Hansgrohe Ecos 14090007 Handleiding


Bekijk gratis de handleiding van Hansgrohe Ecos 14090007 (12 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.8 sterren uit 1.5 reviews. Heb je een vraag over Hansgrohe Ecos 14090007 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/12
ZH 用户手册/组装说明 2
EN Instructions for use / assembly instructions 3
Ecos
14090007
Logis E
71163007
2
安全技巧
套。
冷热水管间过大的压力差必须予以平衡。
安装提示
安装前必须检查产品是否受到运输损害。安装
后将不认可运输损害或表面损伤。
管道和阀门必须根据通用标准进行安装、冲洗
和检查。
请遵守当地国家现行的安装规定。
只能按规定使用溢流阀。禁止将半露柱及其他部
件固定到溢流阀上。
如果使用即热式热水器时出现问题,或要求更大
的水流量,可以把位于水波器后面的EcoSmart
®
(流量限制器)拆除。
技术参数
本龙头配有EcoSmart
®
(流量限制器))
工作压强: 最大1 MPa
推荐工作压强: , - , 0 1 0 5 MPa
测试压强: , 1 6 MPa
( = = )1 MPa 10 bar 147 PSI
热水温度: 最大70°C
推荐热水温度: 65°C
热力消毒: 最大70°C 4/ 分钟
该产品专为饮用水设计!
中文
清洗(参见第页 )10
操作(参见第页 )12
汉斯格雅建议,清晨或在水流长时间停
滞后,前半升水不作饮用水使用。
备用零件(参见第页 )
安装参见第页
大小(参见第页 )
请勿使用含有乙酸的硅胶!
符号说明
流量示意图
(参见第页 )
带有EcoSmart
®
无EcoSmart
®
选装附件(不在供货范围内)
专用工具# (参见第页 )58085000
水管胶泥(参见第页 )
3
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
sures.
Installation Instructions
Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
The plumbing codes applicable in the respective
countries must be observed.
The drain valve must only be used as intended. It is not
allowed to attach other objects to the drain valve, for
example a semi-pedestal.
If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
®
(flow limiter) located behind the aerator can be
removed.
Technical Data
This mixer series-produced with EcoSmart
®
(flow
limiter))
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C / 4 min
The product is exclusively designed for drinking water!
English
Cleaning (see page )10
Operation (see page )12
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Spare parts (see page )
Assembly see page
Dimensions (see page )
Do not use silicone containing acetic acid!
Symbol description
Flow diagram
(see page )
with EcoSmart
®
without EcoSmart
®
Special accessories (order as an
extra)
special tool #58085000 (see page )
Installation putty (see page )


Product specificaties

Merk: Hansgrohe
Categorie: Niet gecategoriseerd
Model: Ecos 14090007

Heb je hulp nodig?

Als je hulp nodig hebt met Hansgrohe Ecos 14090007 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden