EtherWAN EX83304 Handleiding

Bekijk gratis de handleiding van EtherWAN EX83304 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over EtherWAN EX83304 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

W70G-EX83304Q2 Page 1

Installation Guide

EX83304 Series | Hardened Managed Ethernet Switch

Copyright 2022 EtherWAN Systems, Inc.All Rights Reserved 12/05/2022

1Unpacking

Open the carton and unpack the items. Your package

should include:

▪One EX83304 switch

▪One console cable

If any items are missing or damaged, notify your

EtherWAN representative. If possible, save the carton

and packing material in case you need to ship or store

the switch in the future.

2Equipment Needed

▪Shielded twisted pair cables and corresponding

shielded RJ45 connectors

▪Appropriate SFP modules for SFP ports

▪Personal computer with a DB9 straight cable (if

switch is to be managed through console port)

3Select a Location

▪Installations: DIN-Rail mount, wall (in an enclosure

or industrial panel)

▪Identify a power source within 6 feet (1.8 meters).

▪Choose a dry area with ambient temperature

between -40 and 75ºC (-40 and 167ºF).

▪Be sure there is adequate airflow.

4 Connect to the Data Ports

Depending on the model, your switch can have the

following ports:

▪12 or 8 10/100BASE-TX ports

▪2 or 4 Gigabit SFP slots

10/100BASE-TX Ports

These ports come in 10/100Base-TX interfaces. They

can connect to devices such as an IP surveillance

camera or a Voice Over Internet Protocol (VoIP)

phone.

1 Gbps SFP Ports

Your switch model has four 1 Gbps SFP slots. SFP

transceivers can be installed directly into ports 13 –

16. Ensure that the same type of transceiver is used at

both ends of the link and that the correct type of fiber

cable is used.

5Apply Power

The switch has two pairs of power inputs:

A 12-48 VDC terminal block

The power dissipation under full load is as follows:

12V/1.44A 24V/0.67A 48V/0.33A

Redundant power supply is supported. However, only

one power input is required to operate the switch.

Note: Use qualified power supply by SELV or double

insulation of UL60950 or UL61010-1 or UL61010-2-201

standards.

Terminal Block

The switch provides two power inputs on a 12-48VDC

terminal block. Only one power input is required to

operate the switch. The terminal block has 5 terminal

posts.

Pin

State

Description

Power 1

+

12-48VDC

-

Power Ground

Power 2

+

12-48VDC

-

Power Ground

Earth Terminal

Relay Output Rating

0.6A @ 30VDC

Product specificaties