EStar Marcopolo-52 HD FPV Handleiding
Pagina's 98 Drone
Bekijk de handleiding van EStar Marcopolo-52 HD FPV gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
1
EN
MARCOPOLO DRONE
USER MANUAL
Thank you for purchasing eSTAR product.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USE
For detailed information please visit www.estar.eu
MAIN TECHNICAL DATA AND FEATURES:
• The Product is made of highly durable plastic materials
• 4 Axis construction with 6 Axis Gyro Stabilizer enables precise ight positioning
• Ease of use by selecting the ight speed
• Headless mode and Return to Home functions
• 2.4Ghz Radio Remote Control
• Wi HD Camera Live transmission and recording
• 360 degree 3D overturning
The Manufacturer reserves the right to alternate the parameters/functions without the prior written notice.
WARNING TO AVOID DAMAGES:
• USE ONLY ORIGINAL SPARE PARTS;
• DO NOT DISSASEMBLE THE PRODUCT;
• INNER PARTS CAN BE REPAIRED ONLY BY SERVICE CENTER. PLEASE CONTACT QUALIFIED;
• SERVICE PARTNERS IN YOUR COUNTRY.
Size520x520x200mm
Recommended eld of use:Outdoor
Recommended user age14+ years
Maximum ight control range100-120m
Maximum Wi FPV Camera range20-25m
Battery:7,4V LiPo 1600mAh
Flight time6-8 min
Weight550g
BATTERY SAFETY NOTES
• Danger of re and explosion occurs if a battery is not connected properly.
• Always charge LiPo batteries under supervision.
• Always use ONLY the original LiPo - battery
• Please stop charging if you notice a deformation or if the battery is blowing up!
• Do not shortcut, never throw into re!
• Do not use if the battery deforms, discolors or softens
• Store the battery at temperatures between 10° and 30° at dry and dark places.
• Avoid heating over 50°C at charge or discharge
• The recommended charging capacity - min. 80%,
• Never exhaust the battery
• Store away from children and pets
• Keep away from re, water, heating sources and foreign materials that can cause a
shortcut
• Always use the original charger which is placed on a reproof surface
• Avoid mechanical exposure and do not open
• Do not touch the battery if gas or liquid leaks out of the battery
• Improper handling may result into health problems
• Dispose wasted batteries properly
BATTERY DISPOSAL SYMBOL
This symbol is marked on a product or packaging, it means that the product including the batteries must not be disposed of with your general household
waste. Only discard electrical/electronic items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your
co-operation is vital to ensure the protection of the environment.
PROPELLER
BA
ROTATION
APK for AndriodAPK for Apple
EN
GENERAL PACKAGE CONTENTS
REMOTE CONTROL UNIT BATTERY INSTALLATION (3)
AIRCRAFT INSTRUCTIONS (1)
REMOTE CONTROL UNIT (RCU) FUNCTIONS (2)
GENERAL SAFETY NOTES
• USE ONLY ORIGINAL SPARE PARTS;
This Aircraft is very powerful, please use the throttle stick gently especially for the rst ight.
Fly only in the safe areas away from the other people and obstacles.
FLY the drone only in the Line of sight, always ensuring the controlled returning back possibility
DO NOT y during windy conditions, limited visibility
DO NOT y over crowds, high trees, buildings, electric Power Lines and the other danger areas
The manufacturer is not responsible to any accident, damages, injuries and other direct or indirect losses originating from the error of the Pilot, collision, radio interference or
the other improper use during operation.
For the better rst experience satisfaction it is strongly recommended to obtain the assistance of experienced pilot.
The operating temperature range of the product is from +150C to +300C.
Please switch o the power of the aircraft and the Remote Control Unit when not in use.
Keep the product in a cool and dry place, away from the liquids and heat sources.
1. Drone base housing with propeller blades assembled.
2. 1600mAh LiPolymer battery
3. Wi Camera
4. USB charger
5. Remote control Unit (batteries are not included)
6. Protective frames, 4pcs.
7. Landing foot, 4 pcs
8. Propeller blades, 4 pcs.
9. Screwdriver and the set of screws
10. Memory card reader
11. Mobile phone holder
1. Protective frame
2. Motor
3. Propeller blade
4. 4 axis cover
5. 4 axis base
1. Antenna
2. Speed button
3. Flip button
4. Up/down and turn left-right Joystick
5. Forward / backward, left / right Joystick
6. Headless mode button
7. Left-right side trim button
8. Forward / backward trim button
9. Left/right turn trim
10. Power switch
11. Return Home button
12. LCD light
Please use 4 AA type batteries (not included)
Step 1: Open the battery cover on the back of the RCU
Step 2: Put inside 4 AA type batteries, following the + and – polarity signs as marked. In the battery place and pictures
WARNING!
