Epcom TT388M Handleiding

Epcom AV extender TT388M

Lees hieronder de 📖 handleiding in het Nederlandse voor Epcom TT388M (2 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

1. Smart por table design, wonderful performance.

2. Highest resolution up to 1080p full HD.

3. Strong anti-interference ability by running at 5GHz operation frequency .

4. Support point to point configuration, one to many (1 to 2) configuration

and many to many (2 to 2, 2 to 1) configuration.

5. Support IR passback with 20-60KHz frequency.

6. Supports button control to set channels and IR contoller to switch and

choose input sources from receiver side.

7. 50m long range transmission distance.

· Package Contents

· Important Safety Notice

· Introduction

· Features

· Installation Requirement

· Panel Des cription

HDMI Extender TX

sender x1pcs

HDMI Extender RX

receiver x1pcs

DC5V/2A power

adapter x2pcs

IR blaster extension

cable x1pcs

IR receiver extension

cable x1pcs

User manual

x1pcs

This HDMI wireless extender includes transmitter unit and receiver unit,

allows to transmit and extend HDMI signal up to 50 meter s long away

wirelessly, it has strong anti-interference ability by running at 5GHz

operation frequency. This wireless extender not only suppor ts point to

point configuration, but also supports one to many (1 to 2) and many to

many (2 to 2, 2 to 1) configuration. This extender supports wide range IR

passback frequency 20-60KHz to realize remote control of source devices

from receiver side. With both button control and IR controller, makes

channel setting easily. It is really a very good solution for transmitting one

or more HDMI source signal to one or more screens in long distance

without running wires simultaneously, perfect for application of

conference, home entertainment and education etc.

Note:

1) Transmission distance will be different due to the environment.

2) Wall, brick or glass will shorte n the signal cover range or cause big

signal loss.

1. HDMI source device (DVD, PS3, Set top box, PC etc)

2. HDMI display device like SDTV, HDT V, and projector with HDMI port.

1. HDMI Extender TX sender

2.HDMI Extender RX receiver

Please read below safety instructions carefully before installation and

operation:

1. Please pay attention to all the warnings and hints on this device.

2. Do not expose this unit to rain, moisture and liquid.

3. Do not put any stuff into the device.

4. Do not repaire the device or open the enclosure without professional

person guidence to avoid electronic shock.

5. Make sure good ventilation openings to avoid product overheating

damage.

6. Shut off power and make sure environment is safe before installation.

7. Do not plug-in/out the network cables and IR cables when it is in using

to avoid cables damage.

8. Use DC5V only. Make sure the specification matched if using 3rd party

DC adapters.

IR blaster extension

cable interface

Connect with IR blaster extension cable. Please

put the IR blaster close to source device to

better transmit the IR signal from receiver

Connect with HDMI source device

HDMI input

Connect with DC5V/2A power adapter

Power input

Launch wireless signal

Antenna

HDMI signal indicator

Wireless connections

indicator

IR receiver extension

cable interface

Connect with IR receiver extension cable. Please

make sure the remote control is within the required

range of IR receiver

Connect with HDMI display deviceHDMI output

Connect with DC5V/2A power adapterPower input

Receive wireless signal

Antenna

Wireless connections

indicator

Data transmission

indicator

Led blinks slowly when it is building connection.

Led blinks fast when it is successfully connected

and transmitting data

HDMI signal input, it always on

Input CHANNEL

indicator

Indicate the input CHANNEL as a number, and

when the CHANNEL of transmitter as same as

the CHANNEL of receiver, wireless transmission

connected

It’on when the transmitter and the receiver

connect well with each other, other wise, it’off

It’on when the transmitter and the receiver

connect well with each other, other wise, it’off

1. Point to Point connection:

2. One to two connection:

Remote controller

×1pcs

HDMI display

3) It is recommended that the distance between each unit should be more

than 5 meters.

8 9

Digital control button

Display CHANNEL channel parameters

IR remote control

window

IR remote control

window

Receive IR remote control signal

Output CHANNEL

indicator

Indicate the output CHANNEL as a number, and

when the CHANNEL of transmitter as same as

the CHANNEL of receiver, wireless transmission

connected

HDMI Wireless Matrix Extender

Disclaimer

The product name and brand name may be registered trademark of related

manu facturers.TM a nd ® m ay be omitted on the user manual. The pict ures

on the user manua l are just f or referenc e, and there may be some slight

difference with the real products.

We reserve the rights to make c hanges without further notice to a product

or system described herein to improve reliability, function or d esign.

Connection instruction :

1) Connect HD MI input with HDMI s ource device and connect IR blaster

extension cable wit h IR OUT interface of the sender (TX).

2) Connect HD MI output with HDM I display device and c onnec t IR receiver

extension cable wit h IR IN interfa ce.

3) Power on the device (power led lights ) and it works.

Note :

1) When the wireless signal tran smits through wall, g lass or other

obstacles, it w ill cause signal loss. Please install this devic e in

good environment with few obst ac les.

2) This wireless matrix can support up to 2 transmitter work with 2 receivers

simultaneously, plea se make sure each device keep 5 meters away from

others at least.

3) The environment wireless signal will affect transmission, such as

microwa re, wireless mouse and keyboard etc .

· FAQ

Q: Transmitter and receiver can t be connected w ith eac h other?'

A: 1) Please chec k and make sure both receiver and transmitter ha ve been

powered o n

2) Please check a nd make sure the input channel of t he transmitter and

the output channel of the receiver a re the same.

Q: The wifi LED indicato r of the transm itter kee ps on, but no s ignal output

on dis play/monitor?

A: 1) please check if there is an H DMI signal inp ut of sender TX

2) Try to connect the signal source d irectly to display device to see if

there is signal ou tput from so urce device or change the signal

sourc e, HDMI cables and try again.

Q: Display not fluent and stable

A: 1) Please move the p osition of sender (TX) and receiver (RX) and make

sure the device is within the s ignal c overage.

2) Press “reset” button on the TX/RX pane l, reset and re connect.

3) Re move ot her wireless s ignal d isturbance and reduce the

obstac le on the way.

· Specification

Power

supply Voltage/Current

Power consumption

DC /5V 2A

TX 7 Rx 5W＜ W ＜

HDMI

performance

and interface

Supports au dio formats L R stereo audio/

Maximum transfer rate 10.2Gbps

Input and output DDC signal 5Vp-p(TTL)

Audio signal

transmissio n forma t L R/ stereo audio

Input and output TMDS signal 0.5～1.5Vp- p(TMDS)

Input cable length supported ≤5m(AWG26 HDMI1.3cable standard)

Output cable length supported ≤5m(AWG26 HDMI1.3cable standard)

Transmission m ethod 5.8G Wireless tran smiss ion

Latency ≤200 ms

Wireless

performance

and interface

performance

and interface

Transmission d istance 50 Meters

HDCP1.2

HDMI resolution su ppor ted

480i@60Hz 480p@60Hz、、

576i@50Hz 576p@50Hz、、

720p@50/60Hz 1080i@50/60Hz、、

1080p@50/60Hz

HDMI complian ce HDMI1.3

HDCP compliance

Support IR passback wi th

20-60KHz frequen cy

IR remote control

Electrostatic protection

of the whole machine

1a Contact discharge level 3

Protection

level

Worki ng tempe rature 0～50℃

Storage temp eratu re -10～70℃

Humidity (no co nden satio n) 0～90%

Operating

environment

Support many

to many

3. Matrix connections

HDMI display

Material Iron alloy material + crystal panel

Dimension

Processing technol ogy Sandblastin g

Colour black

Mean time between failures

(MTBF) >30000 Hours

Weigh t TX： g，RX： g 200 200

Body

propert ies

Reliab ilit y

95(W) x 120.58(D) x 20.1(H)mm

1b Air discharge level 3

Standard: IEC61000-4-2

Product specificaties

Merk:	Epcom
Categorie:	AV extender
Model:	TT388M
Kleur van het product:	Zwart
Gewicht:	200 g
Breedte:	120.58 mm
Diepte:	95 mm
Hoogte:	20.1 mm
Soort:	AV-zender & ontvanger
Connectiviteitstechnologie:	Draadloos
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1080 Pixels
HDCP:	Ja
Aansluiting voor netstroomadapter:	Ja
Ondersteunde grafische resoluties:	1920 x 1080 (HD 1080)
Remote (IR) ingang:	1
Aantal:	1
Frequentie:	5000 MHz
Remote (IR) uitgang:	1
HDMI in:	1
Aantal HDMI-uitgangen:	1
Geïntegreerde antenne:	Ja
Maximaal bereik:	50 m
Stroomverbruik (typisch):	5 W