Extron TLP Pro 1525TG Handleiding

Bekijk gratis de handleiding van Extron TLP Pro 1525TG (6 pagina’s), behorend tot de categorie Monitor. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.7 sterren uit 8 reviews. Heb je een vraag over Extron TLP Pro 1525TG of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

IMPORTANT:

Go to www.extron.com for the

complete user guide and installation

instructions before connecting the

product to the power source.

TLP Pro 1225TG, 1525TG, and 1725TG • Setup Guide

Overview

The Extron

®

TLP Pro 1225TG, TLP Pro 1525TG, and TLP Pro 1725TG are table-top touchpanels with high resolution capacitive,

edge-to-edge glass touchscreens. The TLP Pro 1225TG has a 12.1 inch screen with a 1280x800 resolution. The TLP Pro 1525TG

has a 15.6 inch screen with a 1366x768 resolution. The TLP Pro 1725TG has a 17.3 inch screen with a 1920x1080 resolution. All

three touchpanels are ideal for any AV applications requiring large touchpanels with exible mounting options and fully customizable

interfaces. This guide provides instructions for experienced installers to mount and install these touchpanels. For more complete

details, see the at TLPPro 1225, 1525, and 1725 Series User Guidewww.extron.com.

Setup Overview and Checklist

Get Ready

Download and install the latest version of the following software:

zGUI Designer — For designing layouts for Extron TouchLink

®

Pro touchpanels and third party touch interfaces

zGlobal Configurator

®

Plus and Professional — For setting up and conguring the control processor and touchpanel

zGlobal Scripter

®

— Provides an integrated development environment for Extron control systems programming. Global

Scripter provides an Extron-exclusive Python

™

library (ControlScript

®

) and Global Scripter modules to get you started.

zToolbelt — For device discovery, device information, rmware updates, and conguration of network settings, system

utilities, and user management for TouchLink Pro devices.

NOTE:All four software programs are available from www.extron.com.

Obtain the following network information from your network administrator:

DHCP status (on or off). If DHCP is off, you also require:

IP addressSubnet maskGateway

Username — This can be either or .adminuser

Passwords — The factory congured passwords for all accounts on this device have been set to the device serial number.

Passwords can be changed during conguration. Passwords are case sensitive.

NOTE:If the device is reset to default settings, the passwords are reset to the default password, which is extron (for

either or ).adminuser

Make a note of the touchpanel MAC address from the label on the back of the device.

Mount and Cable All Devices

ATTENTION:

• Do not power on the touchpanels until you have read the Attention in the Power Supply section of the

TLPPro 1225, 1525, and 1725 Series User Guide.

• Ne branchez pas les écrans tactiles avant d’avoir lu la mise en garde dans la section «sources d’alimentation» du

TLPPro 1225, 1525, and 1725 Series User Guide.

Mount the units. There are several mounting options for TouchLink Pro touchpanels (see on page 2). Mounting

Connect cables to the touchpanels (see on page 4).Rear Panel Features

Connect the touchpanel to a power source. These models can be powered by PoE or by a 12VDC power supply.

The TLP Pro 1725TG ships with the PI 140 power injector. A power injector or 12 VDC power supply must be purchased

separately for the 12-inch and 15-inch models.

An Extron IP Link

®

control processor must be connected to the same Ethernet subnetwork as the touchpanel.

Set up the Touchpanels for Network Communication

Connect the PC that you will use for setup, the control processor, and touchpanel .to the same Ethernet subnetwork

Use the (see page 6) or Toolbelt to set the DHCP status and, if necessary, the IP address, subnet mask, Setup Menu

gateway, and related settings for the touchpanel.

Configure the Touchpanels

Create a graphical user interface with GUI Designer (see for step-by-step instructions).GUI Designer Help File

Associate functions with the graphical user interface features with Global Congurator or Global Scripter.

Product specificaties