Fredenstein Artistic Compressor Plus Handleiding

Fredenstein Niet gecategoriseerd Artistic Compressor Plus

Lees hieronder de 📖 handleiding in het Nederlandse voor Fredenstein Artistic Compressor Plus (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

Artistic

Compressor Plus

Operating Manual

Fredenstein Artistic Compressor Plus

The Artistic Compressor Plus is a single channel FET compressor with multi-channel link capability

in the 500 series form factor.

The Compressor Plus features rotary controls for Input Gain, Release Time, Compression Ratio,

Make-up Gain and Wet-Dry Mixing (parallel compression). The Attack Time can be set in three

steps, as well as the side-chain low cut filter. The LED bar-graph meter indicates the gain reduction

in the range of 1dB to 16dB. It's punchy and detailed sound is generated by three major

components:

1) Fredenstein's proprietary Reverse-Mancini FET architecture

2) our advanced OPA2 discrete Audio Operational Amplifier

3) the American made vintage style steel core output transformer

As all Fredenstein products, the Artistic Comp is designed by a German-American team and

manufactured in Taiwan.

Installation:

Please power down your rack or box first, before inserting the Artistic Compressor Plus. Since the

Artistic Comp uses the link interconnect in the box or rack, it cannot coexist with any other third-

party modules using the same link interconnect (PIN 6 on the edge connector). If you are using a

Fredenstein Bento box, please turn off the compressor link switches to any third party module(s),

only turn on the link switches between Artistic Comp modules.

Other third party equipment not using the link interconnect, such as most Mic-Pres and EQs etc,

can be used simultaneously with the Artistic Comp in any enclosure. The power requirements are

very light at maximum of +/-16V, +/-75mA and should not overload any enclosure.

Note:

The Artistic CompPlus includes a switch called “SC Input” which allows an external signal to

control the gain of the main signal. This can have applications from simple “ducking” or using an

EQ to set up some frequency shaped sensitivity like de-essing or even setting up a parallel track

with automation to adjust the compression for different sections of the song.

However – if you don't have a Fredenstein rack with the EXT inputs, this function simply won't

have a source so there will be no compression in that case. Similarly, if you don't have a signal fed

into the EXT input – zero compression.

And if, at some point, the compressor just doesn't seem to be working, and you can even see the clip

LED showing a signal is patched in, don't panic, maybe the SC Input switch is in the EXT position.

It happens.

Fredenstein Artistic Comp Plus Manual V1.0 Dec. 15, 2015 Page 1

Fredenstein Artistic Compressor Plus

Rotary Controls:

INPUT : Sets the line level gain in the

range of -10 dB to +20 dB

RAT : Sets the compression ratio in the

range of 2:1 to 20:1

REL : Sets the release time of the

compressor from 70ms to 2.5s

OUTPUT : Make-up gain control in the

range of 0 dB to +20 dB

MIX : Output Mixer between the

compressed (wet) and

uncompressed (dry) signals

Switches:

SC Filter : Selects the low cut filter in the

side-chain.

lower position: off

middle position: 300Hz

upper position: 150Hz

SC Input : Position INT: Normal operation

EXT: Enables the external side-

chain input when used in Bento 6

or 10 racks through the AUX

input connector

LINK : Multi-channel synchronization

for two or more Artistic comp

modules. All channels will have

identical gain reduction to avoid

shifts in the balance

ATT : Compressor Attack Time

lower position: 0.5 ms

middle position: 25 ms

upper position: 5 ms

ON/BYP : in upper ON position, the

compressor is active, in the lower

BYP (BYPASS) position or if the

rack is powered down, a relay

connects the output directly to

the input, the gain reduction

meter will still show the depth

of compression

Indicators:

CLIP LED : Lit when the output level reaches

+24dBu (2db before clipping)

GR (Gain Reduction) : Shows actual gain reduction in

the range of 1db to 8db in one db

steps and 2dB for 8dB to 16dB

Fredenstein Artistic Comp Plus Manual V1.0 Dec. 15, 2015 Page 2

Product specificaties

Merk:	Fredenstein
Categorie:	Niet gecategoriseerd
Model:	Artistic Compressor Plus

Heb je hulp nodig?

Als je hulp nodig hebt met Fredenstein Artistic Compressor Plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Fredenstein

Fredenstein Artistic Comp SE Handleiding

7 December 2023

Fredenstein Bento 2 Pure Analog Handleiding

7 December 2023

Fredenstein Artistic MIC-PRE SE Handleiding

16 November 2023

Fredenstein Artistic Compressor Plus Handleiding

15 November 2023

Fredenstein Bento 8 Handleiding

9 Mei 2023

Fredenstein F200 Handleiding

8 Mei 2023

Fredenstein Bento 2 Handleiding

8 Mei 2023

Fredenstein Artistic Mic-Pre Handleiding

30 April 2023

Fredenstein Bento 6 DS Handleiding

25 April 2023

Fredenstein F607 Handleiding

14 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024

Sony PDW-U4 Handleiding

26 April 2024

Sony NXL-FR318 Handleiding

26 April 2024