Erica Synths Black Double Bass Handleiding

Bekijk gratis de handleiding van Erica Synths Black Double Bass (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 76 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Erica Synths Black Double Bass of wil je andere gebruikers van dit product iets vragen? Stel een vraag

THANK YOU FOR PURCHASING ERICA SYNTHS

BLACK SERIES MODULE!

Erica Black Series include high-end, unique functionality and

superior quality modules. Only the best, highest quality compo-

nents are used, all inputs and outputs are protected against

undesired overvoltage. When designing Black Series, we put

design and usability superior. Big knobs are assigned to key

functions of the module, which makes Black Series ideal for live

performances. Enjoy!

Erica Synths Black Double Bass is unique module that combines

two transistor suboscillators (-1 and -2 octaves) and lowpass

filter. It will turn any VCO or beeper into massive bass sound with

CV control over octave mix and cuto frequency. Sync input that

resets suboscillators on incoming pulse, provides even more

versatility in sound design. The module can be also provide

aggressive distortion, when used with percussive sounds like

bassdrums.

FEATURES:

Two transistor based -1 and -2 octaves suboscillators

Manually and CV controlled fade between suboscillators

Manually and CV controlled lowpass VCF

Suboscillator synchronisation input

Individual outputs of suboscillators

Limiter on the output to avoid clipping

Signal Thru output

CV level attenuators

SPECS:

Audio input level …………..………-5V - +5V

CV level (full sweep)…….……....-5V - +5V

Power consumption…..............+50mA, -39mA

Module width……………….....……10HP

Module depth………………..……..35mm

CLR CVSBMIX CVSYNC INOUT

-1 OUTTHRUIN-2 OUT

BLACK DOUBLE BASS

SUBMIX CV LVL

SUBMIX

COLOUR CV LVL

DRY/WET

COLOUR

-1 OCT-2 OCT

Use this knob to control the mix

between the suboscillators.

CCW setting is -2 octaves

suboscillator, CW setting is -1

octave suboscillator. SUBMIX

CV is added to the SUBMIX

knob setting

This is lowpass VCF cuto

manual control knob. Non

resonant lowpass VCF is

in series with

suboscillators, so you can

control the harmonic

content of the output

signal. Full CW setting

leaves the VCF fully open.

CLR CV is added to the

COLOUR knob setting

This is Colour CV

(VCF cuto frequency)

attenuator

These are dedicated -1

and -2 octave

suboscillator outputs. Try

to run those through two

VCAs controlled by EGs

that receive gates from

two sequencers or two

channels of the same

sequencer. This way

you’ll get two basslines

that are perfectly in tune,

but have dierent

rhythmic patterns

This is the main output of

the module – the sum of

suboscillators and the

VCF

This is the VCF cuto CV

input

This is Submix CV attenuator

This is manual Dry/Wet

control, where Dry is the

original audio signal, Wet is

the sum of suboscillators

and lowpass VCF.

This is audio thru output.

Basically, it copies the input

signal and buers it.

This is audio input of the

module. Experiment with

dierent waveforms and

percussive sounds and see,

how the module reacts!

This is suboscillator

synchronisation input. The rising

edge of the incoming signal will

reset the suboscillator cycle.

Experiment with the frequency

of a sync oscillator and find the

sweet spots!

This is suboscillator mix CV

input

DOUBLE BASS

Product specificaties