Epson Pro Cinema EH-QB1000B Handleiding

Bekijk gratis de handleiding van Epson Pro Cinema EH-QB1000B (4 pagina’s), behorend tot de categorie Beamer. Deze gids werd als nuttig beoordeeld door 47 mensen en kreeg gemiddeld 4.4 sterren uit 6 reviews. Heb je een vraag over Epson Pro Cinema EH-QB1000B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Setup

IMPORTANT: Before using this product, make sure you read these instructions

and the safety instructions in the online User’s Guide.

Note: Your product may differ from the illustrations on this sheet, but the

instructions are the same.

Choose a location

Keep the projector level and place it at a height so its lens is even with the top

or bottom of the screen and is centered horizontally. If this isn’t possible, use the

lens shift feature to reposition the image (see “Adjust the image”).

See the online User’s Guidefor more information on where to place your

projector.

Connect the projector

Connect multiple video devices and use the buttons on the remote Source

control or the button on the projector to switch between them. For Source

additional connection types, see the online User’s Guide.

HDMI

TM

cable

Power supply

USB cable

Streaming

device

Note:

• When projecting images at 4K 120Hz, use an HDMI 2.1 rated cable (ultra-high

speed).

• You can output audio to an external sound system that supports

using the HDMI

™

2 (eARC/ARC)port.

• If you are connecting an optical HDMI cable that has a power supply USB cable,

you must also connect the cable’s USB power connector to the Opt.HDMI

™

(300mA) port.

Wired network

Connect the projector to your network using an Ethernet cable. See “Wired

network configuration” for more information.

Ethernet cable

Turn on your equipment

1

Plug in the projector.

2

Press the power button on the projector or the button on the On

remote control. The shutter opens and the power light flashes blue,

then stays on.

Note: To shut down the projector, press the power button on the

projector or the button on the remote control, then press the Standby

button again to confirm, if necessary. Wait for cooldown to complete

before unplugging the projector.

3

Use the arrow and Enter buttons on the remote control to select the focus,

image orientation, and language settings.

Note: To change these settings, see the online User’s Guide.

4

Turn on your video source.

5

If you don’t see an image, press one of the Source buttons on the remote

control to select the image source.

Note: If you still see a blank screen or have other display problems, see the

troubleshooting tips on this sheet.

Using the remote control

Install the batteries as shown (two AA batteries).

Choose which source to

display

Turn projector on

Access projector menus

Adjust zoom, focus,

and lens shift

Turn off projector

display

Navigate projector

menus

Turn projector off

Control connected

sources with HDMI

Link

For more information on using the remote control, see the online User’s Guide.

EH-QB1000B/EH-QB1000W

Product specificaties