Fostex RM-3DT Handleiding

Fostex Speaker RM-3DT

Lees hieronder de 📖 handleiding in het Nederlandse voor Fostex RM-3DT (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

Stereo rack monitor

RM-3DT

Owner’s Manual

Thank you very much for purchasing a Fostex product.

This manual provides instructions for basic use of the unit.

Read this before using the unit for the  rst time.

Table of contents

Introduction 2 ............................................................................

WARNINGS and PRECAUTIONS 2 ..........................

SAFETY INSTRUCTIONS 2 ...........................................

FCC (U.S.A.) & ICES-003 (Canada)

INFORMATION 2 ..............................................................

Features of the RM-3DT 2 ..........................................

Dante Network and System 3 .................................

Accessories 3 .....................................................................

Part names and functions 3 ..............................................

Front 3 ...................................................................................

Back 3 ....................................................................................

DIP switch settings 4 .............................................................

Meter 5 ...........................................................................................

Switches and buttons on the front of the unit

... 6

Dimensions 6 .............................................................................

Speci cations ......................................................................... 7

English

RM-3DT.indb 1

RM-3DT.indb 1RM-3DT.indb 1 2020/11/20 10:58

2020/11/20 10:58

2020/11/20 10:582020/11/20 10:58

Introduction

The RM-3DT is a rack-mount type powered monitor equipped with a Dante function, and provides Dante network signals and analog audio

signals monitoring.

 WARNINGS and PRECAUTIONS

• To prevent electric shock hazard, do not connect to mains CAUTION: The symbol

power supply while grille is removed.

• WARNING: An apparatus with CLASS I construction shall be connected to a MAINS

socket outlet with a protective earthing connection.

• TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE CAUTION:

SLOT, FULLY INSERT.

• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to

rain or moisture.

• Use of any controls or adjustments or performance of procedures other CAUTION:

than those herein specified may result in hazardous radiation exposure.

• WARNING: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

• WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to

avoid damaging the surface. Use a protective barrier between the unit and surface to

protect the surface.

• WARNING: Use of this unit near fluorescent lighting may cause interference regarding

use of the remote. If the unit is displaying erratic behavior move away from any

fluorescent lighting, as it may be the cause.

• WARNING: Do not install this equipment in a confined space such as a book case or

similar unit.

• WARNING: Mains plug is used as disconnect device and it should remain readily

operable during intended use. In order to disconnect the apparatus from the mains

completely, the mains plug should be disconnected from the mains socket outlet

completely.

CAUTION

WARNING: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USERSERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

 SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions should be read before

the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be retained for

future reference.

3. Heed Warnings - All warnings on the appliance and in the operating instructions

should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Water and Moisture - The appliance should not be used near water - for example,

near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a

swimming pool, and the like.

6. Carts and Stands - The appliance should be used only with a cart or

stand that is recommended by the manufacturer.

The appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn.

7. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only

as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location or position does

not obstruct proper ventilation. For example, the appliance should not be situated

on a bed, sofa, rug, or similar surface that may block the ventilation openings; or,

placed in a built-in installation, such as a bookcase or cabinet that may impede the

flow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat sources such as radiators,

heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power supply only of the

type described in the operating instructions or as marked on the appliance.

11. Grounding or Polarization - The precautions that should be taken so that the

grounding or polarization means of the appliance is not compromised.

12. Power Cord Protection - Power supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience receptacles, and the point where

they exit from the appliance.

13. Cleaning - The appliance should be cleaned only as recommended by the

manufacturer.

14. Nonuse Periods - The power cord of the appliance should be unplugged from the

outlet when left unused for a long period of time.

15. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids

are not spilled into the enclosure through openings.

16. Damage Requiring Service - The appliance should be serviced by qualified service

personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a marked change

in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Servicing - The user should not attempt to service the appliance beyond that

described in the operating instructions.

All other servicing should be referred to qualified service personnel.

18. The appliance should be situated away from drops of water or spraying water.

19. Objects containing liquid such as vases must not be put on the appliance.

20. The appliance is not completely isolated from the power supply even if the power

switch is in the off position.

21. Appliance shall not be exposed to dripping or splashing and no objects filled with

liquids, such as vases, shall be placed on the appliance.

22. Only use attachments/accessories specified by the manufacturer.

23. Appliances with a protective earth terminal should be connected to a mains outlet

with a protective earth connection.

24. The appliance should be placed in a position where an AC plug / inlet can be easily

pulled out by hand.

25. The main plug is used as the disconnection device. It shall remain readily operable

and should not be obstructed during intended use. To completely disconnect the

appliance from supply mains, the mains plug of the appliance shall be disconnected

from the mains socket outlet completely.

