Erica Synths Black 3109 VCF/VCA Handleiding

Erica Synths Niet gecategoriseerd Black 3109 VCF/VCA

Lees hieronder de 📖 handleiding in het Nederlandse voor Erica Synths Black 3109 VCF/VCA (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

BLACK 3109 VCF/VCA

THANK YOU FOR PURCHASING THIS

ERICA SYNTHS BLACK SERIES MODULE!

The Erica Black Series includes high-end modules with unique functionality

and superior build quality. Only the best, highest quality components are used,

all inputs and outputs are protected against undesired overvoltage. When

designing the Black Series, we placed an emphasis on usability with the goal

of providing an enjoyable user experience. Big knobs are assigned to functions

that make dierences in sound. The Erica Black Series consists of a range of

modules that are needed to put together an entire synth. Enjoy!

The Erica Synths Black 3109 VCF/VCA is a lowpass ﬁlter and voltage-con-

trolled ampliﬁer combo built around the AS3109 VCF integrated circuit, a

contemporary version of the IR3109 chip, found on vintage Roland synths

such as the Jupiter series, Juno series and the SH-101. The 3109 VCF/VCA is our

attempt to recreate the iconic sound of these synths, but we also aim to

improve upon it. Filters based on IR3109 had several drawbacks, including

a volume drop when the resonance is increased so we added a volume drop

compensation as well as a built-in VCA for more versatility in compact setups.

Additionally, 1V/oct tuning is implemented so you can use this module for

perfect VCF keyboard tracking and also as a VCO.

FEATURES:

24dB/oct lowpass VCF

Volume drop compensation

Built-in VCA

Cuto level attenuverter

1V/oct tracking

SPECS:

Audio level 10Vptp

Cuto CV level (full span) -5V - +5V

VCA CV level 0 - +10V

Max power consumption 25mA@+12V, 25mA@-12V

Module width 10HP

Module depth 35mm

OUTPUTVCA CV INVCF CV ININPUT

CV2

CUTOFF

BLACK 3109 VCF/VCA

OFF

VOL COMP

AUDIO LVL RESONANCE

VCF CV1 LVL VCA CV LVL

CUTOFF

This is the manual cuto control. An external CV is added

to the knob position.

CV2

This is the second cuto CV input. It applies the CV

without attenuation, therefore here you can connect the

CV for 1V/oct tracking.

VOL COMP

This is the volume drop compensation switch. When it is

ON, the volume will not drop when resonance is increased.

AUDIO LVL

This is the audio signal level attenuator.

RESONANCE

This is the resonance control. In “classic” mode (VOL COMP

switch set to OFF), the volume will drop slightly when the

resonance is increased. If you set the VCF to self-oscillate

and apply 1V/oct CV, you can use the module as a VCO. It

works particularly well as bass drum synthesizer when

punchy envelopes are applied to the CV input.

VCF CV1 LVL

This is the cuto CV attenuverter. At 12:00 no CV is applied,

turning the knob clockwise increases the CV amount,

turning it counter-clockwise, the incoming CV is inverted.

VCA CV LVL

This is the VCA CV attenuator. If nothing is patched

into VCA CV IN, it acts as VCA bias control – you need

to dial it all way clockwise in order to open the VCA.

VCF CV IN

This is the cuto CV input with the attenuverter.

OUTPUT

This is the audio output.

VCA CV IN

This is the VCA CV input. Please, note that the input is

normalled to +10V and you need a 0 - +10V envelope to

fully open the VCA.

INPUT

This is the audio input of the module.

Transport the instrument carefully, never let it drop or fall

over. Warranty does not apply to modules with visual

damages.

The module has to be shipped in the original packaging

only. Any module shipped to us for return, exchange and/or

warranty repair has to be in its original packaging. All other

deliveries will be rejected and returned to you. Make sure

you keep the original packaging and technical documentation.

This device complies to the EU guidelines and is manufac-

tured RoHS conforming without use of lead, mercury,

cadmium and chrome. Nevertheless, this device is special

waste and disposal in household waste is not recommended.

User manual by Girts Ozolins@Erica Synths.

Design by Ineta Briede@Black8.

Copying, distribution or any commercial use in any way is

prohibited and needs the written permission by Erica Synths.

Speciﬁcations are subject to change without notice.In case of

any questions, feel free to contact us through www.erica-

synths.lv.

You will ﬁnd Erica Synths terms of warranty at

www.ericasynths.lv

Items for return, exchange and/or warranty repair have to

be registered at SUPPORT on www.ericasynths.lv and send

back to us according to instructions in the support page.

SAFETY INSTRUCTIONS

Please follow the instructions for use of the Erica Synths module below,

‘cause only this will guarantee proper operation of the module and

ensure warranty from Erica Synths.

Water is lethal for most of the electric devices, unless they are made

waterproof. This Erica Synths module is NOT intended for use in a

humid or wet environment. No liquids or other conducting

substances must get into the module. Should this happen, the

module should be disconnected from mains power immediately,

dried, examined and cleaned by a qualiﬁed technician.

Do not expose the module to temperatures above +50° C or below

-20° C. If you have transported module in extreme low temperatures,

leave it in room temperature for an hour before plugging it in.

CUTOFF

IN LEVEL

CV1 LEVEL

RESONANCE

RESO CV LEVEL

INPUT CV1 CV2 OUT

BLACK HIGH PASS VCF

RESO CV IN

OFF

DRIVE

BW CVCF CV

OUTIN2IN1

BLACK VCF COUPLER

OFF

MODE

CENTER FREQ

CF CV LVL

BANDWIDTH

OUTPUTVCA CV INVCF CV ININPUT

CV2

CUTOFF

BLACK 3109 VCF/VCA

OFF

VOL COMP

AUDIO LVL RESONANCE

VCF CV1 LVL VCA CV LVL

The Black 3109 VCF/VCA has a hidden feature – compatibility with the Black Filter Coupler connector.

The Erica Synths Black Filter Coupler is a satellite module for the Black High Pass and the Black Low

Pass VCFs and now also the Black 3109 VCF/VCA. Similar to classical Moog systems, it turns both

high-pass and low-pass ﬁlters in to Bandpass and Band Reject ﬁlters with adjustable and CV

controllable bandwidth and centre frequency and therefore signiﬁcantly expands the functionality

of your modular system. Please note that the Black Filter Coupler works only with Erica Synths

modules and you need both the Black High Pass and Low Pass VCFs.

This is a Eurorack

standard PSU connector.

Remove the jumper and

connect the Erica Synths

Black Filter Coupler here.

2x5pin ribbon cable is

supplied with the Black Filter

Coupler module.

Product specificaties

Merk:	Erica Synths
Categorie:	Niet gecategoriseerd
Model:	Black 3109 VCF/VCA

Heb je hulp nodig?

Als je hulp nodig hebt met Erica Synths Black 3109 VCF/VCA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Erica Synths

Erica Synths Dual Drive Handleiding

3 Augustus 2023

Erica Synths Fusion VCO2 Handleiding

9 Juli 2023

Erica Synths Black DJ VCF Handleiding

7 Juli 2023

Erica Synths Black Dual VCF Handleiding

1 Juli 2023

Erica Synths Pico Multi Handleiding

1 Juli 2023

Erica Synths Hi-Hats A Handleiding

30 Juni 2023

Erica Synths Black VC Clock Handleiding

26 Juni 2023

Erica Synths Black Modulator v2 Handleiding

23 Juni 2023

Erica Synths Black DADSR EG Handleiding

23 Juni 2023

Erica Synths Pico LPG Handleiding

22 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024