EverFocus EZA2880 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor EverFocus EZA2880 (7 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
EZA2880 eZ.HD Series
8MP IP6 Dual Power 6 C IR Bullet amera
Users Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2020
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
1
1. Introduction
Equipped with a 8MP CMOS sensor, the deliverEZA 2880 8MP image quality.
The model provides 6-11motorized 3. mm lens with ICR. Featured with True
Wide Dynamic Range (T-WDR), the camera can provide clear images even
under backlight circumstances where intensity of illumination can vary
excessively. The EZA s 2880 support dual power (12VDC / 24VAC, depends on
model) and supports both NTSC and PAL scanning systems . (auto detection)
1.1 Packing List
Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1
Screw & Screw Anchor x 3
User Manual x 1
1.2 Features
8MP CMOS sensor, delivering amazing high sensitivity
Motorized 6-11 3. mm lens with ICR to capture the desired field of view
Extended IR range of up to 40m / 131ft. with 4 LEDs (depends on scene
IR reflectivity)
T-WDR to improve the visibility under high contrast scene
3-Axis rotation design allows wall or ceiling mounting
IP66-rated with metal housing
Supports dual power (12VDC / 24VAC, depends on model)
Supports UTC function: Control camera OSD settings directly from DVR
end
1.3 Dimensions
128mm / 5"
280mm / 11"
91.5mm /3.6"
84mm / 3.31"
2
1.4 Optional Accessory
BA- E320
Color: White
Size (Φ x x H): 138 x 54mm / 5.43” 2.16”
Weight: 700g / 1.87
Material: Metal
1.5 Cable Description
12VDC or 24VAC Power Cable
Video Output Cable (BNC, 75Ohm)
2. Installation
1. Stick the supplied Mounting Sticker 3 to the surface to mark the screw
positions. Drill 3 holes on the surface and insert the supplied 3 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 3 screw area.
2. To mount the camera to the surface, screw the Camera Base to the surface
using the supplied 3 Screws.
Mounting
Surface
Screws Screw Anchors
Camera Base
3. 12VDC / 24VAC Connect the Power Cable a to power source. Connect the
V Oideo utput Cable a . to monitor or DVR
4. You can use the Joystick . on the cable to OSD configure camera settings
Remove the Protection Cap from the Joystick before using it.


Product specificaties

Merk: EverFocus
Categorie: Bewakingscamera
Model: EZA2880

Heb je hulp nodig?

Als je hulp nodig hebt met EverFocus EZA2880 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera EverFocus

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera