Extech TM55 Handleiding

Extech Voedsel thermometer TM55

Lees hieronder de 📖 handleiding in het Nederlandse voor Extech TM55 (5 pagina's) in de categorie Voedsel thermometer. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

USER GUIDE

Digital Food Thermometer

Model TM55

Introducon

Thank you for selecting the Extech Instruments Model TM55. The TM55 is NFS cered

for measuring the temperature of liquids, pastes, and semi-solids for all-purpose food

checks. The TM55 was designed for use in the food industry, in homes, businesses,

laboratories, agricultural applicaons (for soil), and educaonal facilies. This device is

shipped fully tested and calibrated and, with proper use, will provide years of reliable

service. Please visit our website (www.extech.com) to check for the latest User Guide,

Product Updates, and Support.

Features

 Pocket size, fold-out thermometer

 NSF cered for measuring liquids, pastes, and semi-solid foods

 Probe length ); tapered probe p for easy inserons 2.4” (60 mm

 Splash-proof housing is IP 65 rang

 Ultrasonically welded housing with an-microbial addive

 Automac Power OFF aer 60 minutes

 Built-in magnec strip allows for appliance aachment

 Dishwasher friendly (top rack only!)

2 TM55- _v1.2 3/20 EN

Safety

 Before use please read the enre User Guide carefully

 This product is intended for applicaons described in this User Guide only

 Unauthorized repairs/modicaons/changes to this product are prohibited and

void the warranty

 This instrument is not intended for use in medical applicaons or on medical

devices of any kind

Cauon! Risk of Injury

 Keep this instrument and its baeries out of the reach of children

 Be careful when using the probe. Always store the instrument safely folded.

 Do not place baeries in a re

 Do not short-circuit baeries

 Do not dis-assemble the baeries

 Do not aempt to re- arge the baeries. Risk of explosion! ch

 Baeries can be fatal if swallowed, i swallowed get medical assistance immediately f

 Baeries contain harmful acids. Low baeries should be replaced as soon as

possible to prevent damage caused by leaking baeries

 Wear chemical-resistant gloves and eye protecon when handling leaking baeries

Important informaon on Product safety!

 Do not expose the unit to extreme temperature, vibraon, or shock

 Only the probe can withstand temperature up to 482 oF (250oC) not the instrument

 Never place the probe directly over re

Geng Started

 Using a coin, open the baery compartment by turning the compartment lid to the

le and then remove the insulang strip. Close the compartment aer removing

the insulang strip.

 Remove the protecve display foil.

 Carefully fold out the thermometer probe and the unit is now ready to use.

 The sensor is located at the p of the probe. To measure temperature, insert the

probe into the material under test to a depth of at leas ). t 0.4” (1 cm

 The probe has a rotaonal angle of 180 degrees maximum.

 Switch the instrument power OFF by carefully folding the probe into its storage

posion.

 The instrument will automacally switch OFF aer 60 minutes of inacvity. To

switch the instrument ON, fold the probe in for 4 seconds and then fold out again.

3 TM55- _v1.2 3/20 EN

Baery Replacement

When the low baery icon appear the display the and the icon ERROR on ,

CR2023 baery must be replaced:

 Using a coin, open the baery compartment by turning the compartment lid to

the le

 Remove the old battery and insert new CR2032 with the posive (+) side facing

upward

 Close the baery compartment ghtly by turning the compartment lid to the right

Battery Safety Reminders

 Please dispose of baeries responsibly; observe local, state, and naonal

regulaons.

 Never dispose of baeries in a re; baeries may explode or leak.

Troubleshoong

NO DISPLAY:

Fold the probe in and wait several seconds. Then fold the probe out.

Check for baery and check for proper baery polarity (posive side facing up)

INCORRECT DISPLAY:

Replace baery

Check the posion of the probe; the probe must be inserted into test material to a depth

of at least ) 0.4” (1cm

Care and Maintenance

 Clean the instrument with a damp cloth. Do not use abrasives, solvents, or scouring

agents

 Remove the baery when the instrument is to be stored for long periods

 Keep the instrument in a dry storage location

 To prolong the baery life close (fold in) the probe when not in use

Product specificaties

Merk:	Extech
Categorie:	Voedsel thermometer
Model:	TM55

Heb je hulp nodig?

Als je hulp nodig hebt met Extech TM55 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Voedsel thermometer Extech

Extech TM55 Handleiding

1 Februari 2023

Handleiding Voedsel thermometer

Nieuwste handleidingen voor Voedsel thermometer

TFA 14.1512 Handleiding

9 April 2024

TFA Dostmann 30.1040 Handleiding

26 Maart 2024

GrillEye Max Handleiding

26 Maart 2024

Tepro 8346 Handleiding

26 Maart 2024

Maverick XR-40 Handleiding

26 Maart 2024

TFA Dostmann 30.1018 Handleiding

26 Maart 2024

ETI Thermapen Mk4 Handleiding

21 Februari 2024

Mastrad Meat°it Handleiding

20 Februari 2024

Mastrad M°Classic Handleiding

20 Februari 2024

Tescoma Accura Handleiding

14 Februari 2024