Gravity LTS 01 B SET 1 Handleiding

Gravity DJ Gear LTS 01 B SET 1

Lees hieronder de 📖 handleiding in het Nederlandse voor Gravity LTS 01 B SET 1 (2 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
LTS 01 B SET 1
ADJUSTABLE STAND FOR LAPTOPS AND CONTROLLERS
INCLUDING NEOPRENE PROTECTION BAG
FEATURES
• Folding stand for 12” to 17” laptops
Also accomodates controllers such as Launchpad, Maschine or Push 2
• Extremely sturdy lightweight aluminum construction
• Ultra quick setup and secure tilt adjustment of support and base
• Non-slip rubber pads
• Folds to a compact transport size
• Set includes high-quality neoprene protection bag
DESCRIPTION
Featuring a revolutionary patented design, this laptop stand is extremely
stable yet lightweight and easily portable. It accomodates all sizes from 12”
to 17”, controllers such as Launchpad, Maschine or Push 2 and folds to com-
pact transport dimensions in seconds. Eccentric locking clamps facilitate
quick and secure tilt adjustment of both the nonslip rubberized support and
base for optimum ergonomic setup. The set includes a neoprene protection
bag to protect the laptop stand from dirt and scratches.
SPECIFICATIONS
Product number GLTS01BSET1
Product type Stands and Tripods
Type Laptop Stand
Material Aluminum
Surface Powder coated
Colour Black
Depth 280 mm
Support depth 145 mm
Width 260 mm
Support width 200 mm
Height 270 mm
Max. board
thickness for table
mounting bracket
55 mm with base, 60 mm without base
Maximum load 8 kg
Weight 1.2 kg
Additional infor-
mation
With high quality protective neoprene carry bag
Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SICHERHEITSHINWEISE
1. Bitte lesen Sie diese Bedienungsanleitung sorgfältig, bevor Sie mit der
Montage und dem Aufbau beginnen.
2. Bewahren Sie alle Informationen und Anleitungen an einem sicheren Ort auf.
3. Folgen Sie den Anleitungen.
4. Beachten Sie stets alle Sicherheitshinweise. Entfernen Sie niemals
Sicherheitshinweise oder andere Informationen von dem Produkt.
5. Seien Sie beim Aufbauen des Produkts aufmerksam und schützen sich
vor Verletzungen.
6. Dieses Produkt ist ausschließlich für den Einsatz in Innenräumen bestimmt.
Der Einsatz im Außenbereich kann zu Schäden am Produkt und zu
Personenschäden führen.
7. Nehmen Sie keine Veränderungen an diesem Produkt vor.
8. Beachten Sie bei der Entsorgung die in Ihrem Land geltenden Gesetze.
Trennen Sie bei der Entsorgung bitte Kunststoff und Papier bzw.
Kartonagen voneinander.
9. Kunststoffbeutel müssen außer Reichweite von Kindern aufbewahrt werden.
10. Falls Sie Fragen zu dieser Anleitung oder zu den Sicherheitshinweisen
haben, wenden Sie sich bitte an Ihren Fachhändler/Vertrieb.
HERSTELLERGARANTIE & HAFTUNGSBESCHRÄNKUNG
Unsere aktuellen Garantiebedingungen und Haftungsbeschränkung finden
Sie unter: https://cdn-shop.adamhall.com/media/pdf/MANUFACTUR-
ERS-DECLARATIONS_GRAVITY.pdf
Im Service Fall wenden Sie sich bitte an Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / E-Mail Info@adamhall.com / +49 (0)6081 / 9419-0
KORREKTE ENTSORGUNG DIESES PRODUKTS
(Gültig in der Europäischen Union und anderen europäischen Ländern
mit Mülltrennung) Dieses Symbol auf dem Produkt oder dazugehörigen
Dokumenten weist darauf hin, dass das Gerät am Ende der Produktle-
benszeit nicht zusammen mit dem normalen Hausmüll entsorgt werden darf,
um Umwelt- oder Personenschäden durch unkontrollierte Abfallentsorgung zu
vermeiden. Bitte entsorgen Sie dieses Produkt getrennt von anderen Abfällen
und führen es zur Förderung nachhaltiger Wirtschaftskreisläufe dem Recy-
cling zu. Als Privatkunde erhalten Sie Informationen zu umweltfreundlichen
Entsorgungsmöglichkeiten über den Händler, bei dem das Produkt erworben
wurde, oder über die entsprechenden regionalen Behörden. Als gewerblicher
Nutzer kontaktieren Sie bitte Ihren Lieferanten und prüfen die ggf. vertraglich
vereinbarten Konditionen zur Entsorgung der Geräte. Dieses Produkt darf nicht
zusammen mit anderen gewerblichen Abfällen entsorgt werden.
LTS 01 B SET 1
VERSTELLBARER STÄNDER FÜR LAPTOPS UND
CONTROLLER INKLUSIVE NEOPREN-SCHUTZTASCHE
FEATURES
• Zusammenklappbarer Laptopständer für alle Formate von 12 bis 17”
Auch für Controller wie Launchpad, Maschine oder Push 2 geeignet
• Extrem stabile, leichte Aluminium-Konstruktion
• Blitzschneller Aufbau und variable Neigung von Ablage und Fuß
• Rutschfeste Gummiauflagen
Kompakte Transportgröße
• Inklusive Schutztasche aus hochwertigem Neopren
BESCHREIBUNG
Durch sein revolutionäres, patentiertes Design bietet dieser Laptopständer
mtliche Vorteile wie extreme Stabilität, geringes Gewicht und bequeme
Transportierbarkeit. Er ist für alle Formate von 12” bis 17” und Controller wie
Launchpad, Maschine oder Push 2 geeignet und lässt sich in Sekunden
auf eine kompakte Größe zusammenklappen. Für eine optimale Ergonomie
erlauben sicher verriegelnde Exzenterklemmen die blitzschnelle Neigung und
Arretierung von Ablage und Fuß, die rutschfest gummiert sind. Zum Set gehört
eine Schutztasche aus Neopren, die den Laptopständer vor Schmutz und
Kratzern schützt.
SPEZIFIKATION
Artikelnummer GLTS01BSET1
Produktart Ständer und Stative
Typ Laptopständer
Material Aluminium
Oberäche pulverbeschichtet
Farbe schwarz
Tiefe 280 mm
Tiefe Ablage 145 mm
Breite 260 mm
Breite Ablage 200 mm
Höhe 270 mm
Max. Plattenstärke
für Tischbefesti-
gungsklammer
55 mm mit Standf, 60 mm ohne Standf
Maximale Belast-
barkeit
8 kg
Gewicht 1,2 kg
Zusatzinforma-
tionen
Mit passender Schutztasche aus hochwertigem
Neopren


Product specificaties

Merk: Gravity
Categorie: DJ Gear
Model: LTS 01 B SET 1

Heb je hulp nodig?

Als je hulp nodig hebt met Gravity LTS 01 B SET 1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding DJ Gear Gravity

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear