Epson Expression XP-830 Handleiding

Bekijk gratis de handleiding van Epson Expression XP-830 (4 pagina’s), behorend tot de categorie Printer. Deze gids werd als nuttig beoordeeld door 34 mensen en kreeg gemiddeld 4.1 sterren uit 2 reviews. Heb je een vraag over Epson Expression XP-830 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Start Here

4

Load paper

See the online User’s Guide for instructions on loading paper in

the cassette 1 and rear paper slot, available paper types, sizes,

loading capacity, and loading CD/DVD/Blu-ray

™

discs (XP-630/

XP-830).

XP-630/XP-830

Output tray

Cassette 1Cassette 2/front cover

You can load the following paper sizes:

• Cassette 1: 3.5 × 5-, 4 × 6-, or 5 × 7-inch photo paper

• Cassette 2: Letter-size, A4-, legal-size, or 8 × 10-inch paper

See the instructions below for loading paper.

• Rear paper feed slot: One sheet at a time (XP-830)

XP-530

Output tray

Cassette/front cover

You can load the following paper sizes: 3.5 × 5-, 5 × 7-, 8 × 10-

inch, letter-size, A4-, or legal-size.

1 Lower the front cover (if it’s not open already) and pull on

the front cover to pull out the paper cassette.

2 Slide the side edge guides outward and set the front edge

guide to the paper size you are using.

3 Insert the paper with the glossy or printable side

facedown.

Note: Make sure the paper is loaded against the front edge

guide and not sticking out from the end of the cassette.

Read these instructions before using your product.

The illustrations show the XP-830, but the steps are the same for

the XP-530 and XP-630.

Note for Spanish speakers/Nota para hispanohablantes:

Paraobtener instrucciones de configuración en español, consulte

laGuíade instalación en epson.com/support/xp530sp,

epson.com/support/xp630sp o epson.com/support/xp830sp

(requiereuna conexión a Internet).

1

Unpack

(XP-630/XP-830)

Note:

• Do not open ink cartridge packages until you are ready to install the

ink. Cartridges are vacuum packed to maintain reliability.

• The CD/DVD tray is taped to the bottom of cassette 2.

1 Remove all protective materials from the product.

2 Lift up the scanner unit and remove all protective

materials.

3 Lower the scanner unit.

2

Turn on and configure

1 Connect the power cord to the back of the printer and to

an electrical outlet.

Caution: Do not connect to your computer yet.

2 Turn on the product, then adjust the control panel.

3 Select these settings:

XP-530/XP-630: Language

XP-830: Language, country, date, and time

Note:

• You can change these settings later using the product’s control

panel. For more information, see the online User’s Guide.

• If an error message appears, turn off the product and check

that no protective material has been left inside the product.

3

Install ink cartridges

1 Lift up the scanner unit.

Caution: Do not touch the flat, white cable.

2 Gently shake the Black (BK) ink cartridge. Do not shake

Photo Black (PBK) or other ink cartridges.

3 Unpack the ink cartridges.

Caution: Do not touch the areas shown below. Doing so may

prevent normal operation and printing.

4 Remove the cap from each ink cartridge. Store the caps in

the included plastic bag.

Note: Save the caps and use them to recap the ink cartridges

after removing them for storage or disposal.

5 Insert the cartridges at an angle in the holder for each

color. Press each cartridge down until it clicks.

6 Lower the scanner unit.

7 The printer starts charging the ink. Ink charging takes

approximately 7 minutes. When you see a completion

message on the printer’s LCD screen, charging is

complete.

Caution: Don’t turn off the printer or raise the scanner unit while

the printer is charging or you’ll waste ink.

Note:

• The printer is designed for use with Epson

®

cartridges only, not

third-party cartridges or ink.

• The cartridges included with the printer are designed for

printer set up and not for resale. After some ink is used for

charging, the rest is available for printing.

XP-530/XP-630/XP-830 Small-in-One

®

Printer

Product specificaties