Gigabyte GA-7NNXPV Handleiding

Bekijk gratis de handleiding van Gigabyte GA-7NNXPV (112 pagina’s), behorend tot de categorie Moederbord. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.0 sterren uit 6 reviews. Heb je een vraag over Gigabyte GA-7NNXPV of wil je andere gebruikers van dit product iets vragen? Stel een vraag

When you installing AGP card, please make sure the following notice

is fully understood and practiced. If your AGP card has "AGP 4X/8X

(1.5V) notch"(show below), please make sure your AGP card is AGP

4X/8X.

Caution: AGP 2X card is not supported by nVIDIA® nForce™ 2 IGP/SPP.

You might experience system unable to boot up normally. Please

insert an AGP Pro 4X/8X card.

Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X

mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode

by adjusting the jumper. The factory default for this card is 2X(3.3V). The

GA-7NNXPV / GA-7NNXP / GA-7N400V Pro / GA-7N400 Pro / GA-7N400-

L1 (or any AGP Pro 4X/8X only) motherboards might not function properly, if

you install this card without switching the jumper to 4X(1.5V) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",

the graphics card manufacturer & some SiS 305 cards, their golden finger is

compatible with 2X(3.3V) / 4X(1.5V) mode AGP slot, but they support

2X(3.3V) only. The GA-7NNXPV / GA-7NNXP / GA-7N400V Pro / GA-7N400

Pro / GA-7N400-L1 (or any AGP Pro 4X/8X only) motherboards might not

function properly, If you install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage

128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)

specification. Therefore, AG32S(G) will work fine with nVIDIA® nForce2 IGP/

SPP based motherboards.

Before you install PCI cards, please remove the Dual BIOS label from PCI

slots if there is one.

AGP 4X/8X notch

Product specificaties