Epson ELPMB45 Handleiding

Epson Beamer ELPMB45

Lees hieronder de 📖 handleiding in het Nederlandse voor Epson ELPMB45 (64 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/64

ELPMB45

Installation Guide

Guide d’installation

About This Installation Guide

This guide describes how to mount the short-throw projectors BrightLink® 536Wi and PowerLite® 520/525W/

530/535W to a wall using the Epson® wall mount.

Safety Instructions

For your safety, read all the instructions in this guide before using the wall mount. Incorrect handling that

ignores instructions in this guide could damage the wall mount or could result in personal injury or property

damage. Keep this installation guide on hand for future reference.

Read the safety instructions in the online User's Guide for your projector and follow the instructions in this

document.

Explanation of Symbols

The warning marks shown below are used throughout this installation guide to prevent personal injury or

property damage. Make sure you understand these warnings when reading this installation guide.

Safety Precautions for Installation

Not all models are available in all markets.

This symbol indicates information that, if ignored, could possibly result in personal injury or even death

due to incorrect handling.

This symbol indicates information that, if ignored, could possibly result in personal injury or physical

damage due to incorrect handling.

This symbol indicates related or useful information.

This symbol indicates helpful tips.

Symbol indicating an action that must not be done

Symbol indicating an action that should be done

The wall mount is designed specifically for mounting a projector and optional accessories to a wall. If

anything other than a projector and optional accessories are mounted, the weight may result in damage.

If the wall mount falls, it could cause personal injury or property damage.

The installation work (wall mounting) should be performed by specialists who have technical knowledge

and ability. Incomplete or incorrect installation could cause the wall mount or projector to fall and cause

personal injury or property damage.

Follow the instructions in this guide when installing the wall mount.

If the instructions are not followed, the wall mountmay fall, resulting in personal injury or property damage.

Warning

Caution

Warning

English

Turn off the projector when installing the mount to avoid fire or electric shock.

Handle the power cord carefully.

Incorrect handling may cause fire or electric shock. Observe the following precautions when handling:

• Do not handle the power plug with wet hands.

• Do not use a power cord that is damaged or modified.

• Do not pull the power cord with too much force when routing them through the wall mount.

Do not install the wall mount in a place where it might be subjected to vibration or shock.

Vibration or shock could cause damage to the projector or mounting surface. It could also cause the wall mount or

projector to fall and cause personal injury or property damage.

Install the wall mount so that it can sufficiently support the weight of the projector and wall mount, and

resist any horizontal vibration. Use M8 nuts and bolts.

Nuts and bolts smaller than M8 could cause the wall mount to fall. Epson accepts no responsibility for any damage

or injury caused by lack of wall strength or inadequate installation.

The installation work should be performed by at least two qualified service personnel. If you need to

loosen any screws during installation, be careful not to drop the wall mount.

If the wall mount or projector falls, it could cause personal injury or property damage.

When installing the wall mount, do not hold on to the cable cover to position the mount.

Holding the mount by the cable cover could cause the cover to deatch, resulting in personal injury or property

damage.

When you mount the projector on the wall with the wall mount, the wall requires enough strength to hold

the projector and the wall mount.

This wall mount should be installed on a concrete wall. Confirm the weight of the projector and the wall

mount before installation, and maintain the strength of the wall. If the wall is not strong enough, reinforce

the wall before installation.

If you need to loosen any screw while installing, be careful not to drop the projector or the mount.

If the wall mount or projector falls, it could cause personal injury or property damage.

Inspect the wall mount on a regular basis to ensure there are no broken parts or loose screws.

If there are any broken parts, stop using the wall mount immediately. If the wall mount or projector falls, it could

cause personal injury or property damage.

Never modify the wall mount.

Do not hang on the wall mount or hang a heavy object on the wall mount.

If the projector or wall mount falls, it could cause personal injury or property damage.

Stop using the mount and contact Epson if any of the following occur:

• The mount is dropped or damaged during installation.

• The arm unit detaches from the wall or falls.

Do not use adhesives, lubricants, or oils to install or adjust the wall mount.

If you use adhesives to prevent the screws from loosening or things such as lubricants or oils on the part of the

projector attached to the slide plate, the case may crack and cause the projector to fall, resulting in personal injury

or property damage.

Tighten all screws firmly after adjustment.

Otherwise, the projector or wall mount may fall and cause personal injury or property damage.

Never loosen the bolts and nuts after installation.

Confirm that the screws have not become loose on a regular basis. If you find any loose screws, tighten them

firmly. Otherwise, the projector or wall mount may fall and cause personal injury or property damage.

When performing wiring, make sure the cable does not come into contact with any screws or bolts.

Handling the cable incorrectly may cause fire or electric shock.

Warning

Product specificaties

Merk:	Epson
Categorie:	Beamer
Model:	ELPMB45
Kleur van het product:	Wit
Gewicht verpakking:	14.02 g
Breedte verpakking:	290 mm
Diepte verpakking:	940 mm
Hoogte verpakking:	315 mm
Montagewijze:	Muur
Land van herkomst:	China
Maximale gewichtscapaciteit:	- kg
Aantal per verpakking:	1 stuk(s)
Compatibele producten:	EB-520, EB-525W, EB-535W
Producten per pallet:	14 stuk(s)
Code geharmoniseerd systeem (HS):	83024190
Producten per pallet (UK):	21 stuk(s)