EXSYS EX-11224HMVS Handleiding

EXSYS USB Hub EX-11224HMVS

Bekijk gratis de handleiding van EXSYS EX-11224HMVS (2 pagina’s), behorend tot de categorie USB Hub. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.9 sterren uit 3 reviews. Heb je een vraag over EXSYS EX-11224HMVS of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
6 5 1
BESCHREIBUNG & TECHNISCHE DATEN
AUFBAU
Anleitun
Vers. 1.0 / 20.09.22
E 11224HMV
Kompatibilität: USB 1.1, 2.0 & 3.2
Betriebssysteme: Alle Betriebssysteme
- - - 1x DC Buchse 9 40V, 1x Terminal Block 9 40V
Lieferumfang: 11224HMVS, USB 3.2 Gen 1 Kabel, DIN Rail Kit, EX- -
Wandmontagehalterung, Anleitung
Zertifikate:
1x USB 3.2 Gen 1
Upstream B Buchse -
4x USB 3.2 Gen 1
Downstream A Buchse -
Betriebs LED
9 40V DC Buchse für - -
optional erhältliches
Netzteil
9 40V T Block für optional - -
erhältliches Netzteil
HARDWARE INSTALLATION
DRIVER INSTALLATION
Because there are large differences between PC s, we can give you only a general installation
guide for the EX 11224HMVS. Please refer your computer s reference manual whenever in -
doubt.
1. - -Install the EX 11224HMVS on a mounting rail by using the DIN Rail Kit or on the wall using
the Wall Mounting Brackets.
2. - -Connect the USB 3.2 Gen 1 cable with the USB 3.2 Gen 1 Upstream B Port at the EX
11224HMVS.
3. Now connect the power connector of the optionally available power supply to the DC-
Connector or to the Terminal Block of the hub and insert the power plug of the power
supply into an electrical outlet.
4. - -Now connect the other end from the USB 3.2 Gen 1 cable (A Plug) to the USB A Port at
your PC.
All Operating Systems
After the hardware installation the Operating System will recognize the EX 11224HMVS auto--
matically and install the drivers.
CHECK INSTALLED DRIVER
Open the > <. Now you should see at the following new Device manager USB Controller-
entry:
If you see this or a similar information the hub is installed correctly.
CONNECTORS
Der robuste und industrietaugliche EX 11224HMVS USB Hub im Metallgehäuse ist mit vier - -
USB A 3.2 Gen 1 Buchsen ausgestattet. Er unterstützt alle USB Anschlüsse von 1.1 bis 3.2. - -
Jede USB Buchse an der EX 11224HMVS ist zusätzlich verschraubbar. Durch die Stromversor-- -
gung über die DC Buchse oder den Terminal Block können an jedem USB Port 1,1A zur Verfü-- -
gung gestellt werden. Dies ermöglicht Ihnen ein problemloses aufladen von iPhone, iPad,
Smartphone und Tablet. Der USB 3.2 Bus unterstützt optimal die Leistung des schnellen VIA
Chipsatz. Der EX 11224HMVS gewährleistet so eine sichere Datenübertragung und exzellente -
Performance von bis zu 5Gbit/s. Er unterstützt den Self Powered und USB Bus Powered - - -
Modus. Zusätzlich ist der EX 11224HMVS mit einem 15KV ESD Überspannungsschutz ausge--
stattet Der EX 11224HMVS unterstützt die Norm IP30. Im Lieferumfang ist ein DIN Rail Kit für . - -
die Installation auf einer Tragschiene und Wandmontagehalterungen für eine Montage an eine
Wand enthalten. Das DIN Rail Kit wird mit zwei Schrauben auf der Rückseite festgeschraubt. -
Die Wandmontagehalterungen können ohne Schrauben an den Seiten des EX 11224HMVS -
befestigt werden.
Switzerland:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
9V to 40V DC Connector:-
It is not necessary to pay attention to the polarity.
ATTENTION!
Only for use with optionally available power supply or
other compliant power supply!
9V to 40V T Block:-
It is not necessary to pay attention to the polarity.
ATTENTION!
Never connect the power supply to the terminal block
while it is switched on!
Mounting of the DIN Rail Kit with -
two screws on the rear side
Mounting the Wall Mounting Bracket
on the sides
Attention!
Never plug in with
force or in wrong
direction.
USB 3.2 Gen 1 B Port:-
StdB_SST
StdB_SST
D-
GN
StdB_SSTX
GND_DRAI
StdB_SST
D+
VBus
Attention!
Never plug in with
force or in wrong
direction.
USB 3.2 Gen 1 A Port:-
D+ D-
StdB_SSTX+
StdB_SSTX -
StdB_SSTX+
StdB_SSTX -
GND_DRAIN
GND VCC
Status LED for
each Port
-
+
+V - V
or
-
+
- V +V
or
2 3
4
HARDWARE INSTALLATION
TREIBER INSTALLATION
Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen
PCs gibt, können wir Ihnen nur eine generelle Anleitung zum Anschluss des EX 11224HMVS -
geben. Bei Unklarheiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersys-
tems.
1. - -Installieren Sie den EX 11224HMVS mit dem DIN Rail Kit auf eine Tragschiene oder mit
den Wandmontagehalterungen an die Wand.
2. Verbinden Sie das mitgelieferte USB 3.2 Gen 1 Kabel mit dem USB 3.2 Gen 1 Upstream
B Anschluss des Hubs.-
3. Schließen Sie jetzt den Stromanschluss des optional erhältlichem Netzteils an die DC-
Buchse oder an den Terminal Block des Hubs an und stecken Sie den Netzsteckers des
Netzteils in eine Steckdose.
4. Verbinden Sie nun das andere Ende (A Anschluss) des mitgelieferten USB 3.2 Gen 1 -
Kabels mit der USB A Buchse an Ihrem PC.-
Alle Betriebssysteme
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem den EX 11224HMVS -
automatisch und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den . Jetzt müssten Sie unter folgende >Geräte Manager<- USB Controller-
Einträge sehen:
Ist dieser oder ein ähnlicher Eintrag vorhanden, ist der USB Hub richtig installiert.
ANSCHLÜSSE
9V bis 40V DC Buchse:-
Auf die Polarität muss nicht geachtet werden.
ACHTUNG!
Nur zur Verwendung mit optional erhältlichem oder
einem anderem konformen Netzteil!
Montage des DIN Rail Kit mit -
zwei Schrauben an der Rückseite
Montage der Wandmontagehalterung
an den Seiten
DESCRIPTION & TECNICAL INFORMATION
LAYOUT
Manua
Vers. 1.0 / 20.09.22
E 11224HMV
Compatibility: USB 1.1, 2.0 & 3.2
Operating System: All Operating Systems
Connectors: 4x USB 3.2 Gen 1 A Port, 1x USB 3.2 Gen 1 B Port, - -
- - - 1x DC Connector 9 40V, 1x Terminal Block 9 40V
Extent of Delivery: 11224HMVS, USB 3.2 Gen 1 Cable, DIN Rail Kit, EX- -
Wall Mounting Brackets, Manual
Certificates:
-
+
9V bis 40V T Block:-
Auf die Polarität muss nicht geachtet werden.
ACHTUNG!
Netzteil nie eingeschaltet mit dem Terminal Block
verbinden!
+V - V
Schweiz:
EXSYS Vertriebs GmbH
Dübendorfstrasse 17
8602 Wangen
www.exsys.ch
Deutschland:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de
The rugged and industrial grade EX 11224HMVS USB hub in metal housing is equipped with -
four USB A 3.2 Gen 1 ports. It supports all USB ports from 1.1 to 3.2 and can provide 1,1A to -
each USB port by powering via DC Connector or Terminal Block. This allows you to charge -
iPhone, iPad, smartphone and tablet without any problems. Each USB port on the EX-
11224HMVS is additionally screwable. The USB 3.2 bus optimally supports the performance of
the fast VIA chipset. The EX 11224HMVS thus ensures secure data transfer and excellent -
performance of up to 5Gbps. The EX 11224HMVS support the Self Powered and USB Bus- - - -
Powered mode. In addition, the EX 11224HMVS is equipped with a 15KV ESD surge protec--
tion. The EX-11224HMVS supports IP30 standard and comes with a DIN Rail kit for installation -
on a DIN Rail and Wall Mounting Brackets for a mounting on a wall. The DIN Rail Kit is screwed - -
tight with two screws on the back. The Wall Mounting Brackets can be attached to the sides of
the EX 11224HMVS without screws.-
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
USB 3.2 Gen 1 B Buchse:-
StdB_SST StdB_SST
D-
GN
StdB_SSTX
GND_DRAI
StdB_SST
D+
VBus
Achtung!
Stecker niemals
umgekehrt oder mit
Gewalt einstecken.
USB 3.2 Gen 1 A Buchse:-
D+ D-
StdB_SSTX+
StdB_SSTX -
StdB_SSTX+
StdB_SSTX -
GND_DRAIN
GND VCC
1x USB 3.2 Gen 1
Upstream B Port-
4x USB 3.2 Gen 1
Downstream A Port -
Power LED
9 40V DC Connector - -
for optional
Power Supply
9 40V T Block for optional - -
Power Supply
Status LED für
jeden Port
oder
-
+
- V +V
oder


Product specificaties

Merk: EXSYS
Categorie: USB Hub
Model: EX-11224HMVS

Heb je hulp nodig?

Als je hulp nodig hebt met EXSYS EX-11224HMVS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden