Fluke BP291 Handleiding

Fluke Accu BP291

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke BP291 (2 pagina's) in de categorie Accu. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

PN 4707531

July 2015

Specifications are subject to change without

notice. All product names are trademarks of

their respective companies.

BP290/BP291

Li- ion Battery Pack

Instruction Sheet

Introduction

BP290 and BP291 are Li-ion battery packs for use in the Fluke 190

Series II ScopeMeter Test Tools, the Fluke 430-II Power Quality Test

Tools, and other portable Fluke test tools. Check the users manual of

your test tool for compatibility. Within the battery pack, a microcontroller

keeps record of the charge condition of the battery and an LED indicator

is provided that informs you about the actual charge condition. The

indicator ha four LEDs and a test button. s

The battery charges when installed in the test tool or with the external

charger EBC290. To replace the battery in your test tool, see the users

manual for the test tool.

These battery packs have been tested in accordance with and comply to:

•UN Manual of Tests and Criteria Part III Subsection 38.3

(ST/SG/AC.10/11/Rev.5) – also known as the UN T19.T8 tests

•IEC62133

•DOT/IATA

Contacting Fluke

To contact Fluke, call one of the following telephone numbers:

•Technical Support USA: 1-800-44- -800-443-5853)FLUKE (1

•Calibration/Repair USA: 1-888-99- -888-993-5853)FLUKE (1

•Canada: 1-800- - -800-363-5853)36 FLUKE (1

•Europe: +31 402-675-200

•Japan: +81-3- -31146714

•Singapore: +65-6799-5566

•Anywhere in the world: +1-425-446-5500

Instructions

To use the BP290 with a 190 Series II ScopeMeter or 430-II Power

Quality Analyzer:

1. Carefully check for proper positioning of the support plate before

you remove the protective layer from the self-adhesive side of the

support plate. See in gure. A

2. Install the support plate on the battery pack . B

3. Place the battery with the support plate into the groove of the battery

compartment. Press rmly to make sure the battery is placed

correctly . C

The 291 does not need any modication before you install the battery BP

pack into the test tool.

The battery pack has an indicator four LEDs (25 %, 50 %, 75 %, and with

100 % charge) and a test button.

To check the battery charge:

1. Push . The LEDs light to show the battery charge level. T

If all four LEDs are on, the battery charge is at of capacity. 100 %

Product specificaties

Merk:	Fluke
Categorie:	Accu
Model:	BP291
Capaciteit van de accu/batterij:	4800 mAh
Aantal per verpakking:	1 stuk(s)
Compatibiliteit:	Fluke 190-Series-II
Bandbreedte:	- MHz
Batterijtechnologie:	Lithium-Ion (Li-Ion)