Felisatti PF110 Handleiding

Felisatti Schaafmachine PF110

Lees hieronder de 📖 handleiding in het Nederlandse voor Felisatti PF110 (24 pagina's) in de categorie Schaafmachine. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
РУБАНОК РУЧНОЙ
ЭЛЕКТРИЧЕСКИЙ
PF110/1100S
PLANERS
CEPILLOS
RABOTS
SPAZZOLE
HOBEL
PLAINAS
PF110/2000S
2
1 2
34
5
6
7
8 9
3
TECHNICAL DATA
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept
close at hand to use when carrying out maintenance on the
indicated parts.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the
tool is strictly forbidden.
PLANER SAFETY RULES
Planer Safety Rules
- Wait for the cutter to stop before setting the tool down. An
exposed cutter may engage the surface leading to possible
loss of control and serious injury.
- Do not reach into the saw dust ejector with your hands.
They could be injured by rotating parts.
- Apply the machine to the workpiece only when switched on.
Otherwise there is danger of kickback when the cutting tool
jams in the workpiece.
- When working, always hold the planer in such a manner that
the planer base plate faces at on the workpiece. Otherwise
the planer can become wedged and lead to injuries.
- Never plane over metal objects, nails or screws. The planer
blade and the blade shaft can become damaged and lead to
increased vibrations.
- Secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
- Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the mains plug
when the cable is damaged while working. Damaged cables
increase the risk of an electric shock.
Products sold in GB only: Your product is tted with an BS
1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug tted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
ILLUSTRATIONS
A Safety push button switch (Fig. 1)
B On-/off switch (Fig. 3)
E Drive wheel (Fig. 5)
F Toothed belt (Fig. 5)
G Idler pulley (Fig. 5)
I Side end-stop immobilisation control (Fig. 1 and 4)
J Circular depth graduation scale (Fig. 1)
K Depth graduation handle (Fig. 1)
L Lateral stop (Fig. 1)
M Sawdust extraction (Fig. 3)
N Cope depth end-stop (Fig. 3)
O Blade replacement screws (Fig. 6)
P Guide slot (Fig. 2)
Q Toothed belt cover (Fig. 5)
R Toothed belt cover screw (Fig. 5)
S Mobile plate (Fig. 2)
T Dust suction adapter (Fig. 1)
U Base plate (Fig. 2)
EQUIPMENT
- Dust suction adapter
- Hexagonal key
- Lateral stop
- Depth end-stop
- Operating instructions
- Safety instructions
- Warranty
BRIEF DESCRIPTION
This tool has been designed to rout wood and similar
materials, to plane irregular surfaces and to cant off edges.
BEFORE USING THIS TOOL
Before using the tool, make sure the mains voltage is correct: it
must be the same as that on the specication label. Machines
with 230V can also be connected to a 220-V mains supply.
START UP
WARNING! Only plug in when machine is switched off. Press
the locking button A, and squeeze the trigger in the on/off
switch B. When the on/off switch is released, the machine
stops.
For safety reasons, it is not possible to lock On/Off switch
B, instead it has to be pressed while the machine is being
used.
OPERATING INSTRUCTIONS
1. Planing depth
WARNING! Always unplug the machine before carrying out
work on it.
Regulate the cutting depth, from 0-3/3,5mm. without
gradations, turning the handle K. Fig. 1, making out the value
in the scales J.
2. Surface planing
WARNING! The plane should only be applied to the work-
piece in the switched-on position.
Position the machine with the front section of mobile plate
S over the work-piece. During surface planing (wood beams
and tables etc) mobile plate S and base plate U should
always rest on the entire work surface (danger of blade
repercussion). The blade should be guided with both hands
and moved forward in a uniform fashion over the work
Planes PF110/1100S PF110/2000S
Absorbed power W 1100 2000
No-load speed /min 16000 15000
Cutting depth mm 0-3 0-3,5
Total cut width mm 110 110
Rebate’s depth mm - 16
Approx. weight (without accessories) Kg 4,0 7,3

Product specificaties

Merk: Felisatti
Categorie: Schaafmachine
Model: PF110

Heb je hulp nodig?

Als je hulp nodig hebt met Felisatti PF110 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schaafmachine Felisatti

Felisatti

Felisatti PF110 Handleiding

23 Juli 2023
Felisatti

Felisatti PF102 Handleiding

23 Juli 2023

Handleiding Schaafmachine

Nieuwste handleidingen voor Schaafmachine

Bavaria By Einhell

Bavaria By Einhell BOF 1400 E Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BEH 900 Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BOF 1050 E Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BEH 600 Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BOF 850E Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BMF 1300 Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BEH 750 Handleiding

9 April 2024
Bavaria By Einhell

Bavaria By Einhell BDF 850 Handleiding

9 April 2024
Einhell Bavaria

Einhell Bavaria BEH 600 Handleiding

25 Maart 2024
Einhell Bavaria

Einhell Bavaria BEH 900 Handleiding

25 Maart 2024