Festo NEDU-L1R2-M12G5-M12LE-1R Handleiding

Bekijk gratis de handleiding van Festo NEDU-L1R2-M12G5-M12LE-1R (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.5 sterren uit 8 reviews. Heb je een vraag over Festo NEDU-L1R2-M12G5-M12LE-1R of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Translation of the original instructions

© 2020 all rights reserved to Festo SE & Co. KG

1Applicable documents

All available documents for the product www.festo.com/sp.è

DocumentProduct

User documentsIO-Link devices

User documentsUSB IO-Link Master CDSU-1

Tab. 1

2Safety

2.1Safety instructions

–Do not connect or disconnect plug connector when powered.

–Only mount the product on components that are in a condition to be safely

operated.

–Assembly and installation should only be carried out by qualified personnel.

These personnel have electrical training or a relevant qualification.

2.2Intended use

Connecting a field device with M12 plug to a USB IO-Link Master with additional

supply for port class B.

Field device: IO-Link devices.

USB IO-Link Master: CDSU-1

3Additional information

–Accessories www.festo.com/catalogue.è

4Configuration

4.1Product design

1

Socket

2

Plug

3

Wire end (2x)

4

Cable

5

Wires

Fig. 1 NEDU-L1R2-M12G5-M12LE-1R

4.2Contact assignment

Field device sideController side

PinSignalPin

142SocketController sidePlug connector

124 V (L+/Logic)1

30 V (L-/Logic)3

4C/Q (IO-Link)4

Additional supplyWire ends53

1)

224 VL (P24/load)RD

50 VL (N24/load)BK

Open end

1) Colour code in accordance with IEC60757:1983-01

Tab. 2 Contact assignment

5Assembly

5.1Assembly, field device side

1.Align socket to match plug.1

2.Connect socket to the plug.1

3.Tighten the screw-type lock of the socket. Tightening torque:1

0.3Nm±67%

5.2Assembly, controller side

1.Align the plug to match the socket.2

2.Insert the plug into the socket.2

3.Tighten the screw-type lock of the plug. Tightening torque: 0.3Nm±67%2

5.3Mounting the additional supply

1.Shorten and pre-assemble wire ends as needed.

2.Connect the wires in accordance with the contact assignment.

5.4Wiring

Character

istic

Cable characteristicWiring

-P-Basicstatic

Tab. 3 Wiring

6Technical data

NEDUL1R2M12G5M12LE1R

Cable characteristicFor static applications

Shieldingno

Current rating at 40°C[A]4

Surge resistance[kV]0.8

Operating voltage rangeDCU

B

[V]0…30

Cable composition

Controller side[mm²]3x0.254

Additional supply[mm²]2x0.55

Cable diameterD

Controller side[mm]3.84

Additional supply[mm]1.755

Bending radiusR

Controller side[mm]4

³12

Additional supply[mm]5

³6

Ambient temperature

Fixed cable installation[°C]30…80z+

Material

Cable sheathTPE-U(PUR)

Insulating sheathPVC

Electrical connection1

FunctionField device side

Connection typeSocket

Connection technologyM12x1 A-coded to EN61076-2-101

Type of mountingScrew-type lock with longitudinal knurl 18ß

Degree of protectionIP40 In assembled state

Electrical connection2

FunctionController side

IO-Link

Communication

Connection typePlug connector

Connection technologyM12x1 A-coded to EN61076-2-101

Type of mountingScrew-type lock with longitudinal knurl 13ß

Degree of protectionIP65, IP68, IP69K In assembled state

Electrical connection3

FunctionAdditional supply for Port Class B

Connection type2x single wires

Connection technologyOpen end

Wire endsCut off bluntly

Tab. 4 Technical data

8136091

NEDUL1R2M12G5M12LE1R

Distributor

8136091

2020-05a

[8136093]

Assembly instructions

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Germany

+49 711 347-0

www.festo.com

Product specificaties