Fredenstein Artistic Comp SE Handleiding

Fredenstein Niet gecategoriseerd Artistic Comp SE

Lees hieronder de đź“– handleiding in het Nederlandse voor Fredenstein Artistic Comp SE (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Artistic
Comp SE
Operating Manual
Fredenstein Artistic Comp SE
The Artistic Compressor SE is a single channel FET compressor with multi-channel link capability
in the 500 series form factor.
The Compressor SE features rotary controls for Input Gain, Release Time, Compression Ratio,
Make-up Gain and Wet-Dry Mixing (parallel compression). The Attack Time can be set in three
steps, as well as the side-chain low cut filter. The LED bar-graph meter indicates the gain reduction
in the range of 1dB to 16dB. It's punchy and detailed sound comes from Fredenstein's proprietary
Reverse-Mancini FET architecture
As all Fredenstein products, the Artistic Comp SE is designed by a German-American team and
manufactured in Taiwan.
Installation:
Please power down your rack or box first, before inserting the Artistic Compressor Plus. Since the
Artistic Comp uses the link interconnect in the box or rack, it cannot coexist with any other third-
party modules using the same link interconnect (PIN 6 on the edge connector). If you are using a
Fredenstein Bento box, please turn off the compressor link switches to any third party module(s),
only turn on the link switches between Artistic Comp modules.
Other third party equipment not using the link interconnect, such as most Mic-Pres and EQs etc,
can be used simultaneously with the Artistic Comp in any enclosure. The power requirements are
very light at maximum of +/-16V, +/-75mA and should not overload any enclosure.
Note:
The Artistic Comp SE includes a switch called “SC Input” which allows an external signal to
control the gain of the main signal. This can have applications from simple “ducking” or using an
EQ to set up some frequency shaped sensitivity like de-essing or even setting up a parallel track
with automation to adjust the compression for different sections of the song.
However – if you don't have a Fredenstein rack with the AUX inputs, this function simply won't
have a source so there will be no compression in that case. Similarly, if you don't have a signal fed
into the AUX input, no compression can be achieved.
And if, at some point, the compressor just doesn't seem to be working, and you can even see the clip
LED showing a signal is patched in, don't panic, maybe the SC Input switch is in the EXT position.
It happens.
Fredenstein Artistic Comp SE Manual V1.0 May 25, 2023 Page 1
Fredenstein Artistic Comp SE
Rotary Controls:
INPUT : Sets the line level gain in the
range of -10 dB to +20 dB
RAT : Sets the compression ratio in the
range of 2:1 to 20:1
REL : Sets the release time of the
compressor from 70ms to 2.5s
OUTPUT : Make-up gain control in the
range of -10 dB to +10 dB
MIX : Output Mixer between the
compressed (wet) and
uncompressed (dry) signals
Switches:
SC Filter : Selects the low cut filter in the
side-chain:
lower position: off
middle position: 300Hz
upper position: 150Hz
SC Input : INT Position: Normal operation
EXT: Enables the external side-
chain input when used in Bento 6
or 10 racks through the AUX
Input connector
LINK : Multi-channel synchronization
for two or more Artistic comp
modules. All channels will have
identical gain reduction to avoid
shifts in the balance
ATT : Compressor Attack Time
lower position: 0.5 ms
middle position: 25 ms
upper position: 5 ms
ON/BYP : in upper ON position, the
compressor is active, in the lower
BYP (BYPASS) position or if the
rack is powered down, a relay
connects the output directly to
the input.
Indicators:
GR : the gain reduction meter will still
show the depth of compression
Clip LED : Lit when the output level reaches
+24dBu (2db before clipping)
GR (Gain Reduction) : Shows actual gain reduction in
the range of 1db to 8db in one db
steps and 2dB for 8dB to 16dB
Fredenstein Artistic Comp SE Manual V1.0 May 25, 2023 Page 2

Product specificaties

Merk: Fredenstein
Categorie: Niet gecategoriseerd
Model: Artistic Comp SE

Heb je hulp nodig?

Als je hulp nodig hebt met Fredenstein Artistic Comp SE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Fredenstein

Fredenstein

Fredenstein Artistic Comp SE Handleiding

7 December 2023
Fredenstein

Fredenstein Bento 2 Pure Analog Handleiding

7 December 2023
Fredenstein

Fredenstein Artistic MIC-PRE SE Handleiding

16 November 2023
Fredenstein

Fredenstein Artistic Compressor Plus Handleiding

15 November 2023
Fredenstein

Fredenstein Bento 8 Handleiding

9 Mei 2023
Fredenstein

Fredenstein F200 Handleiding

8 Mei 2023
Fredenstein

Fredenstein Bento 2 Handleiding

8 Mei 2023
Fredenstein

Fredenstein Artistic Mic-Pre Handleiding

30 April 2023
Fredenstein

Fredenstein Bento 6 DS Handleiding

25 April 2023
Fredenstein

Fredenstein F607 Handleiding

14 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024
Sony

Sony PDW-U4 Handleiding

26 April 2024
Sony

Sony NXL-FR318 Handleiding

26 April 2024