Audient Horizon 16 Handleiding
Pagina's 8 DJ Gear
Bekijk de handleiding van Audient Horizon 16 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
Quick Start Guide V1.1
Control Wheel
(Gain / Monitor
Volume)
Output Signal
Meters
Dual
ADAT I/O
BNC Word
Clock In/Out
DB25 Line
Input Ports x 2
Please read this quick guide to help get you started. For more information on operating your
Horizon 16, please download the full user manual from:
audient.com/horizon16/downloads
You can also visit our Help Desk at https://support.audient.com
for FAQ’s and further guides on setting up your interface.
Welcome to your new Audient Horizon 16 Audio Interface
Power
DB25 Line
Outputs Ports x 2
Thunderbolt 3
Connection
(x2, for daisy-chaining)
Output TRS
Jacks 17-18
Input TRS
Jacks 17-18
Motion UI
Display
Thunderbolt Connection
Your Horizon 16 is supplied with an IEC power cable only. A Thunderbolt cable is not
included, as cable length and specication needs vary from user to user.
Horizon interfaces use the Thunderbolt 3
standard and cannot be used with a regular
USB-C cable, look for the Thunderbolt logo on
the cable to guarantee compatibility. Horizon
is also compatible with Thunderbolt 4 and 5
cables as these are backwards compatible.
Look for this logo on any cable before
connecting it to Horizon.
It doesn't matter which Thunderbolt port is used on
each unit, as long as every device is connected in
the chain.
1. Connect the Horizon device closest to your
computer directly to one of the computer's
Thunderbolt ports.
2. Connect the second Thunderbolt port on this
rst Horizon device to a Thunderbolt port on the
second Horizon device.
3. Repeat this pattern in a daisy-chain up to
a maximum of four Horizon devices. It doesn't
matter which port is used on each unit, as
long as every device is connected in the chain.
Connecting Horizon units to separate Thunderbolt
ports on the host computer is unsupported.
4. Starting from the Word Clock output of the
primary device, chain 75Ohm BNC cables to the
next device’s Word Clock input. Repeat for all
devices in the chain.
Please note: daisy changing devices requires
a BNC connection between devices to avoid
sample clock issues.
5. Power on each Horizon device at the mains. If
a connection isn't detected, or a device becomes
disconnected, the Motion UI display will show a
screen indicating a valid Thunderbolt connection
is needed.
6. It is also possible for you to attach each device
to your host computer if you choose. This will also
require clocking the devices via BNC wordclock
cables.
What's in the box
Choosing a Cable
Daisy-Chaining Multiple Units
Product specificaties
| Merk: | Audient |
| Categorie: | DJ Gear |
| Model: | Horizon 16 |
Heb je hulp nodig?
Als je hulp nodig hebt met Audient Horizon 16 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden