Extron FOX USB Extender Plus Handleiding

Bekijk gratis de handleiding van Extron FOX USB Extender Plus (2 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.2 sterren uit 2 reviews. Heb je een vraag over Extron FOX USB Extender Plus of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FOX T/R USB Extender Plus • Setup Guide

The FOX T/R USB Extender Plus is a USB transmitter and receiver pair that extends USB signals

over ber optic cabling. It is compatible with USB 3.0, 2.0, 1.1, and 1.0 devices with transfer

data rates up to 480 Mbps. It features peripheral emulation, an active four-port hub that supplies 5 Volts, 500 mA per port,

and real-time system monitoring. It is also compatible with Extron FOX matrix switchers for signal distribution systems up to

1000x1000 and larger. The FOX T/R USB Extender Plus units are housed in quarter rack wide, 6 inches (15 cm) deep, 1 inch

(2.5 cm) high metal enclosures.

The transmitter and receiver are available in two versions, differentiated by the type of ber optic cable, multimode or singlemode,

that denes their effective range of transmission:

• — Very long distance, up to 30 kilometers (18.6 miles)Singlemode

•— Long distance, up to 2 kilometers (6,561 feet)Multimode

NOTE:The multimode and singlemode units are physically and functionally identical, with the exception of the effective

range of transmission. In this guide, all instructions apply to either transmission mode unless otherwise specified.

This guide provides basic instructions for an experienced installer to set up and operate the ber optic Extron FOX T/R USB

Extender Plus transmitter and receiver.

Installation

WARNING:These units output continuous invisible light, which may be harmful to the eyes. Use with caution. For additional

safety, plug the attached dust caps into the optical transceivers when the ber optic cable is unplugged.

AVERTISSEMENT :Ces unités émettent une lumière invisible en continu (conforme à la classe1) qui peut être dangereux

pour les yeux, à utiliser avec précaution. Branchez la protection contre la poussière dans l’ensemble émetteur/récepteur

lorsque le câble bre optique est débranché.

ATTENTION:

• Installation and service must be performed by authorized personnel only.

• L’installation et l’entretien doivent être effectués uniquement par un électricien qualié.

Connecting Cables

For proper operation, the transmitter, receiver, USB host, and peripherals must be connected properly as shown in gure 1 and

described in the procedure on the next page.

USB

USB

HOST

POWER

1.0A MAX

12V

1

2

3

4

OPTICAL

Rx

Tx

OPTICAL

Rx

Tx

OUTPUTS

POWER

1.0A MAX

12V

Keyboard

INPUT

Host

Computer

Four female USB 2.0 compatible type A

connectors provide +5 VDC at up to

500 mA to connected USB peripherals.

TransmitterReceiver

SM or MM Fiber Cable

Ground

+12 VDC

External

Power Supply

(12 VD 1 A )C,

G

G

Ground

+12 VDC

Exteal rn

Po

wer Supply

(12 VDC,

1 A)

GG

NOTE:

If the USB host is capable of supplying powe a r,

transmitter power supply is not required. The

receiver must have a power supply connected.

AX 50-60Hz

AX 50-60Hz

Figure 1. Connecting Cables for the FOX T/R USB Extender Plus System

1

IMPORTANT:

Go to www.extron.com for the

complete user guide and installation

instructions befor

e connecting the

pr

oduct to the power sour

ce.

Product specificaties