GE Café CXPR8HKPTCU Handleiding

Bekijk gratis de handleiding van GE Café CXPR8HKPTCU (2 pagina’s), behorend tot de categorie Fornuis. Deze gids werd als nuttig beoordeeld door 73 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over GE Café CXPR8HKPTCU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

31-2000914 05-21

I. Removing the Handle

1. Locate the set screws on the handle caps (they are usually on the

less visible side).

2. Loosen the set screw on one end with the 1/8” Allen wrench while

supporting the handle. Do not remove the set screw from the

handle cap (fig 1).

3. Keep supporting the handle while you loosen the set screw on the

other handle cap. Lift the handle from the fasteners on the door

and set aside.

II. Replacing a New Handle

1. Make sure the set screws are loosened. Place the handle over the

fasteners of the door (we recommend putting the screw side of the

handle toward the less visible side). Take care to support the

handle so it doesn’t fall and scratch the appliance finish. Make sure

both the handle caps are resting on the face of the door.

2. Lock one end of the handle into position by tightening the set

screw in the handle cap with the 1/8” Allen wrench. Be sure not to

over tighten.

3. Keep supporting the handle as you lock the other end of the

handle into position by tightening the set screw in the handle cap

with the 1/8” Allen wrench. Be sure not to over tighten.

Repeat these instructions on all other handles.

Instructions for Replacing Appliance Handles

Instrucciones En Español | Instructions En Français:

www.cafeappliances.com/custom-hardware/installation/

3/16” Allen Wrench

(not included)

1/8” Allen Wrench

(included with handle)

Tools You Will Need:

Replacing Your Café Knobs & Handles

LOOSEN

fig. 1

fig. 2

fastener

handle cap

set screw

set screw

The handle on your appliance may have a dierent orientation than what is

shown, but the installation will be the same.

Be extra careful of the appliance finish around the handle area, as it can

scratch. During removal of the handle screws, hold onto the handle tightly

so it won’t fall and scratch the appliance. We recommend having another

person help you hold the handle in place as you remove the screws.

When the handle has been removed, check the fasteners that are

attached to the appliance front to see if they are loose. If so, tighten them

with a 3/16” Allen wrench before attaching the new handle.

Note: Fastener shape may vary by appliance.

For appliances with multiple handles, look at your current configuration

before removing the handles, and make sure the replacement handles

match that logo and set screw position.

IMPORTANT!

Product specificaties