing codes applicable in the respective
countries must be observed.
The drain valve must only be used as intended. It is not
allowed to attach other objects to the drain valve, for
example a semi-pedestal.
If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
Technical Data
This mixer series-produced with EcoSmart
®
(flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
The product is exclusively designed for drinking water!
Cleaning (see page )10
Operation (see page )12
Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a prolonged
period of non-use.
Spare parts (see page )13
000 = chrome plated
090 = chrome plated/gold plated
990 = gold plated
Assembly (see page )
Dimensions (see page )
Adjustment (see page )
To adjust the hot water limiter. Using a
hot water limiter in combination with
a continuous flow water heater is not
recommended.
Special accessories
(order as an extra)
Installation putty (see page )
Symbol description
Flow diagram (see page )
with EcoSmart
®
without EcoSmart
®
special tool #58085000 (see page )
3


Product specificaties

Merk: Hansgrohe
Categorie: Niet gecategoriseerd
Model: Metropol Classic 31303007

Heb je hulp nodig?

Als je hulp nodig hebt met Hansgrohe Metropol Classic 31303007 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden