Gigabyte GA-7VT600-L Handleiding

Bekijk gratis de handleiding van Gigabyte GA-7VT600-L (104 pagina’s), behorend tot de categorie Moederbord. Deze gids werd als nuttig beoordeeld door 35 mensen en kreeg gemiddeld 4.5 sterren uit 6 reviews. Heb je een vraag over Gigabyte GA-7VT600-L of wil je andere gebruikers van dit product iets vragen? Stel een vraag

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP

card is AGP 4X/8X(1.5V).

Caution: AGP 2X(3.3V) card is not supported by VIA® KT600. You

might experience system unable to boot up normally. Please insert

an AGP 4X/8X(1.5V) card

Example 1: Diamond Vipper V770 golden finger is compatible with

2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X

(1.5V) mode by adjusting the jumper. The factory default for this card is

2X(3.3V).

The GA-7VT600(-L) (or any AGP 4X only) motherboards might not

function properly, if you install this card without switching the jumper to

4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by "Power

Color", the graphics card manufacturer & some SiS 305 cards, their

golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but

they support 2X(3.3V) only. The GA-7VT600(-L) (or any AGP 4X only)

motherboards might not function properly, If you install thiscard in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on

ATi Rage 128 Pro chip, the design of AG32S(G) is compliance

with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work

fine with VIA® KT600 based motherboards.

AGP 4X/8X notch

Product specificaties