Haier YD1301 Handleiding
Haier
Strijkijzer
YD1301
Bekijk gratis de handleiding van Haier YD1301 (2 pagina’s), behorend tot de categorie Strijkijzer. Deze gids werd als nuttig beoordeeld door 29 mensen en kreeg gemiddeld 5.0 sterren uit 15 reviews. Heb je een vraag over Haier YD1301 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
RT• •Sensor
E
EH
RT
MT
E
N
L
Di y lspla pane
Relay Relay
ES15V-ED(H) ES25V-ED(H)
0040503911
ES15V-ED(H)
ES25V-ED(H)
ES15V-ED(H)
ES25V-ED(H)
31 50
6868
2.3 5.4
Ｅｌｅｃｔｒｉｃ Ｃｉｒｃｕｉｔ Ｄｉａｇｒａｍ
４８８ｍｍ
５２６ｍｍ
152mm
Please use this Template to drill 2 holes(
ø12mm,Deep 65mm)
for mounting the water heater.
Switch on the power supply of water heater, screen will display full digits for 1 second, then goes into
Standby status(No display on screen) or the previous working status before power cut.
Press button to start the water heater. Default setting is Winter mode and the light “W” will be lit.
The screen will show the setting temperature of 75 degree for 6 seconds, after that shows the current
temperature of water.
After water heater started, the working mode can be changed between Winter and Summer by pressing
button.
When the working mode is changing from Winter to Summer, the light “S” will be lit and the light “W” goes
off, screen will display 50 degree which is the setting temperature of summer mode for 6 seconds, after that
shows the current water temperature.
When the working mode is changing from Summer to Winter, the light “W” will be lit and the light “S” goes
off, screen will display 75 degree which is the setting temperature of summer mode for 6 seconds, after that
shows the current water temperature.
Note: If current water temperature is above the setting temperature, then water heater will get into heat
maintaining mode, “HEATING” light is off; When current water temperature is lower than the setting
temperature, then water heater will get into heating mode, the “HEATING” light will be on till the setting
temperature reached.
Switch off the water heater by pressing button after using.
Summer Winter
ES15V-ED(H)
ES25V-ED(H)
HEATING
S rumme Winter
W
Power
Power
Power
Show the current
water temperature
after 6 seconds
Summer Winter
Press
HEATING
Summe r Winter
W
Power
HEATING
Summer Wi ten r
W
Power
SHEATING
Summer Wi ten r
Power
Show the current
water temperature
after 6 seconds
HEATING
Summer Wi ten r
SS
Summer Winter
Press
HEA INT G
Summer Wi ten r
W
Power
HEATING
Summe r Winter
PowerPower
two
Product specificaties
| Merk: | Haier |
| Categorie: | Strijkijzer |
| Model: | YD1301 |
Heb je hulp nodig?
Als je hulp nodig hebt met Haier YD1301 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Strijkijzer Haier
26 Juni 2023
21 Juni 2023
21 Juni 2023
20 Juni 2023
20 Juni 2023
17 Juni 2023
17 Juni 2023
16 Juni 2023
15 Juni 2023
15 Juni 2023
Handleiding Strijkijzer
- Point
- Hitachi
- Russell Hobbs
- Polti
- Mellerware
- Panasonic
- Tower
- Duronic
- Turmix
- Easy Home
- Arcelik
- Tesla
- Orava
- Jata
- Vaporella
Nieuwste handleidingen voor Strijkijzer
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
11 Juni 2025
10 Juni 2025
9 Juni 2025
4 Juni 2025
30 Mei 2025
30 Mei 2025