• Install the batteries with correct polarity
• DO NOT mix old and new batteries
• DO NOT mix dierent types of the batteries
3
REMOTE CONTROL UNIT LCD indications (4)
1. Turn Left/right trim - in the middle position by default
2. Forward / backward trim - in the middle position by default
3. Fly Left/right trim - in the middle position by default
4. Forward power indicator – w
5. Backward power indicator - at the lowest level in the center by default
6. Right sideward y indicator - at the lowest level in the center by default
7. Left sideward y indicator - at the lowest level in the center by default
8. 9. Turn left/right indicator, at the lowest level in the center by default
10. High-low speed indicator H=high, L=Low
11. Battery power level indicator
12. Signal level indicator
RECHARGING OF LITIUM POLYMER BATTERY (5)
Please read the safety notes for the battery rst!
Please connect the USB charger cable to the battery charging port.
Further the USB charger should be connected to the USB port of the computer or AC
USB charger.
The green blinking light shows the battery is charging. When the light is constantly
on, the battery is charged in full.
Please note the USB port or USB charger should support the current not less than
1.5A.
The charging time may take 300 mins.
Step 1 (7)
Install the battery in the drone’s battery compartment, as shown on picture.
Connect the battery cable to the drone power cable with black/red connector.
• Improper handling may result into health problems
• Dispose wasted batteries properly
Place the drone on the at surface. Turn on the power switch on the drone.
The lights of the drone will start ashing.
Step 2. (8)
Lower the throttle stick to the lowest position, then turn on the remote controller.
Turn the throttle stick shortly up/down.
Wait until the RCU indicator and the drone lights stop ashing, then the drone is ready to y.
PREPARATION FOR THE FLIGHT
BINDING OF RADIO TRANSMITTER AND RECEIVER (6)
FLIGHT SETTING AND ADJUSTMENTS (11)
Practice simulation before actual ying
1. Please practice with the RCU joysticks and buttons until you will get used to the
Remote Controller.
2. Put the aircraft in the open space, 2-3 meters in front of you, the red lights mark the
front of the drone.
3. Exercise the joystick functions without turning on the RCU, then practice the hovering
function and adjusting the trim of the drone rst, see instructions further.
Hovering means keeping the drone in the mid-air, xed position.
Step 3. (9)
When ying is nished, turn o the drone power switch. It is also recommended to disconnect
The battery power cable when not in use for a longer period to have a longer battery life.
Step 4. Turn o the RCU power. (10)
If the drone is not used for the longer period, it is recommended to remove the batteries from RCU.
AUTOMATIC CALIBRATION: (12)
It is recommended to set the drone into “calibration” mode before ying, so all settings will be restored as factory settings with automatic ne-
tuning.
Procedure : place the drone on the at horizontal surface, turn on the drone and proceed binding , then simultaneously move the left and right
joysticks to the lower right corner position and hold for few seconds until the lights of the drone will stop ashing. The drone is ready to operate
now.
Product specificaties
| Merk: | EStar |
| Categorie: | Drone |
| Model: | Marcopolo-52 HD FPV |
| Kleur van het product: | Black, White |
| Gewicht: | 545 g |
| Breedte: | 521 mm |
| Diepte: | 521 mm |
| Hoogte: | 200 mm |
| Gebruikershandleiding: | Ja |
| Materiaal behuizing: | Acrylonitrile butadiene styrene (ABS), Polypropylene (PP) |
| Aantal snelheden: | 3 |
| Oplader: | Ja |
| Oplaadtijd: | 180 min |
| Capaciteit van de accu/batterij: | 1600 mAh |
| Gyroscoop: | Ja |
| GPS: | Ja |
| Ondersteunde video-modi: | 720p |
| Field of view (FOV) hoek: | 140 ° |
| Compatibele geheugenkaarten: | MicroSD (TransFlash) |
| Accu/Batterij voltage: | 7.4 V |
| Ondersteund aantal accu's/batterijen: | 1 |
| Aantal USB-aansluitingen: | 1 |
| Certificering: | CE |
| Maximale videoresolutie: | 1366 x 768 Pixels |
| Videoresoluties: | 1280 x 720,1366 x 768 Pixels |
| Type processor: | Nee |
| Geheugenkaart slot(s): | Ja |
| Backlight: | Ja |
| Gebruiksvriendelijk: | Ja |
| Frequentie: | 2400 MHz |
| Maximale afstand: | 150 m |
| Compatibele batterij grootte: | AA |
| Afstandsbediening inbegrepen: | Ja |
| Wifi: | Ja |
| Batterijtechnologie: | Lithium-Polymeer (LiPo) |
| Type motor: | Borstelloos |
| Aantal batterijen (transmitter): | 4 |
| Aantal propellers: | 4 propellers |
| Aantal propellerbladen: | 2 |
| Maximale tilt-hoek: | 360 ° |
| Maximale vliegtijd: | 9 min |
| Aantal assen: | 6 |
| Bewegingsfuncties: | Backward, Downward, Flying sideways, Forward, Turn left, Turn right, Upward |
| Houder voor mobiel apparaat: | Ja |
| Accutechnologie transmitter: | Alkaline |
| Aantal kanalen zender: | 4 |
| Naar Huis-functie: | Ja |
| Functie voor automatisch terugkeren: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met EStar Marcopolo-52 HD FPV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden