Flymo Samurai 800 Handleiding

Flymo Grastrimmer Samurai 800

Lees hieronder de 📖 handleiding in het Nederlandse voor Flymo Samurai 800 (9 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

IMPORTANT INFORMATION

Read before use

& retain for future reference

For all customer enquiries or for replacement parts, contact:-

☎

☎0870 609 1901

www.flymo.com

customer.services@husqvarna.co.uk

SAMURAI 800/1000

AUTO-

MATIC SPEED

CONTROL FOR

YOUR SAFETY AND

COMFORT

Carton Contents

IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.

IF ANY PARTS ARE MISSING CONTACT:-

Husqvarna Outdoor Products Customer Service Department direct:-

Telephone : 0870 609 1901 Fax : 0870 609 1902

Safety

General

1. Never allow children or people unfamiliar with these

instructions to use the product. Local regulations

may restrict the age of the operator.

2. Only use the product in the manner and for the

functions described in these instructions.

3. Never operate the product when you are tired, ill or

under the influence of alcohol, drugs or medicine.

4. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

5. This product is intended to be used by a standing

operator, primarily for cutting grass and other

ground level plants.

Electrical

1. The British Standards Institute recommend the use

of a Residual Current Device (R.C.D.) with a tripping

current of not more than 30mA. Even with a R.C.D.

installed 100% safety cannot be guaranteed and

safe working practice must be followed at all times.

Check your R.C.D. every time you use it.

Before use, examine cable for damage, replace it if

there are signs of damage or ageing.

If not used properly this product can be dangerous! This product can cause serious injury to the opera-

tor and others, the warnings and safety instructions must be followed to ensure reasonable safety and

efficiency in using this product. The operator is responsible for following the warning and safety instruc-

tions in this manual and on the product.

Explanation of Symbols on the product

Warning

Read the user instructions carefully to

make sure you understand all the con-

trols and what they do.

Keep others, including children, pets and

bystanders outside the 10 metre hazard

zone. Stop the product immediately if you

are approached.

Wear eye protection.

To avoid the possibility of electric shock,

do not use in damp or wet conditions.

Switch off! Remove plug from mains

before adjusting, cleaning or if cable is

entangled or damaged.

Warning: The cutting line continues to rotate after the

machine has been switched off.

360º

10m

Electric Cable with

moulded on plug

Guard (with

bolt and nut)

Instruction

Manual

Steady Handle

(with bolt and

nut)

Cable

Management

Cable

Management

Hexagon

Drive Tool

Lock-off

button

3. Do not use the product if the electric cables are

damaged or worn.

4. Immediately disconnect from the mains electricity sup-

ply if the cable is cut, or the insulation is damaged.

Do not touch the electric cable until the electrical sup-

ply has been disconnected. Do not repair a cut or

damaged cable. Replace it with a new one.

5. Your extension cable must be uncoiled, coiled cables

can overheat and reduce the efficiency of your product.

6. Keep the cable clear of the cutting area and obsta-

cles at all times.

7. Do not pull cable around sharp objects.

8. Always switch off at the mains before disconnecting

any plug, cable connector or extension cable.

9. Never pull on the cable to disconnect any of the plugs.

10. Switch off, remove plug from mains and examine

electric supply cable for damage or ageing befor

winding cable for storage. Do not repair a damaged

cable, replace it with a new one. Use only Flymo

replacement cable.

11. Always wind cable carefully, avoiding kinking.

12. Use only on AC mains supply voltage shown on the

product rating label.

13. Flymo trimmers are double insulated to EN60335.

Under no circumstance should an earth be connect-

ed to any part of the trimmer.

Preparation

1. While using your product always wear substantial

footwear and long trousers.

2. Before using the machine and after any impact, check

for signs of wear or damage and repair as necessary.

3. Inspect the area to be cut before each use. Remove

all objects such as stones, broken glass, nails, wire,

string etc, which can be thrown or become entan-

gled in the trimmer head.

4. Check that the cutting head is fitted correctly.

Use

1. Use the product only in daylight or good artificial light.

2. Avoid operating your product in wet grass, where feasible.

3. Take care in wet grass, you may lose your footing.

4. On slopes, be extra careful of your footing and wear

non-slip footwear.

5. Do not walk backwards when operating, you could

trip. Walk never run.

6. Keep cutting head below waist level.

7. Never operate the product with damaged guards or

without guards in place.

8. Never fit metal cutting elements.

9. Keep hands and feet away from the cutting means at

all times and especially when switching on the motor.

10. Never pick up or carry a product by the cable.

11. Do not lean over the trimmer guard - objects may

be thrown by the cutting line.

