Guardian G1562 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Guardian G1562 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 3.5 gebruikers gemiddeld met 4.3 sterren beoordeeld

Pagina 1/2
Operation & Maintenance Guide
G1562 Pressurized 15 Gallon Portable Eyewash with Drench Hose
G1561 Pressurized 15 Gallon Portable Eyewash
1
Guardian Equipment 312 447 8100 TELEPHONE
1140 N North Branch St 312 447 8101 FACSIMILE
Chicago, IL 60642 gesafety.com
Item Part Number Description
A
AP400-017R
Upper Eyewash Assembly With Fill
Tube (Drench Hose And Clamp Sold
Seperately)
B
BI366-1-125
Pressure Regulator
C
400-017-3R
Pressure Relief Valve
D
400-004-2
Pressure Gauge
E
400-017-5R
Tank Gasket (Pkg of 6)
F
AP400-017-4R
Clamp, Bolts, Clips and Tank Gasket
G
AP400-017-2
Fill Tube
H
AP470-001A
GS-Plus™ Spray Head Assembly
I
G1540BA-R
Bacteriostatic Additive (Case of 4)
J
AP600-101V
1/2" IPS Stay-Open Ball Valve Assembly
K
G5010T2
Drench Hose Attachment Assembly
L
RK600-240
Drench Hose Valve Repair Kit
K
L
E
D
J
General Notes
The G1562 pressurized portable self-contained eyewash
is designed to supply 0.65 GPM of water for 15 minutes in
environments where a permanent water supply may not
be available. Note that, under ANSI Z358.1-2014, drench hose
units supplement, but do not replace other types of emergency
equipment.
Unit should be placed in a location where the ushing uid
ow pattern is not less than 33 inches and no greater than
53" inches above the surface on which the user stands. It
shall also be positioned so that there are no obstructions on
either side of the unit. Unit should be located on a surface
which is at, dry and out of direct sunlight.
USE OF THIS UNIT FOR ANY OTHER PURPOSE NOT INTENDED
BY THE MANUFACTURER WILL VOID THE WARRANTY.
Safety and Maintenance Instructions
Read and follow all instructions for this eyewash station.
Failure to do so may result in serious eye damage and vision
loss.
Pressure relief valve should be checked to make sure it is
working properly.
It is recommended that the eyewash be inspected weekly
for inadequate water level. Inspections which give evidence
of any particulation or discoloration suggest the water be
replaced immediately.
Rev. 030320 / © Guardian Equipment
Operation & Maintenance Guide
G1562 Pressurized 15 Gallon Portable Eyewash with Drench Hose
G1561 Pressurized 15 Gallon Portable Eyewash
2
Guardian Equipment 312 447 8100 TELEPHONE
1140 N North Branch St 312 447 8101 FACSIMILE
Chicago, IL 60642 gesafety.com
Assembly and Filling Instructions
1. IMPORTANT: Depressurize tank by activating pressure
relief valve on the outlet stem assembly. Once unit is
depressurized, activate flag handle on the eyewash
assembly to ensure unit is completely depressurized. Keep
flag handle open. Note: Depressurize tank completely before
proceeding to step 2.
2. Loosen and remove (2) bolts, nuts, clips, and the clamp
from the tank, raise the eyewash assembly from the tank.
3. Fill tank with 10 gallons of clear, clean potable water only.
Then add entire bottle of bacteriostatic additive included
with the unit. DO NOT OVERFILL!
4. Replace eyewash assembly ensuring that the eyewash
assembly flag handle and the eyewash sign on the vessel
are facing the same direction. Reclamp securely in place by
tightening the nuts. Replace clips.
5. Using the Schrader air intake valve, pressurize unit to 80
PSI. Be sure to use a clean air source. DO NOT USE CO
OR ANY OTHER HIGH PRESSURE GAS! DO NOT CONNECT
DIRECTLY TO ANY EXTERNAL AIR OR GAS SOURCE!
6. Run unit momentarily to purge air and any contaminants
from system.
Note: Water should be drained and replaced with
fresh water and one bottle of bacteriostatic additive (G1540BA)
at least once every six months.
CAUTION: KEEP UNIT AWAY FROM HEAT!
1. IMPORTANT: Depressurize tank by activating pressure
relief valve on the outlet stem assembly. Once unit is
depressurized, activate flag handle on the eyewash
assembly to ensure unit is completely depressurized. Keep
flag handle open. Note: Depressurize tank completely before
proceeding to step 2.
2. Loosen and remove (2) bolts, nuts, clips and the clamp
from the tank. Raise the eyewash assembly from the tank.
3. Drain water from the vessel.
4. Replace eyewash assembly. Reclamp securely in place by
hand tightening the nuts. Replace clips.
Rev. 030320 / © Guardian Equipment
Decommissioning of Unit


Product specificaties

Merk: Guardian
Categorie: Niet gecategoriseerd
Model: G1562

Heb je hulp nodig?

Als je hulp nodig hebt met Guardian G1562 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden