Festo NEBL-M8G4-E-10-N-M8G4 Handleiding
Festo
Niet gecategoriseerd
NEBL-M8G4-E-10-N-M8G4
Bekijk gratis de handleiding van Festo NEBL-M8G4-E-10-N-M8G4 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 1.5 reviews. Heb je een vraag over Festo NEBL-M8G4-E-10-N-M8G4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
6.
8.
NEBL-M8...4-E-...-M8...4
Connecting cable
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
Assembly instructions
8168744
2022-02b
[8168746]
Translation of the original instructions
© 2022 all rights reserved to Festo SE & Co. KG
1
Applicable documents
All available documents for the product
è
www.festo.com/sp.
2 Safety
2.1 Safety instructions
–
Do not connect or disconnect the push-in connector while the voltage is live.
–Only mount the product on components that are in a condition to be safely
operated.
2.2 Intended use
Connecting cable for the power supply for applications with which a low voltage
drop is required, including for longer cables, e.g. for CPX-AP.
3
Structure
3.1 Product design
1 23
Fig. 1:
NEBL-M8G4-E-...-M8G4
1
Socket M8x1, A-coded
2
Plug M8x1, A-coded
3
Cable
1 23
Fig. 2:
NEBL-M8W4-E-...-M8W4
1
Socket M8x1, A-coded
2
Plug M8x1, A-coded
3
Cable
3.2 Contact assignment
Electrical connection 1
Field device side
Electrical connection 2
Controller side
1
Socket
Pin Pin 2
Plug con-
nector
1 1
2 2
3 3
4 4
Tab. 1:
Contact assignment
4
Assembly
4.1 Application of assembly tools
•
Use only a suitable tool with torque function for the screw-type lock with
hexagon and longitudinal knurl.
4.2 Mounting electrical connection 1
1. Align the socket to fit the plug.1
2.
Connect the socket to the plug.1
3. Tighten the screw-type lock of the socket . Tightening torque:1
0.2 Nm ± 50%
4.3 Mounting electrical connection 2
1. Align the plug to match the socket.2
2. Insert the plug into the socket.2
3. Tighten the screw-type lock of the plug . Tightening torque: 0.2 Nm ± 50% 2
4.4 Wiring
Feature Cable characteristic Wiring
-E Suitable for energy chains in energy chain or flexible
Tab. 2: Wiring
4.5 Strain relief
Strain relief for movable wiring
• Install the strain reliefs and mountings over a wide area to prevent damage to
the internal structure and outer cover.
4.6 Mounting in energy chain
1. Lay out the energy chain lengthways.
2.
Place the cables in the energy chain without twisting them.
3. Separate cables from each other using separators/drilled holes.
4. Do not bind cables in bundles.
5. Maintain space X. X 10% of the cable diameter D.>
With the energy chain hanging vertically: increase the space X.
Align the energy chain in the working position:
–
Make sure that the radius is greater than the bending radius R of the
cables.
–
The cables can move freely in the bending radius KR of the energy chain.
Ä
The cable movement is not forced by the energy chain.
7.
Mount the energy chain corresponding instruction manual.è
Fasten the cables:
–for short energy chains with a length 1 m at both ends of the energy chain<
–for long sliding energy chains with a length 1 m at the driver end only>
9.
Do not move cables all the way to the fastening point.
Ä
The mounting space A between the fastening point and bending move-
ment is maintained.
NOTICE
Damage to cables if the chain breaks.
• Replace cables after a chain break.
NOTICE
Malfunction and material damage due to vertically suspended cables.
The cables stretch.
• Regularly check the length of the cables.
•
Readjust the cables if required.
5 Technical data
NEBL-M8...4-E-...-M8...4
Cable characteristic Suitable for energy chains
Cable composition [mm²] 4x0.5
Shielding no
Cable diameter D [mm] 4.8
Mounting space A [mm] 96³
Current rating at 40 °C [A] 5.2
Surge resistance [kV] 0.8
Operating voltage range
AC U
B
[V] 0 … 30
DC U
B
[V] 0 … 30
Bending radius
Fixed cable installation R [mm] 15³
Flexible cable installation R [mm] 50³
Ambient temperature
Fixed cable installation [°C] –40 … +90
Note on the ambient temperature
with fixed cable installation
[°C] –40 … +75 for UL applications
Flexible cable installation [°C] –20 … +90
Note on the ambient temperature
with movable cable installation
[°C] –20 … +75 for UL applications
Material
Cable sheath TPE-U(PUR)
Insulating sheath PP
Electrical connection 1
Function Field device side
Connection type Socket
Connection technology M8x1 A-coded to EN 61076-2-104
Type of mounting Screw-type lock with hexagon 9 and longitu-ß
dinal knurl
Degree of protection IP65, IP67, IP69K In assembled state
Electrical connection 2
Function Controller side
Connection type Plug connector
Connection technology M8x1 A-coded to EN 61076-2-104
Type of mounting Screw-type lock with hexagon 9 and longitu-ß
dinal knurl
Degree of protection IP65, IP68, IP69K In assembled state
Tab. 3: Technical data
Product specificaties
| Merk: | Festo |
| Categorie: | Niet gecategoriseerd |
| Model: | NEBL-M8G4-E-10-N-M8G4 |
Heb je hulp nodig?
Als je hulp nodig hebt met Festo NEBL-M8G4-E-10-N-M8G4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Festo
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Handleiding Niet gecategoriseerd
- Easy Camp
- Kemo
- SMAJAYU
- Atlas Sound
- Simrig
- Ortlieb
- DigitSole
- Sencys
- Phoenix
- Lancom
- Master
- Markbass
- Rocket Espresso
- D-Jix
- ALM
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025