Extech 42545 Handleiding
Extech
Omgevingsthermometer
42545
Bekijk gratis de handleiding van Extech 42545 (10 pagina’s), behorend tot de categorie Omgevingsthermometer. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.1 sterren uit 2.5 reviews. Heb je een vraag over Extech 42545 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/10

User’s Manual
High Temperature InfraRed Thermometer
with Laser Pointer
MODEL 42545

42545A-en-US_V4.5 1/16
2
Introduction
Congratulations on your purchase of the Model 42545 IR Thermometer. The 42545 is capable of
non-contact (infrared) temperature measurements at the touch of a button. The built-in laser pointer
increases target accuracy while the backlit LCD and handy push-buttons combine for convenient,
ergonomic operation. This meter is shipped fully tested and calibrated and, with proper use, will
provide years of reliable service.
Safety
Use extreme caution when the laser pointer beam is on
Do not point the beam toward anyone's eye or allow the beam to
strike the eye from a reflective surface
Do not use the laser near explosive gases or in other potentially
explosive areas
Meter Description
1. Laser pointer beam
2. IR Sensor
3. Measurement Trigger
4. Battery and Switch Compartment
5. LCD Display
6. Push-buttons
7. Handle Grip
8. Temperature Units (ºC/ºF) Switch
9. Test Lock ON/OFF Switch
10. Alarm ON/OFF Switch
Note: There is a tripod mount on the bottom of the handle
1
2
3
4
8
9
10

42545A-en-US_V4.5 1/16
3
Operating Instructions
Basic IR Measurements
1. Hold the meter by its handle and point it toward the surface to be measured.
2. Pull and hold the trigger to turn the meter on and begin testing. The temperature reading, the
flashing ‘SCAN’ icon, the emissivity, and the unit of measure will appear. Note: Replace the 9V
battery if the display does not switch on.
3. Release the Trigger and the reading will hold for approximately 7 seconds (HOLD will appear on
the LCD) after which the meter will automatically shut off. The only exception to this is if the
TEST LOCK switch is set to ON.
Note: Select the temperature units (ºF/ºC) using the top switch inside the battery compartment
Backlight/Laser Pointer
1. While pulling the Trigger, push the backlight/laser button once to turn on the backlight.
2. Press it again to turn on the laser pointer. When the laser is ON the laser icon will appear in
the LCD.
3. Press the laser button to turn the backlight off.
4. Pressing it again turns the laser off.
Note: Backlight and Laser settings will be retained after the meter powers down.
Over-range Indication
If the temperature measurement exceeds the specified temperature range, the thermometer will
display dashes in place of a temperature reading.
High and Low Alarm Feature
The Model 42545 has an alarm feature whereas a High Alarm setting and a Low Alarm setting can
be programmed by the user. When either Alarm point is reached the meter will alert the user via an
audible beep and LCD display icon. Follow the steps below:
1. Press the MODE button until the HAL (High Alarm) parameter is displayed. Use the UP and
DOWN arrow keys to set the desired High Alarm temperature setting.
2. Press the MODE button until the LAL (Low Alarm) parameter is displayed. Use the UP and
DOWN arrow keys to set the desired Low Alarm temperature setting.
3. When an alarm limit is reached, the audible alarm will sound and the display icon HIGH or
LOW will appear on the LCD.
4. Note that if the bottom switch (located in the battery compartment) is set to OFF, the audible
alarm will be disabled.
Product specificaties
Merk: | Extech |
Categorie: | Omgevingsthermometer |
Model: | 42545 |
Heb je hulp nodig?
Als je hulp nodig hebt met Extech 42545 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Omgevingsthermometer Extech
1 Mei 2025
1 Mei 2025
6 December 2023
9 Mei 2023
7 Mei 2023
4 Mei 2023
24 April 2023
23 April 2023
10 April 2023
29 Maart 2023
Handleiding Omgevingsthermometer
- Hama
- Ryobi
- Laserliner
- Techno Line
- TFA
- EMOS
- Velleman
- Milwaukee
- Reer
- AcuRite
- La Crosse Technology
- Uni-T
- Sencor
- Oregon Scientific
- Fluke
Nieuwste handleidingen voor Omgevingsthermometer
18 November 2024
18 November 2024
18 November 2024
18 November 2024
4 Januari 2024
3 Januari 2024
19 December 2023
12 Augustus 2023
18 Juni 2023
10 Juni 2023