Extron TMK 100 AAP Handleiding
Pagina's 2 Engels Niet gecategoriseerd
Bekijk de handleiding van Extron TMK 100 AAP gratis online of download de PDF. Deze handleiding is 32 keer bekeken. Vraag over dit model? Stel een vraag
IMPORTANT:
Go to www.extron.com for the
complete user guide, installation
instructions, and specifications.
TMK Series • Installation Guide
The TMK series Table Mount Kits allow under-table installation for up to two single-space
AAPs (TMK120AAP) or up to three single-space AAPs (TMK130AAP). Both kits secure
to the underside of a table. The kits can also be mounted side-by-side for applications
requiring additional AAP spaces.
NOTE:The location must consider that cables are connected to the AAPs both from
the front and from the rear, and the bracket and AAPs must be readily visible to
prevent accidental contact.
ATTENTION:Do not drill through the table or furniture. If the table is too thin or of a
different material for the supplied screws, use an appropriate type and length.
USB
CHARG
ER
1
Install #6 x 1/2 inch wood screws
into the pilot holes.
Tighten until 1/4 inch protrudes.
Drill 3/32-inch (2.4 mm) diameter,
1/4 inch (6.3 mm) deep pilot
holes.
Mark the four yhole locations at ke
the desired mounting location.
2
4
3
Install AAPs in the faceplate.
(4)
#4 x 1/4" (2)
Sheet Metal Screws
#6 x 1/2" (4)
Wood Screws
Corve
F
aceplate
Included sPart
Mount the TMK bracket as follows:
Product specificaties
| Merk: | Extron |
| Categorie: | Niet gecategoriseerd |
| Model: | TMK 100 AAP |
Heb je hulp nodig?
Als je hulp nodig hebt met Extron TMK 100 AAP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden