Festo SD-SUB-D-BU9 Handleiding

Bekijk gratis de handleiding van Festo SD-SUB-D-BU9 (56 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.4 sterren uit 4 reviews. Heb je een vraag over Festo SD-SUB-D-BU9 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Translation of the original instructions

© 2021 all rights reserved to Festo SE & Co. KG

1Applicable Documents

All available documents for the product www.festo.com/sp.è

2Safety

2.1Safety instructions

–Do not connect or disconnect plug connector when powered.

–Only mount the product on components that are in a condition to be safely

operated.

2.2Intended Use

Socket SUB-D for multi-pin plug connection, can be freely assembled.

2.3Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can eval-

uate the work and detect dangers. The qualified personnel are trained in electrical

engineering.

3Product Range Overview

3.1Scope of delivery

1

Cable fitting (1x)

2

Screw (2x)

3

Contact holder (1x)

4

Cover (1x)

5

Spring loaded contact (9x/25x)

Fig. 1

3.2Not in scope of delivery

6

Cable

Fig. 2

4Assembly

Fig. 3

1.Disconnect cable fitting.1

2.Guide cable through the cable fitting and the cover.614

3.Strip cable approx.40mm.

4.Strip insulation from wires approx.3mm.

5.Crimp spring loaded contacts to wires.5

The contact holder can be mounted in two different positions. The cable outlet dir-

ection of the mounted socket depends on the orientation of the contact holder.

Fig. 4

6.Align the contact holder in accordance with the desired cable outlet direc-3

tion.

Fig. 5

7.Insert the wires with the spring loaded contacts into the contact holder 53

and engage.

8.Pull the cable back so that a piece of cable sheath remains within the cov-6

er .4

Fig. 6

9.Place the contact holder in the cover . Avoid cable twist during insertion.34

10.Tighten cable fitting .1

11.Fasten the contact holder so that it is floating using the two screws .32

5Technical data

SD-SUB-D-...BU9BU25

Cable diameterD[mm]6 ... 97 ... 12

Cable fittingPg9Pg11

Type of mounting2 screws M3x16

Mounting positionany

Nominal operating voltage DCU

B

[V]24

Current rating[A]5

Material

HousingPA

Tab. 1 Technical data

8138547

SD-SUB-D-BU9/-BU25

Plug socket

8138547

2021-01a

[8138549]

Assembly instructions

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Product specificaties