Ergotron ZHHCG Handleiding

Ergotron Multimedia kar ZHHCG

Bekijk gratis de handleiding van Ergotron ZHHCG (4 pagina’s), behorend tot de categorie Multimedia kar. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 1.5 reviews. Heb je een vraag over Ergotron ZHHCG of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/4

A S S E M B LY I N S T R U C T I O N S

Anthro Corporation

| 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

Zido

8" Handle

Rev A, August 2010

Product Part#

Zido Handle 8" ZHHSB

NOTE: Shown on a Zido Pole Cart, sold separately.

WELCOME

Thank you for purchasing the

Zido 8" Handle. If you have any

questions or if we can help you

in any way, please contact us at

800.325.3841.

TOOLS

A 1/8" Hex Key is provided for this

assembly. You'll also use the 5/32"

hex Anthro driver which came with

your Zido cart.

A 3/8" socket, nut driver, or wrench

is required but not provided.

PARTS LIST

Before beginning assembly of your Zido 8" Handle, please

review the parts list to verify that your shipment is complete.

The fastener quantities listed here are the minimum required

for your assembly. You may receive a few extras.

Product Quantity Part Number

01 Zido 8" Handle Bracket 1 225-2986-00

02 Zido 8" Handle Support 1 225-2985-00

03 Zido 8" Handle Tube 1 125-5337-00

04 Zido 8" Handle Wrap 1 175-5275-00

(Not shown; installed on the tube at the factory.)

05 1/2" Self-threading Screws 3 325-5464-00

06 1/2" Flat-head Screws 4 325-5193-00

07 2" Button-head Screws 2 325-5034-00

08 10-24 Nylock Nut 4 325-5186-00

09 1/8" Hex Key 1 375-5015-00

(Not shown.)

Zido Handle 8" Assembly Instructions

STEP 2

Install the Handle Support

¡ Align the Handle Support with the Handle

Bracket so that the curved side is on the

bottom and the ﬂat side is on top.

¡ Feed one 1/2" Button-head Screw through

the Handle Support and the Handle Bracket

and loosely capture with a Nylock Nut.

Repeat for the remaining three screws and

nuts, then tighten. Use the provided 1/8"

Hex Key and your own 3/8" socket, nut

driver, or wrench to tighten the fasteners.

STEP 1

Install the Handle Bracket

¡ Select the installation point for the handle.

¡ Align the handle Bracket with the holes on

the column or Extension Tube.

¡ Install the Handle Bracket with three 1/2"

Self-threading Screws.

STEP 3

Install the Handle Tube

¡ Align the Handle Tube with the holes on the

support.

¡ Using the 5/32" hex Anthro driver (it came

with your cart), loosely attach with two 2"

button-head screws.

¡ Tighten all the screws on the support, the

bracket, and then on the tube.

Self-threading Screw

325-5464-00

2” Button-head Screw

325-5034-00

Nylock Nuts

325-5186-00

Product specificaties

Merk:	Ergotron
Categorie:	Multimedia kar
Model:	ZHHCG
Kleur van het product:	Grijs
Gewicht:	1800 g
Materiaal behuizing:	Staal
Land van herkomst:	Verenigde Staten
Materiaal:	Staal
Afmetingen (B x D x H):	305 x 230 x 100 mm