12. Remove the plug from the mains :

- before leaving the product unattended for any period;

- before clearing a blockage;

- before checking, cleaning or working on the appliance;

- if you hit an object. Do not use your product until

you are sure that the entire product is in a safe

operating condition;

- if the product starts to vibrate abnormally. Check

immediately. Excessive vibration can cause injury.

Maintenance and storage

1. Keep all nuts, bolts and screws tight to be sure the

product is in safe working condition.

2. Replace worn or damaged parts for safety.

3. Only use the replacement cutting line specified for

this product.

4. Only use replacement parts and accessories recom-

mended by Husqvarna Outdoor Products.

5. To avoid the risk of injury keep fingers and hands clear

of the line cutter on the leading edge of the guard.

6. Inspect and maintain the product regularly. Any

repairs must be carried out by an authorised repair-

er.

Cables

IMPORTANT

Use only 1.00mm

2size cable up to 40 metres length

maximum.

Maximum rating:

1.00mm

2size cable, 10 amps 250 volts AC.

YOUR PRODUCT IS SUPPLIED WITH AN ELEC-

TRIC MAINS CABLE WIRED DIRECTLY INTO

THE PRODUCT.

1. Flymo Mains Cables and Extension Cables are

available from your local Approved Service Centre.

2. Do not wire an extension cable directly to your prod-

uct yourself. Please contact your local Approved

Service Centre for further information on the connec-

tors and kits available.

3. Only use extension cables specifically designed for

outdoor use.

CONNECTORS

Flymo connectors are suitable for use with 2 core cable

only. Under no circumstances should these connectors

be used for earthed products.

All Flymo connectors and cables are of splashproof

construction. They are not waterproof and must not be

left outside permanently nor should they be submerged

or immersed in water. Do not let cable lay or trail

through pools of water or splashed with water from

hose pipes.

MAINS PLUG REPLACEMENT

• If the plug supplied is cut off it should be

destroyed. There is an electric shock hazard if a

cut off plug is inserted into a 13 amp socket.

1. No earth required. Flymo products are double

insulated to EN60335 and under no circumstances

should an earth be connected to any part of the

product.

2. Ensure the mains voltage suits your product.

3. IMPORTANT!

The wires in the mains lead are coloured in accordance

with the following code:

BLUE - NEUTRAL

BROWN - LIVE

The wire which is coloured BLUE must be connected to

the Terminal which is marked with the letter ‘N’ or

coloured BLACK. The wire which is coloured BROWN

must be connected to the Terminal which is marked with

the letter ‘L’ or coloured RED.

4. It is important that the outer sheath is clamped cor-

rectly into the 3-pin plug.

5. If in doubt consult your local Service Repairer or

qualified electrician before the machine is used.

6. A 13 Amp fuse must be fitted to the Mains Plug.

7. The normal plug fuse and household fuse only pro-

tect the electrical equipment and are not a safe-

guard against electrocution.

If your product is hard wired i.e. non-detachable

mains electric cable, a conversion kit and exten-

sion cable is available from all Approved Service

Centres which can be found in your local Yellow

Pages.

Product specificaties

Merk:	Flymo
Categorie:	Grastrimmer
Model:	Samurai 800

Heb je hulp nodig?

Als je hulp nodig hebt met Flymo Samurai 800 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Grastrimmer Flymo

Flymo Mini Trim Auto Plus Handleiding

10 Oktober 2023

Flymo Easi Trim EHT 530 Handleiding

10 Oktober 2023

Flymo Multi Trim CT250X Handleiding

10 Oktober 2023

Flymo Contour Cordless XT Handleiding

10 Oktober 2023

Flymo SAMURAI 1000 Handleiding

10 Oktober 2023

Flymo Power Trim 500 XT Handleiding

10 Oktober 2023

Flymo Easi Trim EHT 530S Handleiding

10 Oktober 2023

Flymo Contour 700 Power Plus Handleiding

10 Oktober 2023

Flymo Mini Trim Auto plus XT Handleiding

10 Oktober 2023

Flymo MET 250DX Handleiding

10 Oktober 2023

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Worx WG185E Handleiding

26 April 2024

Worx WG157E Handleiding

26 April 2024

Worx WG183E Handleiding

17 April 2024

Worx WG119E Handleiding

17 April 2024

Shindaiwa T236TS Handleiding

11 April 2024

Fieldmann FZS 2107-E Handleiding

11 April 2024

Shindaiwa B45 Handleiding

11 April 2024

Shindaiwa B45LA Handleiding

11 April 2024

Grizzly ERT 3525 Handleiding

27 Maart 2024

Draper GTP34 Handleiding

27 Maart 2024