Fluke 87V Handleiding

Fluke Multimeter 87V

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 87V (36 pagina's) in de categorie Multimeter. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36

80 Series V

Digital Multimeter

Calibration Manual

PN 2102915

September 2004, Rev.1, 2/05

All product names are trademarks of their respective companies.

Lifetime Limited Warranty

Each Fluke 20, 70, 80, 170 and 180 Series DMM will be free from defects in material and workmanship for

its lifetime. As used herein, “lifetime” is defined as seven years after Fluke discontinues manufacturing the

product, but the warranty period shall be at least ten years from the date of purchase. This warranty does

not cover fuses, disposable batteries, damage from neglect, misuse, contamination, alteration, accident or

abnormal conditions of operation or handling, including failures caused by use outside of the product’s

specifications, or normal wear and warranty covers the original tear of mechanical components. This

purchaser only and is not transferable.

For ten years from the date of purchase, this warranty also covers the LCD. Thereafter, for the lifetime of

the DMM, Fluke will replace the LCD for a fee based on then current component acquisition costs.

To establish original ownership and prove date of purchase, please complete and return the registration card

accompanying the product, or register your product on http://www.fluke.com. Fluke will, at its option, repair

at no charge, replace or refund the purchase price of a defective product purchased through a Fluke

authorized sales outlet and at the applicable international price. Fluke reserves the right to charge for

importation costs of repair/replacement parts if the product purchased in one country is sent for repair

elsewhere.

If the product is defective, contact your nearest Fluke authorized service center to obtain return authorization

information, then send the product to that service center, with a description of the difficulty, postage and

insurance prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Fluke will pay return

transportation for product repaired or replaced in-warranty. Before making any non-warranty repair, Fluke

will estimate cost and obtain authorization, then invoice you for repair and return transportation.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A

PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS

OF DATA, ARISING FROM ANY CAUSE OR THEORY. AUTHORIZED RESELLERS ARE NOT

AUTHORIZED TO EXTEND ANY DIFFERENT WARRANTY ON FLUKE’S BEHALF. Since some states do

not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this

limitation of liability may not apply to you. If any provision of this warranty is held invalid or unenforceable by

a court or other decision-maker of competent jurisdiction, such holding will not affect the validity or

enforceability of any other provision.

Fluke Corporation Fluke Europe B.V.

P.O. Box 9090 P.O. Box 1186

Everett WA 5602 B.D. Eindhoven

2/02 98206-9090 The Netherlands

Table of Contents

Title Page

Introduction........................................................................................................ 1

Contacting Fluke................................................................................................ 1

Precautions and Safety Information................................................................... 2

Electrical Symbols ............................................................................................. 4

Specifications..................................................................................................... 4

General Specifications................................................................................... 4

Detailed Specifications.................................................................................. 5

Basic Maintenance ............................................................................................. 9

Cleaning the Meter ........................................................................................ 9

Opening the Meter Case ................................................................................ 9

Accessing the PCA and Replacing the LCD ................................................. 10

Reassembling the Meter Case........................................................................ 11

Replacing the Battery .................................................................................... 12

Testing Fuses and Current Circuitry.............................................................. 12

Replacing the Fuses....................................................................................... 13

Required Equipment .......................................................................................... 13

Performance Tests.............................................................................................. 14

Basic Operability Tests.................................................................................. 15

Testing the Fuses ........................................................................................... 15

Testing the Display........................................................................................ 15

Testing the Pushbuttons................................................................................. 17

Testing Meter Accuracy ................................................................................ 17

Testing the Inductive Pickup (88 Only) ........................................................ 19

Calibration Adjustment...................................................................................... 23

Calibration Adjustment Counter.................................................................... 23

Calibration Adjustment Password ................................................................. 23

Changing the Password............................................................................. 23

Restoring the Default Password ................................................................ 24

Meter Buttons Used in the Calibration Steps ................................................ 25

Calibration Adjustment Procedure ................................................................ 25

Service and Parts................................................................................................ 27

Product specificaties

Merk:	Fluke
Categorie:	Multimeter
Model:	87V
Gewicht:	355 g
Opbergetui:	Ja
Bereik temperatuurmeting:	-200 - 1090 °C
DC voltage bereik:	0 - 1000 V
Afmetingen (B x D x H):	98 x 52 x 201 mm
AC voltage bereik:	0 - 1000 V
AC stroom bereik:	0 - 10 A
Weerstand bereik:	0 - 50000000 Ohm
Capacitantie bereik:	0 - 9.999 nF
Diode test:	Ja
DC stroom bereik:	0 - 10 A
Resolutie (DC stroom):	0.1 µA
Weerstand resolutie:	0.1 Ohm
Resolutie (AC stroom):	0.1 µA
Resolutie (frequentie):	0.1 Hz