EXSYS EX-62035M-SFP Handleiding

Bekijk gratis de handleiding van EXSYS EX-62035M-SFP (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over EXSYS EX-62035M-SFP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Redundant power supply possible to reduce operational failure.

ATTENTION!

Please pay attention to the correct polarity!

Never connect the power supply to the terminal block

while it is switched on!

Never connect the negative terminal to the earth of the

unit. (EGND)

6

5

1

AUFBAU

CONNECTORS & STATUS LEDHARDWAREINSTALLATION

Switzerland:

EXSYS Vertriebs GmbH

Dübendorfstrasse 17

8602 Wangen

www.exsys.ch

Germany:

EXSYS Vertriebs GmbH

Industriestrasse 8

61449 Steinbach

www.exsys.de

Italy:

EXSYS Italia Srl

Via Belvedere, 45/B

I22100 Como -

www.exsys.it

Anleitun

E62035MSF

Der wohl kleinste industrietaugliche 10Port Gigabit WebManaged Switch EXSFP ---62035M-

bietet trotz seiner geringen Aussenmaße volle Gigabit Leistung an allen Ports. Die beiden SFP-

Slots ermöglichen die Einbindung in ein GlasfaserNetzwerk. Passende SFPTransceiver sind --

als Zubehör erhältlich. Dank dem robusten Metallgehäuse und dem erweiterten

Betriebstemperaturbereich von 40°C bis 80°C ist er für eine Vielzahl von Anwendungen auch in -

rauen Umgebungen geeignet. Die Stromversorgung erfolgt über den Terminal Block (12-

48VDC) und kann zur Verminderungen von Betriebsausfällen auch redundant erfolgen.

Kompatibilität:Gigabit Ethernet 10/100/1000BaseT-

Betriebssysteme:Alle Betriebssysteme

Anschlüsse:8x RJ45Buchse, 2SFPSlot1x Terminal Block 1248VDC-x -, -

Lieferumfang:SFP, DINRail Kit, Wandmontagehalterung, EX-62035M--

Anleitung

12--48V TBlock für optional

erhältliches Netzteil

Status LEDs8x RJ45

100/1000 Mbit/s

2x SFP Slot

100/1000 Mbit/s

Status LEDs

12V to 48V TBlock:-

RJ45 Port:

Switch off the power supply before disconnecting modules or wires.

The propper power supply voltage is indicated on the product label. Check the voltage of your

power source to ensure you are using the correct voltage. use a voltage higher than DO NOT

what is specified on the product.

SFP Transceivers are a Class 1 Laser/LED product.

To avoid causing serious damage to your eyes, do not stare directly into the

laser beam.

NOTICE & CLEANING

Please read the following installation instructions.

1.62035M-Install the EX-- SFP on a mounting rail using the DINRail kit.

2. If required, insert optional SFP transceivers into the SFP slots.

3. Connect your network devices to the switch using a network cable.

4.If required, connect the fiber optic cable for the connection to the media converter or switch

to the SFP transceiver(s) used.

CAUTION! Do not look directly into the laser beam of the fiber optic connector!

5.Connect the power connector of the optionally available power supply to the terminal block

and switch on the power supply.

6.After the power is turned on, the PWR indicator lights up. If the indicator does not light up,

check that it is connected to the power supply correctly.

7.When all cables are connected correctly, the indicators light up according to the port status

of the LEDs (page 5).

SFP slot:

ATTENTION!

SFP Transceivers are a Class 1 Laser/LED product.

To avoid causing serious damage to your eyes, do not

stare directly into the laser beam.

Link / Activity LED

PoE LED

Status LEDs:

LED NameColorLED Function

Link (ACT)Yellow

On:Linked

Flashing:Data Transmission

Speed (SPD)Green

On:1000 Mbit/s

Off:10/100 Mbit/s

FX 9+10

Green

On:Fiber linked

Flashing:Data Transmission

SYSGreen

Flashing:System is running

Off:System failure / Switch off

PWRGreen

On:Switch is powered

Off:No power supply connected

FX 10 LED

To clean the device, please use only a dry, nonfibrous cloth and remove the dirt with light -

pressure. In the area of the connections, please make sure that no fibers of the cloth are left in

the socket.

Attention! Never use a moist or wet cloth for cleaning!

PWR LED

FX 9 LED

SYS LED

87654321

RJ45 Port

PinSignalPinSignalPinSignal

1BI_DA+4BI_DC+7BI_DD+

2BI_DA5BI_DC8BI_DD- - -

3BI_DB+6BI_DB -

BESCHREIBUNG & TECHNISCHE DATEN

MANAGEMENT

Make sure that the IP addresses of the switch and the PC are in the same network segment to

access the switch via the web. The default IP address of the switch is .192.168.1.6

Open your browser, type the switch's IP address 192.168.1.6 in the address bar and press

'Enter'.

In the user login popup window, enter the following username and password.-

Username:admin

Password:admin

After confirming your login, you will be taken to the main page of the switch, where you can

change the settings to suit your needs.

≠

V-

V -V+V -V+

Product specificaties