 FCC (U.S.A.) & ICES-003 (Canada) INFORMATION

1. IMPORTANT NOTICE

This product, when installed as indicated in the instructions contained in this manual,

meets FCC and ICES-003 requirements. Changes or modifications not expressly

approved by Fostex Company for compliance could void the user’ s authority to

operate the equipment. DO NOT MODIFY THIS PRODUCT.

2. IMPORTANT

In order to comply with FCC and ICES-003 requirements, use high quality shielded

cables for connection to accessories and / or another products. If any cables are

supplied with this product, they MUST be used. Follow all installation instructions.

Failure to do so could void your FCC / ICES-003 authorization to use this product in

the USA / Canada.

3. NOTE

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

4. Compliance with Part 15 of FCC Rules and Canadian ICES-003.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

 Features of the RM-3DT

• The unit supports balanced analog input and Dante input.

• It has a power saving design with a digital amplier and switched-mode power supply.

• The 26 dot LED meter supports 4 dierent display modes: VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.

• The display has 4 brightness settings.

• The unit is designed to output either or both of any two-channel digital signals out of Dante network signals.

RM-3DT.indb 2

RM-3DT.indb 2RM-3DT.indb 2 2020/11/20 10:58

2020/11/20 10:58

2020/11/20 10:582020/11/20 10:58

English

Part names and functions

 Front

①

②

③ ④ ⑤ ⑦⑥ ⑧

① Speakers

The speakers do not emit any sound while headphones are

connected to the [PHONES] jack.

② Level meter

③ Status display

④ [PHONES] jack

⑤ Volume knob

⑥ Mute button

Press the button for approximately one second to mute

( page 6). Cancel mute by briey pressing the button again.

⑦ [OUTPUT] switch

 page 6

⑧ [INPUT] switch

 page 6

 Back

ANALOG INPUT

L R L

ANALOG THRU OUT Dante IN 12345678

DIMMER

METER

PEAK/VU

SOUND

MUTE

REF LVL

POWER

OFF

AC IN

⑨ ⑩ ⑪ ⑫ ⑬ ⑭

⑨ [ANALOG INPUT] terminals (XLR)

⑩ [ANALOG THRU OUT] terminals (XLR)

Outputs the signal being input through the [ANALOG INPUT]

(XLR) terminal.

⑪ [Dante IN] terminal

Inputs Dante signals.

Connects a LAN cable (RJ45 type). Use an Ethernet cable with

CAT5e or higher.

⑫ DIP switches

Used to congure various settings ( page 4).

⑬ [POWER] switch

⑭ [AC IN] terminal

Used to connect to a power outlet using the supplied power

cord.

A grounding type plug has a third grounding prong. The third

prong are provided for your safety.

If the provided plug does not t into your AC outlet, consult an

electrician for replacement of the obsolete outlet.

Do not use any power cord other than the one supplied.

 Dante Network and System

Dante® is a network-audio protocol developed by Audinate.

Dante network system transmits multiple uncompressed digital audio signals over IP networks compatible with Gigabit Ethernet.

For more information on Dante, visit the website below.

www.audinate.com

 Accessories

• Power cable (USA: 1 pc, EUR/UK: 2 pcs)

• Rubber feet × 4

• Safety information sheet × 1

• Owner’s manual (this manual) × 1

RM-3DT.indb 3

RM-3DT.indb 3RM-3DT.indb 3 2020/11/20 10:58

2020/11/20 10:58

2020/11/20 10:582020/11/20 10:58

Product specificaties

Merk:	Fostex
Categorie:	Speaker
Model:	RM-3DT

Heb je hulp nodig?

Als je hulp nodig hebt met Fostex RM-3DT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Fostex

Fostex PM0.5d Handleiding

27 April 2023

Fostex PM0.3dH Handleiding

21 April 2023

Fostex PM0.4cB Handleiding

13 Maart 2023

Fostex 6301N Handleiding

4 Maart 2023

Fostex RM-3DT Handleiding

8 Januari 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024

REL Acoustics Strata Handleiding

20 April 2024

REL Acoustics Strata III Handleiding

20 April 2024

Soen Transit Handleiding

18 April 2024

Miller & Kreisel MP300RC Handleiding

18 April 2024

Soen Transit XS Handleiding

18 April 2024

Miller & Kreisel MP7 Handleiding

18 April 2024

Qian QRBT1801 Handleiding

17 April 2024

Focal Twin6 Handleiding

17 April 2024

Kenwood KFC-WPS1000F Handleiding

16 April 2024