Garde XL TSXL14 Handleiding
Garde XL
Snijmachine
TSXL14
Bekijk gratis de handleiding van Garde XL TSXL14 (4 pagina’s), behorend tot de categorie Snijmachine. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over Garde XL TSXL14 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
USER MANUAL
Item #181TSXL316 Item #181TSXL14 Item #181TSXL38
Item #181TSXL732
07/2021
Tomato Slicer XL
3
/
16
”
1
/
4
”
3
/
8
”
7
/
32
”
Safety Instructions
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades.
Preparation
1) This unit comes fully assembled.
2) Place the unit on a sturdy work surface.
3) The guides for the pusher assembly located along the sides of the cung board need to be lubricated
regularly to keep your slicer operang properly. Using a food grade sanitary lubricant (such as
401PETROLGEL) will ensure you get a clean slice every me.
Cleaning and Maintenance
1) Remove the thumb screws and the slide stop from the pusher assembly. Pull the pusher o the end of the
slide board.
2) Remove the mounng screws from the slide board and blade shield.
3) To totally disassemble the pusher assembly, remove the acorn and hex nuts on the top of the stack and
carefully remove the pusher plates and spacers. Remove the addional screws if you wish to disassemble
the guide plate.
4) To re-assemble, reverse the procedure. NOTE: Always rinse the tomato slicer in cold or lukewarm water
aer it has been washed in hot water. Hot water makes the slide board expand which may make it
dicult to use the pusher assembly unl the slide board returns to room temperature. Aer re-assembly,
you must retenon the blades.
Blade Tension Instructions
1) Ensure that the blade holder assembly is rmly mounted on the frame with the sharp side of the blades
toward the pusher assembly.
2) Be sure the hex head screws on the right side of the blade holder are ght.
3) Tighten the hex head screws on the le end of the blade holder unl the blades “hum” when strummed
or plucked.
4) Check the blade tension each me the machine is used.
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following the instrucons
listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
USER MANUAL
Replacement Parts
3/16” Blade Assembly
#181TSXLBD316
7/32” Blade Assembly
#181TSXLBD732
3/16” Pusher Head
Assembly
#181TSXLP316
7/32” Pusher Head
Assembly
#181TSXLP732
1/4” Blade Assembly
#181TSXLBD14
1/4” Pusher Head
Assembly
#181TSXLP14
3/8” Blade Assembly
#181TSXLBD38
3/8” Pusher Head
Assembly
#181TSXLP38
Suction Foot
#181SUCCUPFT
USER MANUAL
Product specificaties
| Merk: | Garde XL |
| Categorie: | Snijmachine |
| Model: | TSXL14 |
Heb je hulp nodig?
Als je hulp nodig hebt met Garde XL TSXL14 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine Garde XL
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
Handleiding Snijmachine
- Westfalia
- Philco
- Bifinett
- Unold
- Sunbeam
- Borner
- Clas Ohlson
- Avantco
- Vollrath
- Choice
- Cuisinart
- H.Koenig
- Harper
- Krups
- Hyundai
Nieuwste handleidingen voor Snijmachine
12 Augustus 2025
12 Augustus 2025
12 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025
11 Augustus 2025