Stihl FS 561.0 C-EM Handleiding
Pagina's 112 Grastrimmer
Bekijk de handleiding van Stihl FS 561.0 C-EM gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
FS 561.0 C-M
WARNING
Read Instruction Manual thoroughly before use and
follow all safety precautions – improper use can cause
serious or fatal injury.
ADVERTENCIA
Antes de usar la máquina lea y siga todas las precauciones
de seguridad dadas en el manual de instrucciones – el uso
incorrecto puede causar lesiones graves o mortales.
2 - 52Instruction Manual
52 - 109Manual de instrucciones
Contents
1Introduction.................................................2
2Guide to Using this Manual.........................2
3Safety Precautions and Working Techni‐
ques............................................................3
4Approved Combinations of Cutting Attach‐
ment, Deflector, Limit Stop and Harness..19
5Mounting the Bike Handle.........................20
6Adjusting the Throttle Cable......................24
7Mounting the Deflector..............................24
8Mounting the Cutting Attachment..............25
9Fuel...........................................................30
10Fueling......................................................31
11Fitting the Full Harness.............................32
12Balancing the Machine..............................33
13Starting / Stopping the Engine..................33
14Transporting the Unit................................36
15Operating Instructions...............................37
16Air filter......................................................38
17Engine Management.................................38
18M-Tronic....................................................38
19Winter Operation.......................................39
20Spark Plug................................................40
21Engine Running Behavior.........................42
22Lubricating the Gearbox............................42
23Storing the Machine..................................42
24Sharpening Metal Cutting Blades.............42
25Maintaining the Mowing Head...................43
26Inspection and Maintenance by User........44
27Inspections and Maintenance by Dealer...44
28Maintenance and Care..............................45
29Main Parts.................................................47
30Specifications............................................48
31Maintenance and Repairs.........................49
32Disposal....................................................49
33Limited Warranty.......................................49
34STIHL Incorporated Federal Emission Con‐
trol Warranty Statement............................49
35Trademarks...............................................51
1Introduction
Allow only persons who fully understand this
manual to operate your clearing saw.
To receive maximum performance and satisfac‐
tion from your STIHL clearing saw, it is important
that you read, understand and follow the safety
precautions and the operating and maintenance
instructions in chapter "Safety Precautions and
Working Techniques" before using your clearing
saw. For further information you can go to
www.stihlusa.com.
Contact your STIHL dealer or the STIHL distribu‐
tor for your area if you do not understand any of
the instructions in this manual.
WARNING
Because a clearing saw is a high-speed cutting
tool some special safety precautions must be
observed to reduce the risk of personal injury.
Careless or improper use may cause serious or
even fatal injury.
Make sure your unit is equipped with the proper
deflector or limit stop, handle and harness for the
type of cutting attachment being used. Always
wear proper eye protection.
2Guide to Using this Manual
2.1Pictograms
The meanings of the pictograms attached to or
embossed on the machine are explained in this
manual.
Depending on the model concerned, the follow‐
ing pictograms may be on your machine.
Fuel tank for gasoline and
engine oil mixture
Press to operate decompression
valve
Manual fuel pump
Press to operate manual fuel
pump
Filler hole for gear lubricant
Air intake summer mode
Air intake winter mode
Handle heating
English
20458-856-8601-A
© ANDREAS STIHL AG & Co. KG 2025
0458-856-8601-A. VA4.E25.
Printed on chlorine-free paper
Paper is recyclable.
Original Instruction Manual
0000010989_006_GB
2.2Symbols in Text
Many operating and safety instructions are sup‐
ported by illustrations.
The individual steps or procedures described in
the manual may be shown in different ways:
►A bullet indicates a step or procedure.
A description of a step or procedure that refers
directly to an illustration may contain item num‐
bers that appear in the illustration. For example:
►Remove the screw (1)
►Pull the spark arresting screen (2) upwards
out of the muffler
In addition to the operating instructions, this
manual may contain paragraphs that require
your special attention. Such paragraphs are indi‐
cated with the symbols and signal words descri‐
bed below:
DANGER
Indicates a hazardous situation that, if not avoi‐
ded, will result in death or serious injury.
WARNING
Indicates a hazardous situation that, if not avoi‐
ded, could result in death or serious injury.
NOTICE
Indicates a risk of property damage, including
damage to the machine or its individual compo‐
nents.
2.3Engineering Improvements
STIHL’s philosophy is to continually improve all
of its products. As a result, engineering changes
and improvements are made from time to time.
Therefore, some changes, modifications and
improvements may not be covered in this man‐
ual. If the operating characteristics or the appear‐
ance of your machine differs from those descri‐
bed in this manual, please contact your STIHL
dealer or the STIHL distributor for your area for
assistance.
3Safety Precautions and
Working Techniques
Because a clearing saw is a
high-speed, fast-cutting power
tool sometimes equipped with
sharp cutting blades, special
safety precautions must be
observed to reduce the risk of
personal injury.
It is important that you read, fully
understand and observe the fol‐
lowing safety precautions and
warnings. Read the instruction
manual and the safety precau‐
tions periodically. Careless or
improper use may cause serious
or fatal injury.
The terminology utilized in this manual when
referring to the power tool reflects the fact that
different types of cutting attachments may be
mounted on it. The term "trimmer" is used to des‐
ignate an FS unit that is equipped with a nylon
line head or a head with flexible plastic blades
(i.e., the PolyCut head). A "brushcutter" designa‐
tes a unit equipped with a rigid metal blade.
Many FS models may be used as either a trim‐
mer or a brushcutter – therefore, the power tool
is referred in this manual as a "trimmer / brush‐
cutter." Some smaller and / or lightweight FS
models may only be used as a trimmer, i.e., they
may not be used with metal blades.
The term "clearing saw" indicates a high-pow‐
ered trimmer / brushcutter that is particularly
suited for use with a circular saw blade to clear
saplings or small trees.
WARNING
As more fully explained later in these Safety Pre‐
cautions, to reduce the risk of personal injury,
make sure your unit is equipped with the proper
deflector, limit stop and harness for the type of
cutting attachment you are using. Use only cut‐
ting attachments that are specifically authorized
by STIHL for use on your FS model.
Have your STIHL dealer show you how to oper‐
ate your power tool. Observe all applicable local
safety regulations, standards and ordinances.
WARNING
Do not lend or rent your power tool without the
instruction manual. Be sure that anyone using it
understands the information contained in this
manual.
3 Safety Precautions and Working TechniquesEnglish
0458-856-8601-A3
Product specificaties
| Merk: | Stihl |
| Categorie: | Grastrimmer |
| Model: | FS 561.0 C-EM |
Heb je hulp nodig?
Als je hulp nodig hebt met Stihl FS 561.0 C-EM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden